DAC Worldwide’s Shunt Wound, DC Motor Training System (415-000) features a common shunt wound DC motor used frequently throughout industry. Each motor module includes a welded aluminum mounting baseplate, aluminum control box support structure, and a steel control enclosure.
The Backfilling 1 module of Simlog’s Bulldozer Personal Simulator introduces trainees to essential earthmoving tasks in a controlled, virtual setting. Operators learn how to manage blade position, material flow, and movement control to efficiently backfill trenches and depressions—skills critical on real-world construction sites.
This video demonstrates how the simulator reinforces key techniques like forward pushing, blade leveling, and maintaining smooth, consistent backfill layers. With a focus on safety, precision, and production efficiency, this module helps new operators gain confidence while reducing risk and training costs.
Simlog Mobile Crane Personal Simulator's Pole Topping Module has trainees lifting a rubber tire load onto the tops of a series of poles in order. The target pole is marked with blue rings that will turn green once the pole has been topped.
Simlog Mobile Crane Personal Simulator's Pole Placement Module has trainees carefully lift the pole off the ground and then place it into the target hole (the target changes color as the pole gets closer) while avoiding obstacles and unstable positions.
Simlog Mobile Crane Personal Simulator's Corridor Following 4 Module has trainees move the concrete bucket along the three-section, z-shaped corridor on the ground from one end to the other, keeping the bucket at a constant height directly above the corridor while controlling sway.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Mobile Crane Personal Simulator's Pick, Lift, and Place Module has trainees configure the boom angle, extension mode, and length and then place the hook in the rigging target (blue sphere) above the load. Once triggered, lift the load and place it into the target. Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Signaling Module has trainees move a load to a target destination hidden from the view of the crane operator, and so a signal person is required.
The signal person must view the lift using the dedicated signal-person display and provide hand or voice signals to the crane operator to safely move the load into the target (the target changes color as the load gets closer).
Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the crane operator activates the horn. Telescope extend/retract control is disabled for this module.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Off-Highway Truck Personal Simulator's Corridor Driving 1 Module has trainees drive the truck through the corridor to the target. Each trial ends when the truck is over the target and parked (gear in Park, or gear in Neutral with parking brake engaged).
Simlog Off-Highway Truck Personal Simulator's Complete Haul Cycle 2 Module has trainees drive the truck from the dumping zone to the wheel loader. After the truck is fully loaded by the loader, return the dumping zone, dump the load and drive away.
Simlog's Reach Lift Truck Personal Simulator: Slalom 1 Forward Driving - pick up the load, drive forward through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Slalom 2 - Pick up the load, drive in reverse through the slalom course, and place the load on the floor at the target position defined by a red outline.
Pages
-
Item Number:415-000 -
Item Number:272-715DAC Worldwide's Dissectible Sight Flow Indicator Sample (272-715) allows for close visual inspection of a common in-line flow indicator to better understand its function, design, and operation. -
Item Number:373-652This Sightglass with Moisture Indicator Cutaway provides a full cutaway view of a sightglass that exposes the complete internal components and operating principles. -
With the Signalperson Training Station, trainees learn critical worksite skills, such as communication and teamwork, in a safe environment. The Signalperson Training Station is designed to work with CM Labs’ crane Training Packs, including Luffing Tower Crane, Flat-top Tower Crane, Crawler Crane, and Mobile Crane. -
Boost simulator training ROI with CM Labs' SimGuide—custom integration plans, trainer certification, and performance metrics tailored to your organization’s goals. -
SimSpray is a complete virtual reality paint training tool that reduces training time, increases efficiency, and helps you produce highly skilled workers. Tailor your training to meet industry needs with SimSpray’s enterprise, paint, powder, or blast models and HVLP edge-blending, aerospace, or furniture and cabinetry add-on packs. -
SimSpray Go is a compact, affordable virtual reality paint training tool that offers a lightweight and portable training experience. This out-of-the-box, tabletop VR painter training tool offers efficiency and effectiveness for your training programs. SimSpray Go delivers all the training benefits of virtual reality at a budget-friendly price point. -
Item Number:273-930This single-phase, capacitor-start induction motor cutaway supports industrial training activities related to electric motor types, as well as repair and troubleshooting. A fractional horsepower, industrial-duty motor is modified for training purposes. -
Item Number:273-950DAC Worldwide’s Single-Phase PSC AC Motor Cutaway (273-950) is one of a series of related sectioned motors. This permanent split capacitor (PSC) motor cutaway supports industrial training activities related to electric motor types, as well as HVAC system repair and troubleshooting. -
Item Number:273-912DAC Worldwide’s Single-Phase Transformer Cutaway (273-912) is a detailed and professionally-crafted single-phase transformer cutaway that depicts a common shell-type, single-phase transformer.
