From ideation to creation, the J8 Series delivers a fully-functioning, multi-material, Pantone™ validated prototype 200% faster than traditional methods.
The Selective Pallet Racks 1 – Low Shelves module in Simlog’s Stand Up Counterbalanced Lift Truck Personal Simulator focuses on developing the precision and awareness required to place and retrieve pallets from low rack positions. Operators must carefully align forks, control lift height, and navigate tight aisle space—common challenges in real-world warehousing.
This demo shows how trainees build accuracy and confidence in low-level pallet handling, helping reduce product damage and improve efficiency in distribution centers. It's a foundational skill for both new learners and seasoned operators needing refresh training.
Module 15: Cantilever Racks and Flatbed Truck has trainees working with cantilever racks and a flatbed truck, picking up each marked load and placing it at its target position defined by an outline of the same color as the load, using the overhead map for guidance.
Simlog's Reach Lift Truck Personal Simulator puts you at the controls of a typical stand-up narrow aisle lift truck with a scissors-like pantograph to extend and retract the forks. Training scenarios are typical of warehouses and distribution centers where racking systems are tall and closely spaced to increase storage density.
Industrial Controls:
A superior simulation experience with OEM elements
Key Benefits:
- OEM Multi-Task Handle (two options)
- Steering Tiller
- Foot Brake Pedal Unit
- Two pushbuttons for alternative viewpoints
- Mini-joystick to pan/tilt current viewpoint
- Emergency power disconnect pushbutton
- Front panel key lock
Simlog's Reach Lift Truck Personal Simulator puts you at the controls of a typical stand-up “narrow aisle” lift truck with a scissors-like pantograph to extend and retract the forks. Training scenarios are typical of warehouses and distribution centers where racking systems are tall and closely spaced to increase storage density.
Scalable, Full-Immersion Operator Training Platform
The Vortex Advantage by CM Labs is a high-performance, full-immersion training simulator designed for hands-on, realistic instruction in heavy equipment operations. Engineered for flexibility and longevity, it supports a wide variety of crane and earthmoving equipment with hot-swappable control sets and scalable display configurations.
Built with a rugged steel frame and industrial-grade components, the Vortex Advantage withstands the demands of round-the-clock training—whether in classrooms or mobile trailers. Its three-screen and five-screen options offer lifelike equipment sightlines, while the motion platform replicates real equipment vibrations and movement, enhancing operator realism and skill transfer.
Operators can easily navigate training modules using a built-in touchscreen interface that replicates the operator dashboard, including LMI/SLI indicators, auxiliary controls, and more. Instructors benefit from built-in classroom management tools and optional instructor stations, enabling progress tracking, exercise switching, and even multi-simulator crew coordination for tandem lift training.
Monitor, assess, and engage construction equipment operator trainees from a single workstation
CM Labs’ Instructor Operating Station (IOS) gives instructors complete control of operator training sessions. You can initiate exercise sessions, monitor operations from your seat, and challenge trainees by exposing them to various tasks and job site conditions. It is the only solution on the market that provides instructors with a real-time 3D view of learning progress from any vantage point on the virtual work site.
Benefits
- Challenge trainees for maximum learning effectiveness
- Benchmark trainees easily with smart assessment tools
- Enable full team-based training in a single classroom
Operator training and assessment, whenever and wherever needed.
CM Labs’ Mobile Training Center allows organizations to offer training and assessment where needed most. Whether on the road or at remote locations, the Mobile Training Center was designed for all-season versatility and use.
Benefits
- Multiply your training capabilities
- Bring training to the job site
- Memorable branding
Train to worksite standards in the classroom
With CM Labs Simulations’ Signalperson Training Station, trainees learn critical worksite skills, such as communication and teamwork, in a safe environment. While one trainee operates a crane on a Vortex simulator, another works cooperatively within the virtual job site, providing signals and guiding the operation through to successful completion via a webcam and picture-in-picture display.
Trainees can move around the worksite to inspect the lifting area, recognize potential hazards, gain a clear view of all site activities, and provide hand signals to the crane operator.
Together, they either fail as a team — or succeed as a team. The result: new operators that are better prepared for any job site.
Simulator Adoption Made Easy with CM Labs’ SimGuide Service
CM Labs’ SimGuide Service is designed to simplify the integration of your new simulator. We’ll guide you throughout the process of setting up and implementing your simulator, no matter what your objective.
With the SimGuide Service, you get a complete road map detailing how and when to use your simulator to meet your targets.
The SimGuide Service is for organizations at any stage of simulator adoption, whether developing a simulation-based training program for the first time, or extending the use of existing their CM Labs simulators.
CM Labs’ Excavator Simulator Training Pack: Operator readiness for today’s job sites.
CM Labs’ Excavator Simulator Training Pack is an all-in-one solution for learning critical operator skills, including basic operations, advanced skills, worksite collaboration, and the latest operator assistance technology.
There’s no simpler or safer way to prepare operators for the tools that are part of today’s highly technical job sites.
Pages
-
Item Number:J850 Pro / J850 Prime / J826 Prime -
The J850™ TechStyle™ 3D printer is powered by 3DFashion™ technology and provides full-color, multi-material capabilities for designs that can be printed directly to fabric, garments, footwear, and luxury accessories, delivering results that are not possible with traditional methods. -
Item Number:Neo450e / Neo450sThe Stratasys Neo450e is an affordable industrial-grade 3D printer producing small to medium parts with consistent accuracy and repeatability. The Neo450s offers performance and versatility along with all the benefits of Neo450e. -
Item Number:NEO800The open-system Stratasys Neo800 3D Printer uses Stereolithography (SL) technology to delivers high-quality parts with superior surface quality, accuracy, and detail at unprecedented speeds. -
Objet30 Prime offers four additional materials expanding to rubber-like materials for soft-touch features, flexible components, and even bio-compatible for medical device prototyping and end-use parts such as surgical guides. -
-
Item Number:275-125DAC Worldwide’s Submersible Vertical Turbine Pump Dissectible (275-125) is an actual industrial pump for use in classroom and laboratory training relating to process pumps. -
Item Number:275-120DAC Worldwide’s Submersible Vertical Turbine Pump Dissectible (Goulds/IR/Durco/Aurora) (275-120) is an actual industrial pump for use in classroom and laboratory training relating to process pumps. -
Item Number:295-407DAC Worldwide's Sucker Rod Pump Component Sample Set (295-407) is a wall-mountable set of actual and replica sucker rod pump rod string components that allows for realistic demonstration and training. -
Item Number:100-00Dive into hands-on STEM learning with LJ Create's Sustainable Energy Production Teaching Set (100-00). Download our brochure for detailed information on included hardware, digital curriculum materials, and optional cloud-based software for interactive learning experiences.
