DAC Worldwide’s Circuit Breaker Cutaway Set (273-906) is a detailed, sectioned, professionally-crafted set of two circuit breaker cutaways that unveils the internal construction and operating mechanism of commonly-encountered single-pole and three-pole circuit breakers found within industrial and commercial electrical systems for circuit protection.
Somos® TaurusTM brings the combination of thermal and mechanical performance that until now was not possible with stereolithography materials. Its robustness combined with a charcoal grey appearance makes it ideal for the most demanding functional prototyping and even end-use applications.
An optically clear stereolithography material tailored for colorless, functional parts with excellent temperature resistance.
Somos® WaterClear Ultra 10122 is an optically clear stereolithography material that is easy to use and fast to build. This material produces colorless, functional, and accurate parts that simulate an acrylic appearance. Parts produced with Somos® WaterClear Ultra 10122 exhibit excellent temperature resistance.
Somos® WaterClear Ultra 10122 is ideal for applications such as master patterns, concept, and functional models. This material also provides refractive values similar to engineered plastics for functional testing in optical light transmission work.
Somos® WaterClear® Ultra 10122 is an optically clear stereolithography material that is easy to use and fast to build. This stereolithography material produces colorless, functional, and accurate parts that simulate an acrylic appearance. Parts produced with Somos WaterClear Ultra 10122 exhibit excellent water and temperature resistance.
Somos® WaterShed AF is a multi-purpose stereolithography resin that meets the requirements for investment casting patterns. With processing and properties similar to Somos® WaterShed XC 11122, this resin can also be used for general-purpose prototyping and other applications.
Somos® WaterShed® AF is a multi-purpose stereolithography resin that meets the requirements for investment casting patterns, as it is antimony-free. Patterns created with Somos WaterShed AF leave much lower ash residue after burnout, reducing clean-up and speeding up mold production.
Multipurpose resin that prints 50% faster than alternatives eliminating the need for painting.
Somos®® WaterShed XC 11122, has up to a 50% faster processing speed, offering minimal finishing and more consistent processing over time. Compared to alternatives currently on the market, Somos® WaterShed Black prints a more true black color off the machine. The material offers a smooth surface finish and higher moisture and chemical resistance.
Somos® WaterShed® Black provides a solution to build rigid, tough parts, while eliminating the need for painting. With similar properties and processing as Somos® WaterShed® XC 11122, this multipurpose resin provides the same benefits in a black stereolithography material.
Somos® WaterShed® XC 11122 is the clear solution for designers looking for ABS and PBT-like properties for stereolithography technology. One of our most popular resins, Somos WaterShed XC 11122 produces highly detailed parts with superior clarity and water-resistance.
As one of the industry’s most popular materials, Somos® WaterShed® XC 11122 is the clear solution for numerous applications. Whether you’re a designer looking for highly detailed parts with superior clarity and water resistance or an engineer focusing on durability for functional testing, Somos® WaterShed XC 11122 mimics the look and feel of clear thermoplastics, such as ABS and PBT.
Somos® WaterShed® XC 11122 produces optically clear parts with a smooth finish, and it’s ease of use helps to shorten product development and testing. This versatility means Somos® WaterShed® XC 11122 is the ideal material in markets such as automotive, aerospace, and consumer electronics for applications including packaging, RTV patterns, durable concept models, wind tunnel testing, and investment casting patterns.
In motorsports – as in automotive, rail, and aerospace – speed is key. Getting ready for a race, from design to the track, you need to be the fastest. Printing your wind tunnel models with Somos® PerFORM Reflect saves more than 30% post-treatment. So, you can get your aerodynamic designs onto your vehicle faster – and be more competitive on the track, road, rail, or air.
In Formula One, a car body is typically printed at 60% of its normal size for simulation purposes and checked with particle imaging velocimetry (PIV) in critical areas. Somos® PerFORM Reflect is a new and unique stereolithography material developed specifically for 3D printing parts for wind tunnel testing with PIV. With this innovation, Stratasys again sets a standard in enabling faster aerodynamic design optimizations – in motorsports and beyond.
Somos® PerFORM Reflect produces strong, stiff, high-temperature resistant composite parts that are ideal for wind tunnel testing. Extensive tests show that the new Somos® PerFORM Reflect reduces post-processing by more than 30%, eliminating the need for additional PIV coatings. This translates into faster data collection, decreasing overall lead time per design iteration and allowing customers to conduct iterations faster.
Somos® PerFORM Reflect utilizes patented new technology that reduces and even eliminates much of the finishing work required with traditional materials. Based on Stratasys’ industry-standard Somos® PerFORM, Somos® PerFORM Reflect demonstrates all the performance attributes that customers rely on, such as low viscosity, low settling, fast processing, high stiffness, and heat resistance.
Pages
-
Item Number:273-906 -
Item Number:TFX-CRL-1Experience unparalleled realism with TacMed Solutions' Clinical Response Lower (CRL) trauma trainer. This high-fidelity, remote-controlled simulator provides authentic simulations for hemostatic wound training, tourniquet application, and more. Perfect for POI, Secondary Care, and Prolonged Field Care training. -
Item Number:TFX-CRU-R-1Experience unparalleled realism in medical training with the TacMed CRU-R, a high-fidelity trauma simulator offering lifelike features like active breathing, CPR, central line insertion, and remote-controlled operation. Discover its versatility and mix-and-match capability for comprehensive clinical simulations. -
Item Number:295-714DAC Worldwide’s Clip Valve Cutaway (295-714) is a sectioned industrial valve sample that allows for valuable classroom training in the operation, construction, and maintenance of industrial clip gate valves. -
Item Number:950-STCL1Amatrol’s Solar Thermal Troubleshooting – Closed-Loop Learning System (950-STCL1) trains students in solar system operation, programming, and troubleshooting with hands-on equipment and eLearning, covering both pressurized and drainback systems. -
Item Number:A02B-0158-B110#USFANUC's CNC education simulator is tailor-made for learning, providing cost-effective entry to the cutting-edge FANUC 0i-MODEL F Plus CNC platform. It comes in a compact, portable package that seamlessly fits into any classroom setting. Additionally, with the screen display function software, you can conveniently assume partial control of the simulator via a PC connected through Ethernet. -
Explore Lincoln Electric's Torchmate CNC plasma cutting tables for education, including the 4410, 4810, and 4510 models. Equip students with hands-on CAD/CAM skills using industry-leading tools and curriculum. -
The NEW CRX educational package presents a new take on robot training. It features a FANUC CRX-10iA collaborative robot and all the functions required to teach core programming skills. -
Item Number:T7200Amatrol’s T7200 Combined Refrigeration Installation Learning System teaches hands-on HVACR skills with real-world components and interactive multimedia. -
Item Number:T7400Amatrol’s T7400 Commercial Refrigeration Learning System teaches students to operate, maintain, and troubleshoot refrigeration systems with real-world components, smart controllers, and FaultPro fault-insertion software.
