MOD-WELD® ARC Mate robotic welding cells with fixed table, rotary table, H-frame, Ferris wheel, and headstock/tailstock options for advanced fabrication and training programs.
Simlog Mobile Crane Personal Simulator's Corridor Following 4 Module has trainees move the concrete bucket along the three-section, z-shaped corridor on the ground from one end to the other, keeping the bucket at a constant height directly above the corridor while controlling sway.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Mobile Crane Personal Simulator's Pick, Lift, and Place Module has trainees configure the boom angle, extension mode, and length and then place the hook in the rigging target (blue sphere) above the load. Once triggered, lift the load and place it into the target. Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Signaling Module has trainees move a load to a target destination hidden from the view of the crane operator, and so a signal person is required.
The signal person must view the lift using the dedicated signal-person display and provide hand or voice signals to the crane operator to safely move the load into the target (the target changes color as the load gets closer).
Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the crane operator activates the horn. Telescope extend/retract control is disabled for this module.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Off-Highway Truck Personal Simulator's Corridor Driving 1 Module has trainees drive the truck through the corridor to the target. Each trial ends when the truck is over the target and parked (gear in Park, or gear in Neutral with parking brake engaged).
Simlog Off-Highway Truck Personal Simulator's Complete Haul Cycle 2 Module has trainees drive the truck from the dumping zone to the wheel loader. After the truck is fully loaded by the loader, return the dumping zone, dump the load and drive away.
Simlog's Reach Lift Truck Personal Simulator: Slalom 1 Forward Driving - pick up the load, drive forward through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Slalom 2 - Pick up the load, drive in reverse through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks 2, Standard Aisles - Working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks, Narrow Aisles - working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog Mining Truck Personal Simulator - Corridor Driving Module: Trainees drive the truck through the corridor to the target. The trial ends when the truck is over the target and parked (gear in Park or Neutral with parking brake engaged).
Pages
-
-
DAC Worldwide’s models are detailed, to-scale models that depict various industrial machines across numerous sectors. The industrial models, which are loosely-based on common equipment by popular industry leaders, include all primary features and components. -
Item Number:400-000DAC Worldwide’s Modular Basic Electricity Training System (400-000) examines basic AC and DC electrical principles. Learners will explore how electricity is used for power and control in various sectors, including industrial, commercial, and residential applications. The system covers industry-relevant skills, such as installing, operating, and troubleshooting AC and DC electrical circuits in a variety of applications. -
Item Number:419-000DAC Worldwide’s Motor Load Option (419-000) is a component part of the DAC Worldwide Motor Fundamentals Training System (410-000) that adds a consistent, measured load to the 410-000’s system motors so that learners can study the operating characteristics of different motor types while under load. -
Item Number:212-000DAC Worldwide’s Motorized Multi-Turn Valve Actuator Trainer (212-000) is a multi-functional device used for hands-on multi-turn actuator training. -
Item Number:286Tech-Labs technical training solutions. -
Item Number:287DAC Worldwide’s Multi-Pass Floating Head Heat Exchanger Training Model (287) is a highly-detailed scale model of a multi-pass, floating head, heat exchanger, supporting training in the operation and maintenance of industrial heat exchangers. -
Item Number:275-160-PAC / 275-160G-PACDAC Worldwide’s Multi-Stage, Split Case Pump Dissectible 275-160-PAC is an industrial pump for hands-on training relating to process pumps. -
Build a future-ready STEM and CTE classroom with the NeuroMaker Hand 2.0 – a programmable prosthetic hand kit that teaches biotechnology, robotics, and coding through real-world, hands-on learning. -
The Industrial Technology Maintenance (ITM) certification features nine stackable credentials allowing students to find a job while completing each duty area.
