The Parallel-Shaft Helical Gear Reducer Dissectible is a sturdy unit mounted on a 7-gauge, formed-steel baseplate with provision for bench-top, workstation, or storage rack mounting.
CM Labs' Rubber-Tired Gantry (RTG) Crane Simulator—now fully compatible with the Remote Operating Station (ROS)—delivers an unmatched virtual training experience. Designed to mirror the equipment used in today’s leading terminals, this simulator empowers ports and training centers to build critical skills in a safer, more efficient, and more ergonomic environment.
- Ergonomic ROS setup mirrors real-life port terminal environments
- Realistic crane behavior with collision risk awareness
- Live load path graph for real-time operator feedback
- Progressive training exercises: beginner to certification-ready
- Integrates with CM Labs’ full port training ecosystem
Instructor Monitoring and Metrics
The RTG simulator is compatible with Intellia Instructor, enabling trainers to monitor operator performance, inject training challenges, and generate detailed KPI reports remotely. It’s scalable, flexible, and built for both in-person and remote training environments.
CM Labs’ Ship-to-Shore (STS) Crane Simulator features industry-leading cable physics that replicate the real behavior of crane cables under tension and slack. This simulation doesn’t just look realistic—it behaves like the real thing.
Operators learn how to react to cable cues naturally, developing critical instincts that improve safety and efficiency on the job. Rather than relying solely on digital readouts, trainees gain a sensory-based understanding of crane operation.
- Simulates accurate cable tension and slack
- Builds sensory recognition and crane-handling instinct
- Ideal for operator onboarding and STS certification training
- Supports immersive, experiential learning
Safer Training. Smarter Operators.
With true-to-life feedback, CM Labs’ STS Crane Simulator ensures your workforce is not only trained—but prepared. Operators graduate with a deeper understanding of their equipment and their responsibilities on the terminal floor.
The Mobile Harbor Crane Simulator from CM Labs delivers a training experience that captures the full complexity of real-world cable and container dynamics. Trainees learn to control side swing, in-and-out movement, and rotator behavior with precision and confidence.
This simulation doesn’t just build mechanical skills—it develops the judgment and control necessary to land containers safely and efficiently in varied conditions.
- Realistic sideward swing and pendulum dynamics
- Rotator control for container orientation
- In-and-out cable motion training
- Immersive feedback for building muscle memory
Build Confidence. Improve Accuracy.
Operators face container behavior that reacts as it would in live operations. From swing correction to exact placement, CM Labs’ simulation tools help prevent real-world mistakes before they happen.
CM Labs’ Ship-to-Shore (STS) Crane Simulator delivers unmatched realism in container alignment training. Featuring an accurate recreation of the twist-lock mechanism, this simulator teaches operators to place containers with exactness—not approximation.
Operators learn how to visually and physically confirm alignment, developing muscle memory and awareness that translates directly to the terminal floor. This builds long-term habits that reduce error and increase safety.
- Twist-lock mechanism realistically simulated
- Training for accurate container alignment—not estimates
- Prevents the development of “close enough” habits
- Builds safe, effective operator technique and precision
Better Training = Better Results
This kind of high-fidelity simulation ensures that new hires and experienced operators alike are ready to perform with confidence, precision, and accuracy—before ever stepping foot in the cab of a real crane.
CM Labs’ Mobile Harbor Crane Simulator offers a detailed and immersive experience for bulk material handling operations. From the way the grab interacts with loose materials to realistic dust clouds and deformation, this simulator helps operators understand the nuances of working with bulk cargo.
Operators learn to react appropriately to shifting loads, anticipate how materials will respond, and optimize performance based on realistic conditions. The simulator provides a safe, repeatable, and measurable training environment for high-risk material handling.
- Realistic bulk material movement and deformation
- Dynamic dust effects that replicate working conditions
- Accurate modeling of grab impact and control
- Trains fine motor skills and environmental awareness
Train for the Unexpected
Loose cargo is unpredictable—but training doesn’t have to be. With CM Labs, your team gains hands-on practice with the kind of complex, variable scenarios they’ll face every day on the job.
The Reach Stacker Simulator by CM Labs delivers a true-to-life training experience by simulating how load distribution, height, and positioning affect vehicle stability. Operators quickly learn how their actions impact the center of gravity and how to correct unsafe behaviors before they become accidents.
This hands-on simulation creates a strong foundation in safe operation, helping operators build good habits, anticipate instability, and avoid real-world consequences.
- Accurate modeling of load placement and center of gravity
- Real-time response to improper handling or overreach
- Teaches how to prevent tipping and equipment damage
- Essential for both new trainees and experienced operators
Learn the Physics Behind the Machine
With CM Labs simulation, your team doesn't just move cargo—they understand the "why" behind every safe move. That knowledge leads to more confident operators and safer port environments.
CM Labs delivers training solutions that go beyond generic environments. With our custom yard layout simulation, you can replicate the exact layout of your terminal—including traffic flows, container stacks, lane widths, and equipment paths.
This customized environment allows operators to train in a familiar setting, shortening the learning curve and reinforcing spatial awareness, while also improving long-term efficiency and safety.
- Match your terminal’s actual layout and flow
- Enhance operator familiarity and response time
- Customize training around site-specific challenges
- Support onboarding and advanced navigation training
Train in the Environment You Work In
Give your operators a head start by training them in a layout that mirrors your actual port. With CM Labs’ custom simulator environments, they’ll learn to navigate confidently—before they ever set foot on the terminal.
Lane layout plays a critical role in operator safety and efficiency. That’s why CM Labs allows you to customize simulator lane configurations to match your real-world worksite or port environment.
From narrow lanes to multi-equipment traffic paths, operators can train in lane layouts that reflect your actual site conditions—improving confidence, reducing incidents, and accelerating readiness.
- Simulate your actual cargo lanes and drive paths
- Practice maneuvering in site-specific layouts
- Increase operational efficiency and spatial awareness
- Support precision in high-traffic, high-risk areas
Real Layout. Real Practice. Real Results.
Training operators in realistic lane configurations gives them the experience they need to handle tight spaces, navigate staging zones, and coordinate with other equipment—all without ever leaving the simulator.
CM Labs’ simulation solutions can be configured with custom control integration, enabling your team to train with hardware that mimics your exact on-site equipment. From joysticks to switch panels, we tailor control interfaces for maximum familiarity and learning efficiency.
This realism minimizes the gap between simulation and real-world operation, making onboarding faster and reducing the chance of operator error during the transition to live machinery.
- Custom control boxes and layouts to match actual equipment
- Supports specialized control schemes and multi-function joysticks
- Accelerates onboarding by removing guesswork
- Improves operator confidence and performance
From Simulator to Real Equipment—Seamlessly
Don’t just simulate the environment—simulate the feel of the job. With CM Labs’ customizable controls, your team trains with the same hardware interfaces they’ll use on the floor, field, or dock.
CM Labs’ Intellia Overhead Crane Simulator Training Pack is engineered for industrial training environments, especially for steel producers and manufacturers. This simulator delivers immersive, hands-on experience with multiple attachments, control schemes, and realistic machine behavior to help operators build critical skills in a risk-free environment.
Operators will gain practical experience managing crane movement with precision, controlling pendulum swings, and handling diverse equipment such as the C-Hook, Coil Tong, and Hoist Slab Tong. The inclusion of interactive faults and open-ended scenarios enhances problem-solving abilities and prepares users for unexpected real-world challenges.
- Attachments: C-Hook, Coil Tong, Hoist Slab Tong
- Performance Metrics: Pendulum count, cycles per hour, overloads, anti-two-block alarms, collisions
- Learning Outcomes: Precision control, equipment interaction, efficient cycle development, safety awareness
- Simulator Compatibility: Edge Plus desktop, Edge Max motion-enabled, Advantage fully immersive series
- Control Options: Cobra joysticks, control lever box, pendant controls, remote belly box
Fully compatible with CM Labs’ suite of instructor tools and other Intellia Training Packs, the Overhead Crane Simulator is a critical addition to any comprehensive industrial training program.
Pages
-
Item Number:205-140 -
PatrolSim™ 8 is an advanced law enforcement driving simulator that delivers immersive, scenario-based training to improve officer decision-making, pursuit management, and emergency vehicle operations in a safe virtual environment. -
Learn about the PCB Engraver, a compact 3-axis CNC solution built for precision PCB manufacturing and educational training environments. -
With its appealing technical specifications, peel 3d is the most affordable professional-grade 3D scanner for reverse engineering. -
Item Number:273-940This DC permanent magnet motor cutaway supports industrial training activities related to electric motor types, as well as repair and troubleshooting. A fractional horsepower, industrial-duty motor is modified for training purposes. -
Item Number:417-000DAC Worldwide’s Permanent Magnet DC Motor Training System (417-000) provides a starting point for understanding a common, widely-used industrial induction motor. -
Item Number:411-000DAC Worldwide’s Permanent Split Capacitor Start (PSC) AC Motor Training System (411-000) is one in a comprehensive series of stand-alone, motor-related training aids that offers an introduction to a range of common motor types used in industry. This unique training aid introduces learners to the terminology, operating characteristics, wiring, and troubleshooting of PSC motors used in industry and commercially. -
Item Number:292-01Explore the LJ Create PETRA II Advanced Industrial Control Trainer — a complete factory automation and PLC training system for developing real-world skills in mechatronics, process control, and industrial maintenance. -
Item Number:295-901DAC's Phillips Cascade Process (LNG) System Model is a detailed and stylized scale model of a single train LNG production/conversion system, designed for training purposes. -
Item Number:428DAC Worldwide’s Piloting Switch Module (428) is a motor control-related device that compliments and expands the usefulness of related DAC Worldwide motor control training systems by incorporating alternate switch components and other devices into control circuitry as found in industrial systems.
