DAC Worldwide’s Induced Draft Cooling Tower Model (298) is a highly-detailed scale model of a common open circuit, induced draft, cooling tower, supporting training in the operation and maintenance of cooling towers, as found in utility systems within both industrial facilities and commercial installations.
The Electrical Relay Control Training System (90-EC1A) teaches how to interpret, design and operate relay control circuits using ladder diagrams. Electrical control is vital in the operation of electric and fluid power actuators and also forms the fundamental building block of automation systems like programmable logic controllers (PLCs), which are programmed using the electrical control schematic method, the ladder diagram.
The Electrical Relay Control Training System includes a tabletop console with pre-mounted electrical control, pneumatic, and electri power components. Each component's electrical terminals are connected to heavy-duty banana jacks, enabling learners to quickly connect and operate various automation control circuits.
The training system also features in-depth curriculum covering major topics including control logic, ladder diagrams, sequencing control, timers and advanced systems.
Amatrol’s Design of Structures 1 Learning System (94-DOS1) serves as an introduction to civil engineering and covers the design, construction, and analysis of structural designs, such as bridges, buildings, and tunnels. Design of structures introduces learners to the various roles that civil engineers can assume in the residential, transportation, and industrial fields. This system features world-class curriculum that intertwines theoretical lessons such as how to calculate the bending stress in beams with practical skills like building and testing a Warren Truss bridge.
The design of structures training system includes two bridge component sets that can be used to construct a variety of truss bridges, a beam component set to show how different loads affect beam stress, and a data acquisition system to test the stress on various components. These components will help learners to build skills that can be applied in the workplace, which is one example of how Amatrol transforms the global workforce one life at a time.
Concrete Beam Construction & Testing Training System
Amatrol’s Design of Structures 2 Learning System (94-DOS2) expands on 94-DOS1 concepts and covers topics like beam deflection, column buckling, concrete, building design, and construction. The 94-DOS2 introduces learners to theoretical principles such as how different types of loads affect a structure and then allows them build a scale model of a four story building frame and test how different stresses act on it. This marriage of theory and hands-on skills reinforce important structural design concepts and show learners how they apply to houses, office buildings, cathedrals, malls, and more.
Among many other components, the 94-DOS2 includes a concrete beam component set that allows learners to mix and set their own concrete beams, then test them for weaknesses. Providing components that allow learners to build and test structural elements while working through the world-class curriculum is one reason that Amatrol is the world’s leader in skills-based, interactive technical learning.
Amatrol's Design of Structures 3 (94-DOS3) covers the basic principles of surveying, surveying equipment, reading and interpreting maps, and global positioning systems. Surveying involves taking measurements of land and its features and then processing this information into usable data. Surveying provides essential information used by construction professionals, civil engineers and more!
The Design of Structures 3 Training System includes a level-transit kit, global positioning system, interactive multimedia surveying curriculum, an instructor's guide, an installation guide and a student reference guide. This equipment and curriculum will be utilitzed to cover vital topics like level-transit operation, trigonometric survey application, topographical maps, global positioning system applications, and more!
Robotics and Computer Programming
The Flexible Manufacturing Learning System 1 (94-FMS1A) adds to either the Robotics and Computer Programming 1 Learning System (94-RCP1) or the Robotics 2 Learning System (96-ROB2A) to teach advanced programming applications of robotic systems. Applications include linear motion, palletizing, barcode readers, digital gauging, CNC workcells, serial communications, multitasking, and interrupts. These capabilities are commonly found in the current generation of industrial robots.
The model 94-FMS1A provides real-world components students will use to create workcells that model industrial applications of advanced robotics. Students will develop flexible manufacturing robot programs, design and build interfaces, install automation components, and demonstrate the operation of live systems. Amatrol’s Flexible Manufacturing Learning System includes a digital gauging module, barcode reader module, servo traverse axis, FMS interface module, sensors, test components, student learning materials for theory and lab, and teacher’s assessment guide. The learning materials also support the use of an optional CNC machine module to demonstrate robot loading and unloading.
Injection, Blow, & Extrusion Molding Skills
Amatrol’s Plastics Technology Learning System (94-MP3T) is an all-in-one trainer that can perform injection molding, blow molding, and extrusion molding! With the ability to hold four ounces of plastics, the plastic injection molding training unit can perform multiple molding shots without learners needing to refill the system and wait for the plastic to melt. Additionally, this system features two digitally-controlled heater jackets located on the system’s barrel and nozzle to create dual temperature zones, which is a standard feature on industrial plastics machines.
Plastics are used in nearly every industrial area from automotive to food and beverage. Besides strong hand-on learning, the 94-MP3T features thorough theoretical knowledge that not only intricately explains the processes, operation, safety, and troubleshooting of the three major types of molding, but also offers curriculum in basic chemistry and then provides an in-depth look at polymers and the properties of plastics. The curriculum also covers safety data sheets (SDS) and plastics system purging.
Hands-On Testing & Polariscope Skills
Material strength properties affect the performance and safety of almost every product made. As technology has advanced, material choices have broadened and become more complex. Engineers and technicians alike must be able to select the proper material for an application and analyze material properties when a product fails. That calls for industrial materials testing.
Amatrol’s Materials Engineering 1 Learning System (94-MT1) uses industrial quality components to teach students how to evaluate and use different industry grade materials. The 94-MT1 allows students to conduct a wide array of tests including tensile testing on steel alloys. Students learn industry-relevant skills in materials testing (tensile, compression, hardness, and shear), computerized data acquisition, chemistry of metals, interpretation of industry-standard numeric identification systems of various types of metals (steel, aluminum, brass, and copper), material strength analysis, and product design.
Hose and Tube Fitting
Amatrol’s Pneumatic Fitting Construction Learning System (94-PFC-1) covers how to select the proper fittings required for connecting components and installing fittings to hoses and flexible tubing. Major topics covered by the Pneumatic Fittings training system include air supply connections, control air connections, and power air connections. The topics and pneumatic skills included in this system are required knowledge for any technician or engineer involved in the construction of pneumatic systems.
The Pneumatic Fittings training system includes a tabletop workstation with pre-mounted pneumatic components like a pneumatic cylinder, flow control valve, manifold, and directional control valve. Learners will use these and other components to practice skills like installing a rubber hose onto a push-on type fitting, connecting tubing using a ferrule type fitting, and installing a bulkhead fitting. Working with these industrial-grade components will help learners gain confidence and build real-world applicable skills for rewarding careers like industrial maintenance technicians.
Amatrol’s Geothermal Flush Cart Learning System (95-GEO3) teaches how to purge debris and air from the geothermal loop and then charge it with a glycol/water solution. Dirt and plastic pipe shavings can become trapped in geothermal systems during construction and must be purged to avoid damaging the system during operation. Proper procedures for filling and pressurizing the system must be followed to avoid aerating the fluid being used to charge the system or this entrained air will lower system performance.
Pages
-
Item Number:298 -
Item Number:273-905DAC Worldwide’s 2-Pole Circuit Breaker Cutaway (273-905) is a double pole, DIN rail-mounted, single-phase industrial breaker that has been carefully sectioned so that learners can see the internal configuration of the breaker. -
Item Number:T7500Amatrol's T7500 Refrigeration Learning System: Comprehensive training in VFD control, data acquisition, troubleshooting, and more, with a curriculum covering electrical components, system operation, controller programming, and airflow measurements. -
LJ Create's Industry 4.0 program is designed to give students a foundation in how Industry 4.0 and STEM concepts are applied in career pathways and then develop their knowledge and skills in specific industry sectors. -
Item Number:120-BPT | 120-CFCD | 120-CPT | 120-IPTInstrumentation and Process Control Training aids include a Basic Process Trainer, Flow and Level Control Trainer, and an Instrumentation Process Trainer. -
Provide operators with safe and effective training to reduce the likelihood of tipping and collisions with the Intellia Articulated Dump Truck Simulator Training Pack from CM Labs. -
Train backhoe operators with CM Labs’ advanced simulator—featuring the only solution that replicates backlash and instability for realistic, skill-focused learning in safe virtual environments. -
Train safer, smarter, and more efficiently with CM Labs’ Intellia Boom Truck Simulator Training Pack. Prepare operators for real-world certification using industry-approved exercises and engineering-grade simulation. -
Master excavation and grading techniques with CM Labs’ Bulldozer Simulator—featuring realistic 6-way blade control, innovative soil simulation, and immersive scenarios that build precision and efficiency. -
Provide Compact Track Loader Operators with essential training that helps reduce the likelihood of accidents due to tipping with the Intellia Compact Track Loader Simulator Training Pack from CM Labs.
