Made in North America, this professional-grade 3D scanner offers the perfect mix of unbeatable performance at a great price. Based on trusted and patented metrology-grade 3D scanning technology.
ASA (acrylonitrile styrene acrylate) FDM® filament is a broad-use commodity thermoplastic. It is similar to ABS (acrylonitrile butadiene styrene) but exhibits better UV resistance, mechanical properties, and aesthetics than ABS.
ASA suits most general-purpose 3D printing applications involving prototyping, jigs and fixtures, and low-volume production parts. ASA filament is available in the most colors of any FDM material.
Offering a variety of production-grade thermoplastics, FDM® technology creates parts that are highly accurate, tough, and suitable for both functional prototyping and end-use parts. ABS is the most common material used as it boasts good mechanical properties and high name recognition. Compared with ASA, ABS may be more familiar because of its popularity in mass production.
ASA is another popular all-purpose material for jigs and fixtures, manufacturing aids, prototyping and limited-run end-use parts. ASA matches or exceeds the mechanical properties of standard ABS and has greater heat resistance. Moreover, ASA demonstrates exceptional UV stability and, with its matte finish, offers the best aesthetics of any FDM thermoplastic. It’s especially suited for end-use parts in outdoor commercial and infrastructure applications, and its wide array of color options surpasses that of ABS.
FDM® TPU 92A is a thermoplastic polyurethane with a Shore A value of 92. The material exhibits high elongation, superior toughness, durability, and abrasion resistance.
FDM TPU 92A brings the benefits of elastomers to FDM 3D printing and can quickly produce large and complex elastomer parts. Typical applications include flexible hoses, tubes, air ducts, seals, protective covers, and vibration dampeners.
FDM TPU 92A is available on the F123™ Series 3D Printers and is compatible with QSR™ soluble support material.
Produce Large and Complex Elastomer Parts
Create accurate elastomer parts quickly and efficiently with the ease and reliability of professional FDM 3D printing. The durable elasticity of FDM TPU 92A material makes it a good choice for a variety of applications, including flexible hoses, tubes, air ducts and vibration dampeners.
FDM® HIPS (high-impact polystyrene) is a low-cost, general-use 3D printing thermoplastic. It offers similarities to ABS but has high impact resistance making it suitable for printing lower-requirement jigs, fixtures, and prototypes at a reduced cost.
Kimya PC-FR is a polycarbonate FDM® 3D printing filament with flame-retardant properties developed specifically for additive manufacturing. It retains the beneficial characteristics of standard polycarbonate, such as dimensional stability, high glass transition temperature, and high impact resistance.
Kimya PC-FR is a polycarbonate (PC) based material with flame-retardant properties developed specifically for additive manufacturing. It retains the beneficial characteristics of standard polycarbonate such as dimensional stability, high glass transition temperature, and high impact resistance.
Key Attributes
- Flame-resistant material
- Electrical insulator
- Good dimensional stability
- Meets or exceeds the mechanical performance of Stratasys PC material
- Compatible with soluble support
- Meets EN 45545-2 and NFPA 130 standards
- Slice heights: 10
Nylon 12 is a semi-crystalline, FDM® thermoplastic. As with other semi-crystalline materials used in traditional manufacturing processes, special considerations should be implemented to ensure an optimal part is obtained. The information in this document illustrates the following considerations:
- Tip Selection
- Build Modes
- Porosity
- Sacrificial Tower Features
- Build Sheets
- Support Removal
- Annealing
FDM® Nylon 12 filament is the 3D printing equivalent of standard industrial PA12 (polyamide 12) material. A strong engineering thermoplastic that exhibits toughness and high impact strength without being brittle. Its excellent fatigue properties make it a good option for repetitive-flex applications such as snap-fit clips, closures, and press-fit inserts.
Other applications include jigs, fixtures, low-volume production parts, and accurate prototyping of nylon 12 high-volume injection molded parts. FDM Nylon 12 is available in black.
FDM® Nylon-CF10 is a composite material combining a blended nylon polymer with 10% chopped carbon fiber (by weight), enhancing the material’s strength and rigidity. The nylon base polymer also gives FDM Nylon-CF10 good chemical resistance.
Pages
-
-
Item Number:HRVThe simulation software puts you at the controls of a typical tracked carrier (swing machine) equipped with an articulated boom and free-swinging "dangle-type" harvester head. You can even change the viewpoint during the simulation at the touch of a button. Simply set up the simulator controls, install the simulation software on your desktop or laptop PC, and begin! -
Item Number:238-000DAC Worldwide’s Heat Exchanger Maintenance Training System (238-000) consists of a full-size shell and tube industrial heat exchanger. This flanged, fixed tube, bundle-type heat exchanger represents one of the most common types of heat exchangers learners will encounter on the job. -
Item Number:607DDAC Worldwide’s Heat Exchanger Process Control Trainer (607D) is a full-sized, working fluid system that allows for hands-on training in measurement and control as it relates to temperature in an industrial fluid process system. -
Item Number:373-505This Heat Pump Reversing Valve Cutaway provides a full cutaway view of the reversing valve that exposes the complete internal components and operating principles. -
Training aids for heat transfer skills include industrial components like a U-Tube Heat Exchanger, Vertical Thermosyphon Reboiler, Multi-Port Plate Exchanger, Multi-Pass Floating Head, Fixed Tube Sheet Single Pass, and more -
Item Number:TFX-C-HCSTThe TacMed Simulation Hemorrhage Control Skills Trainer - Classroom (HCST-C) is a medical intervention simulator designed to teach fundamental skills for tourniquet application and hemostatic wound packing. -
Item Number:373-110DAC Worldwide’s Hermetic Compressor Cutaway (373-110) is an expertly-sectioned example of a common fractional-horsepower refrigeration compressor, which facilitates and supports practical training in compressor design, operating principles, and maintenance. -
Item Number:373-160DAC Worldwide’s Hermetic Rotary Compressor Cutaway is an expertly-sectioned example of a common fractional horsepower rotary-type refrigeration compressor. The industrial learning device facilitates and supports practical training in AC compressor design, operating principles, and maintenance. -
Item Number:373-130This Hermetic Scroll Refrigeration Compressor Cutaway provides a full cutaway view of the compressor body that exposes the complete internal components, and operating principles. Economically mounted on a formed-steel and powder-coated baseplate assembly, the product can be mounted on a variety of related optional display, storage, and workstation products.
