DAC Worldwide’s Rotary Drilling Bit Replica Set, 9-Piece (295-405) is an assortment of rotary drilling bit replicas that teaches learners about the primary drill bit technology used on today's oil & gas rotary drilling rigs.
The Backfilling 1 module of Simlog’s Bulldozer Personal Simulator introduces trainees to essential earthmoving tasks in a controlled, virtual setting. Operators learn how to manage blade position, material flow, and movement control to efficiently backfill trenches and depressions—skills critical on real-world construction sites.
This video demonstrates how the simulator reinforces key techniques like forward pushing, blade leveling, and maintaining smooth, consistent backfill layers. With a focus on safety, precision, and production efficiency, this module helps new operators gain confidence while reducing risk and training costs.
Simlog Mobile Crane Personal Simulator's Pole Topping Module has trainees lifting a rubber tire load onto the tops of a series of poles in order. The target pole is marked with blue rings that will turn green once the pole has been topped.
Simlog Mobile Crane Personal Simulator's Pole Placement Module has trainees carefully lift the pole off the ground and then place it into the target hole (the target changes color as the pole gets closer) while avoiding obstacles and unstable positions.
Simlog Mobile Crane Personal Simulator's Corridor Following 4 Module has trainees move the concrete bucket along the three-section, z-shaped corridor on the ground from one end to the other, keeping the bucket at a constant height directly above the corridor while controlling sway.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Mobile Crane Personal Simulator's Pick, Lift, and Place Module has trainees configure the boom angle, extension mode, and length and then place the hook in the rigging target (blue sphere) above the load. Once triggered, lift the load and place it into the target. Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Signaling Module has trainees move a load to a target destination hidden from the view of the crane operator, and so a signal person is required.
The signal person must view the lift using the dedicated signal-person display and provide hand or voice signals to the crane operator to safely move the load into the target (the target changes color as the load gets closer).
Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the crane operator activates the horn. Telescope extend/retract control is disabled for this module.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Off-Highway Truck Personal Simulator's Corridor Driving 1 Module has trainees drive the truck through the corridor to the target. Each trial ends when the truck is over the target and parked (gear in Park, or gear in Neutral with parking brake engaged).
Simlog Off-Highway Truck Personal Simulator's Complete Haul Cycle 2 Module has trainees drive the truck from the dumping zone to the wheel loader. After the truck is fully loaded by the loader, return the dumping zone, dump the load and drive away.
Simlog's Reach Lift Truck Personal Simulator: Slalom 1 Forward Driving - pick up the load, drive forward through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Slalom 2 - Pick up the load, drive in reverse through the slalom course, and place the load on the floor at the target position defined by a red outline.
Pages
-
Item Number:295-405 -
Item Number:241-000DAC Worldwide’s Rotary Kiln Maintenance Training System (241-000) is a heavy-duty, steel benchtop training device that allows for realistic training in maintenance activities associated with large rotary kilns. -
Item Number:211-192DAC Worldwide's Rotary Screw Compressor Cutaway (211-192) is a realistic, sectioned rotary screw compressor commonly found in manufacturing plants and other industrial applications. This device includes a 7-gauge formed-steel mounting baseplate, allowing for stand-alone use, bench-top mounting, or mounting on specialized DAC mounting workstations. -
Equip your lab with the Router 2600 or 2600 Pro, versatile CNC routers that deliver large-capacity cutting for technical education and prototyping. -
Expand CNC training capabilities with the Router 6600 and 6600 Pro, large-format routers designed for precision education and industrial-level projects. -
SACA's Micro-Credentials can be attained to prove efficiency in specific applications or combined to attain a full SACA Specialist Certification. The Smart Automation Certification Alliance (SACA) is a non-profit organization supported by industry partners and educators. -
DAC Worldwide’s sample boards offer valuable maintenance training in the identification and selection of a variety of industrial components. Each sample board features a selection of industrial-quality components mounted on either a panel or a station that features nameplates for easy association with individual components.
-
Item Number:278-180SSDAC Worldwide’s Sanitary Air-Operated Diaphragm Pump Cutaway, Stainless (278-180SS) depicts a sectioned industrial air-operated, double-diaphragm pump (AODD) cutaway that supports realistic classroom training in the operation, construction, and maintenance of this common process pump used in many industries. -
Item Number:273-410SSDAC’s Sanitary Diaphragm Valve Cutaway, Stainless (273-410SS) is a specialized, sectioned valve and actuator assembly that unveils the complete working mechanism of a representative diaphragm-actuated, stainless steel control valve used in sanitary service. -
SanitationSim™ Series 8 waste disposal driving simulator delivers safe, scenario-based training for sanitation and recycling drivers—improving safety, efficiency, and fleet performance.
