The AD 2000 iQ’s technology delivers superior and measurable performance, ensuring airflow and filtration is maintained even when particulates start to build up. It’s thanks to the vacuum/pressure which is three times greater than that of its predecessor, the AD 2000.
Tabletop Mechatronics Option
Add Amatrol’s Stepper Motor Programming Package (45058) to the Smart Factory Tabletop Mechatronics System to teach valuable motor programming skills.
Amatrol’s Smart Factory Tabletop Mechatronics System provides a fantastic introduction to Industry 4.0 training for high schools. When training space or budget limitations don’t allow for installation of a full Mechatronics line, the Smart Factory Tabletop Mechatronics System packs a wide variety of essential training topics and hands-on skills into an affordable, compact training system.
Amatrol’s Combined Refrigeration Installation Learning System (T7200) offers a comprehensive hands-on workstation and interactive multimedia curriculum to teach installation of electrical and mechanical refrigeration/air conditioning components in residential or light commercial applications. This system in an ideal training tool for future HVACR technicians.
The Combined Refrigeration Installation Learning System includes evaporator and condenser coils, a hermetically-sealed compressor, a filter/drier, and many more real-world industrial components that allows learners to practice skills with components that they’ll find on-the-job. The included multimedia curriculum covers topics like: copper tubing, refrigerant line routing and bending, flaring and swaging copper tubing, brazing and soldering refrigerant lines, and copper tubing insulation.
Amatrol’s Residential Mini-Split Heat Pump Learning System (T7130) teaches the critical hands-on skills HVACR technicians need to succeed when working with residential ductless (“mini-split”) HVAC systems. Learners will work with real equipment, such as: a heat pump condenser, evaporator unit, thermostat, panel-mounted gauges, and condensate pump.
In addition to developing hands-on skills with real equipment, learners will use Amatrol’s interactive multimedia eLearning curriculum to cover a wide variety of fundamental residential mini-split system topics, including: remote controller adjustments, heating and cooling modes, LED indicators, communication between units, and system troubleshooting.
WSU Enhances AM Learning with Stratasys F370®CR Composite 3D Printer
About Weber State University
The Advanced Research and Solutions Center at Weber State University is an innovation and collaboration area for local industry, primarily in the aerospace, defense, and advanced materials sectors. In addition, the center provides access to R&D resources that include additive manufacturing while offering educational and practical opportunities for students.
The Challenge
Providing students and local industry with the best opportunities for success requires access to current and emerging technologies, including additive manufacturing. However, existing WSU additive capabilities relied on older 3D printers, which were slow and costly to operate, with few material options. This situation limited WSU's Advanced Research and Solution Center's ability to meet student and local industry needs.
The Solution: Composite 3D Printing
To strengthen its 3D printing capabilities, the university added a Stratasys F370®CR composite 3D printer to complement its manufacturing and fabrication equipment.
The F370CR operates with two composite materials and several other engineering-grade thermoplastics. The composite 3D printing materials include FDM® Nylon-CF10 and ABS-CF10, which incorporate 10% chopped carbon fiber for added strength and rigidity.
Composite 3D Printing at Weber State University
Adding the F370CR printer gives WSU the capabilities of a current-technology 3D printer with more material options, including advanced composite polymers. The F370CR 3D printer’s ease of use and consistent printing performance gives users a faster, more reliable means of developing 3D printed solutions.
Ultimately helping WSU achieve the facility’s goal of providing innovative and leading-edge tools for its current and future students and customers.
Read the Complete Use Case!
Download the case study and discover how WSU accelerated its 3D printing capabilities with the Stratasys F370®CR composite printer, providing students with a reliable and efficient solution for their projects.
A single system for comprehensive technical training.
Gaining knowledge and practical skills in increasingly complex technical systems in ever shorter time cycles is the major challenge for present-day and future technical training. This challenge can be addressed with the UniTrain system, a computer-aided, multimedia system for experimentation and training in electrical engineering and electronics.
UniTrain offers a combination of more than 130 learning programs with associated experimentation hardware, allowing all areas of electrical engineering to be explored.
Your benefits
- One system – many applications
- For the classroom, laboratory, workplace, and recreation
- For independent studies, laboratory internships, and teaching
- Stand-alone, in a network, or as part of a learning management system (LMS)
Bryan High School is located in Bellevue, Nebraska, a city 8 miles south of Omaha, and it is part of the Omaha Public Schools (OPS) school district. The school serves grades 9 to 12 and has built its curriculum around sixteen career clusters intended to prepare students to complete high school, begin work on a post-secondary degree, or enter the workforce. Bryan High School has a population of just over 2,000 students and 120 staff members.
The Transportation, Distribution, and Logistics (TDL) Academy is a four-year program of study within Bry-an High School for students interested in careers in transportation, distribution, or supply-chain management. The program uses a “Pocket Academy” approach, integrating technical instruction with academic content. Teachers from other subject areas work with the Academy instructors to incorporate curriculum and concepts into core academic subjects.
To give students the real-world experience needed to meet new career-ready requirements, Bryan High School partnered with First Book, a non-profit book bank providing books to needy children. Bryan High School is one of sixteen secondary school distribution centers for First Book. One of the objectives of this partnership is to provide TDL students with industry-recognized OSHA (Occupational Safety and Health Administration) and forklift operator certifications.
Simlog’s new Backhoe Loader Personal Simulator puts you at the controls of a backhoe loader at work in a typical construction site. Both SAE and ISO joystick patterns are available, and changing the point of view during the simulation is easy with joystick buttons, keyboard function keys, and mouse controls.
Nine Simulation Modules of increasing level of difficulty begin by teaching basic skills and coordination in early exercises such as “Bucket Positioning” and “Stockpiling”. Later Simulation Modules culminate skills training with exercises such as exposing buried utilities with the backhoe bucket on "Buried Utilities - Perpendicular Excavation."
Key Benefits of the Operator Chair:
- Fully assembled with USB controls
- Steel platform on casters
- Adjustable seat, steering, and arm consoles
- Multi-purpose configurations
Simlog Replica Controls for the Backhoe Loader Personal Simulator features industrial strength components suitable for both table-top mounting and Simlog’s Operator Chair. If you are a Simlog customer, you may be able to re-use the Replica Controls that you already have.
Replica Controls begin with two industrial USB joysticks. There are a total of 8 push-buttons for the thumb, plus a trigger, to let you change the viewpoint by looking to the left/right, looking up/down, and by changing the viewing mode during the simulation. The USB electronics are built right into the base, so the joystick can be connected directly to your PC. Simlog also offers table-top mounting brackets to bring the joysticks down from table-top height to the sides of an ordinary chair to mimic better the positioning of real controls in the cabin of real heavy equipment.
To complete the Replica Controls, add the Logitech “G920 Driving Force Racing Wheel” consisting of a steering wheel, a three-pedal unit, and the Transmission Control Lever suitable for many other Personal Simulators. (The Logitech “Driving Force Shifter” can also be used.)
Simlog’s new Backhoe Loader Personal Simulator puts you at the controls of a backhoe loader at work in a typical construction site. Both SAE and ISO joystick patterns are available, and changing the point of view during the simulation is easy with joystick buttons, keyboard function keys and mouse controls.
Nine Simulation Modules of increasing level of difficulty begin by teaching basic skills and coordination in early exercises such as “Bucket Positioning” and “Stockpiling”. Later Simulation Modules culminate skills training with exercises such as exposing buried utilities with the backhoe bucket on "Buried Utilities - Perpendicular Excavation."
Simlog’s new Backhoe Loader Personal Simulator puts you at the controls of a backhoe loader at work in a typical construction site. Both SAE and ISO joystick patterns are available, and changing the point of view during the simulation is easy with joystick buttons, keyboard function keys, and mouse controls.
Nine Simulation Modules of increasing level of difficulty begin by teaching basic skills and coordination in early exercises such as “Bucket Positioning” and “Stockpiling”. Later Simulation Modules culminate skills training with exercises such as exposing buried utilities with the backhoe bucket on "Buried Utilities - Perpendicular Excavation."
Pages
-
-
Low airflow entry-level laser fume extractor incorporating DeepPleat pre filter technology and large combined filter.
BOFA’s Advantage 250 fume extraction and filtration system has been designed to provide a cost-effective solution for light duty applications. This compact and extremely quiet system is ideal for use in schools, sign making workshops, small-scale industrial environments and light laser coding applications.
-
The Advantage Base C180 has been designed specifically for the GCC C180 laser engraver. The dimensions of the unit allow the C180 to fit perfectly onto the extractor, effectively doubling it up as a workstation. The unit is also offered with an onboard air compressor to provide the laser with its air assist requirements and comes complete with extraction hose kit and compressor link up on compressor models.
-
The compact system designed for small-scale industrial sites and light laser coding applications.
The AD Nano+ fume extraction and filtration system has been designed as a cost-effective solution for light to medium duty applications and is the ideal choice for installations where floor space is limited.
-
The AD Oracle iQ is our most technically advanced laser fume extractor, combining a powerful range of unique features into one compact unit.
This versatile unit can be used across a range of laser applications and the revolutionary auto-voltage sensing blower automatically self-adjusts to run on any voltage worldwide.
Our inline AD Cyclone has been designed to separate lower particle sizes during laser marking process.
-
Introducing BOFA’s most technically advanced compact laser fume extractor. The AD Oracle SA iQ has been enhanced with BOFA’s iQ Operating System, RFA and ACF technology and packs a powerful range of unique features into one compact unit. -
The AD PVC iQ extraction system has been designed to effectively deal with the corrosive nature of the fumes generated when lasering PVC materials.
The latest design specification now offers many of the features associated with our “Best in class” AD Oracle iQ model as standard but in addition all internally exposed surfaces have been coated to resist the corrosive nature of the fume and each unit is fitted with HCL and VOC sensors which continually monitor the exhaust air of the unit giving added safety assurance.
-
Item Number:295-711ADAC Worldwide’s Adjustable Oil Field Choke Valve Cutaway (295-711A) is a sectioned, specialty valve sample that supports training in the design features, internal components, and maintenance of adjustable choke valves used in oil and gas production operations. -
Item Number:AM-CERTThe AM-CERT cell was specifically designed for Advanced Manufacturing training. Learn robot to PLC interface, PLC ladder logic, operator interface, safety, mechatronics, and iRVision all in one cell. Certified for Material Handling, Level II and III Training. -
Item Number:203E-PACIndustrial maintenance technicians must learn to operate, maintain, troubleshoot, and repair a wide variety of mechanical systems used to manufacture products. One of the key diagnostic tools technicians will use during preventive maintenance as well as to maintain optimum efficiency is vibration analysis.
