Simlog Mining Truck Personal Simulator - Complete Haul Cycle 1 Module: Trainees drive the truck from the dumping zone to the rope shovel and position the truck under the dipper (the shovel's horn will sound when the truck is appropriately positioned).

After the truck has been fully loaded (the shovel's horn will sound when the loading is complete), return to the dumping zone, dump the load and drive away.

Simlog Electric Rope Shovel - Following Grade Module: make the rightmost dipper tooth follow the line (the cursor changes color as the tooth moves away from the line). The trial ends when the tooth reaches the end of the line, and the operator activates the horn.

Simlog Electric Rope Shovel - Single-Pass Digging Module: Fill the dipper by digging at the rock face. The trial ends when there is material in the dipper, the dipper is no longer in contact with the rock face, and the operator activates the horn.

  • Simlog Personal Simulators - Bulldozer

Simlog’s Bulldozer Personal Simulator puts students behind the controls of a medium-sized Bulldozer as they experience the reality of a typical construction site. The virtual work site features dynamic terrain with life-like dirt pushing and spreading.

Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.

  • Simlog Mobile Crane Personal Simulator

Simlog's Mobile Crane Personal Simulator (Advanced Edition) puts trainees at the controls of a modern rough-terrain mobile crane equipped with a telescoping boom with deflection, a jib, and a realistic dashboard. The virtual worksite is set in a construction environment with various loads and hook blocks for training.

Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations. Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.

The Simlog Mobile Crane Personal Simulator offers a powerful, immersive way to train crane operators safely and affordably. Designed to replicate real-world lifting scenarios, the simulator focuses on essential skills such as boom control, hook alignment, swing coordination, and load management—without putting people or equipment at risk.

This virtual training solution helps reduce costly on-site errors while reinforcing best practices for jobsite safety and crane operation. Whether for workforce development or vocational education, Simlog’s crane simulator provides scalable, repeatable training that prepares operators for the real thing.

  • Simlog Tower Crane Personal Simulator Brochure

Simlog's Tower Crane Personal Simulator puts trainees at the controls of a modern freestanding top-slewing tower crane with a trolley jib. The virtual worksite is set in a typical construction environment and features terrain with various loads and hook blocks for training.

Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.

  • Off-Highway Truck Personal Simulator

Simlog’s Off-Highway Truck Personal Simulator puts students at the controls of a modern, sophisticated off-highway truck with lifelike driving dynamics in interaction with a built-in Wheel Loader. The virtual mine site features challenging driving scenarios and interactive dumping and loading zones.

Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.

  • Electric Rope Shovel Personal Simulator

Simlog's Electric Rope Shovel Personal Simulator puts trainees at the controls of a realistic Electric Rope Shovel at work in a typical mine site, with a built-in interactive Mining Truck.

Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.

Pages

  • Career and Technical Education student practicing low-voltage breaker operation in VR simulation
    Interactive VR training for low-voltage air circuit breaker operation, racking procedures, and safety protocols—designed to strengthen electrical reliability and workforce readiness.
  • Simlog Personal Simulators for OperatorTraining
    Item Number:
    OHT
    The simulation software puts you at the controls of a modern "rock truck" at work in a typical quarry, in interaction with a simulated Wheel Loader. You can even use the keyboard function keys and mouse controls during the simulation to change the point of view!
  • Mechanical Drives Cutaway Trainers
    Item Number:
    205-250
    DAC Worldwide’s Offset In-Line Helical Gear Reducer Cutaway (205-250) is one of an extensive series of actual industrial gear reducer cutaways for use in hands-on mechanical drives training in either the classroom or the laboratory.
  • DAC Model 205-150
    Item Number:
    205-150
    The dissectible features a carefully restored, sectioned, industrial offset in-line helical gear reducer to provide learners with a realistic training experience.
  • DAC Model: 295-721
    Item Number:
    295-721
    DAC Worldwide's Oil Field Pressure Gauge Cutaway (295-721) features a gauge used widely within industrial liquid and gas processes to monitor and document system pressures.
  • DAC Model: 295-709
    Item Number:
    295-709
    DAC Worldwide's Oil Field Relief Valve Cutaway (295-709) is for classroom training in the operation, construction, and maintenance of an industrial relief valve, used for gas service.
  • DAC Model: 295-707
    Item Number:
    295-707
    DAC Worldwide's Oil Patch Swing Check Valve Cutaway (295-707) is a sectioned valve sample used for training in the operation, construction, and maintenance of industrial oil patch-type check valves.
  • DAC Model: 295-715
    Item Number:
    295-715
    DAC Worldwide’s Oilfield Backpressure Regulator Cutaway (295-715) is a sectioned industrial regulator that allows for valuable and convenient classroom training in the operation, construction, and maintenance of an industrial backpressure regulator.
  • Oilfield Production Regulator Cutaway (Big Joe)
    Item Number:
    295-704
    DAC Worldwide's Oilfield Production Regulator Cutaway (Big Joe) (295-704) is a sectioned direct-operating industrial regulator that allows for valuable and convenient classroom training in the operation, construction, and maintenance of an industrial direct-acting regulator.
  • OnRobot Collaborative Robot Accessories
    The OnRobot Eyes makes it easy and affordable to deploy vision for almost any collaborative application. Eyes is ideal for sorting a variety of objects, CNC machine tending with metal parts that are defined by outer shape, and many other pick-and-place applications where orientation is important.

Pages