DAC Worldwide's Treater Dump Valve Cutaway (295-723) is a sectioned industrial specialty oilfield valve for training in the operation, construction, and maintenance of on-off type dump valves.
Antero™ 840CN03 is a PEKK-based FDM thermoplastic combining the excellent physical and mechanical qualities of PEKK with electrostatic dissipative (ESD) properties. The material is filled 3% by weight with carbon nanotubes.
As a high-performance polymer, Antero 840CN03 exhibits exceptional chemical and wear resistance, ultra-low outgassing properties and consistent ESD performance. ESD values range from 104 – 109 ohms per square inch. This makes the material particularly suitable for space and industrial applications where these qualities are critical.
Antero™ 840CN03 is a high-performance PEKK-based FDM® thermoplastic with strong mechanical properties and exceptional material properties, such as electro-static dissipation, temperature resistance, chemical resistance, exceptional wear properties, and ultra-low outgassing. This makes it ideal for low-volume, highly-customized production parts and functional prototypes that must withstand more intemperate conditions. Antero 840CN03’s primary advantages over other Stratasys high-performance materials – such as ULTEM™ 9085 resin, ULTEM™ 1010 resin, and PPSF – are its ESD, high chemical resistance, and low outgassing properties.
System Overview and Compatibility
Antero 840CN03 is available on the Stratasys F900™ and Fortus 450mc™ with a 0.010 inch (0.254 mm) slice height. It uses SUP8000B™ as a breakaway support system, similar to other Stratasys high-temperature material offerings. This support material is easier to remove than the other breakaway support systems. Antero 840CN03 requires the hardened head upgrade and utilizes a custom T20F tip for the model material. Both systems use a standard T16 tip for the support material.
Antero 840CN03 and SUP8000B are available in standard 92.3 cubic inch Fortus Plus™ canisters only, and the material will use the existing high-temperature material build sheets.
Antero™ 800NA is a PEKK-based FDM® thermoplastic. It combines FDM’s design freedom and ease of use with the excellent strength, toughness, and wear-resistant properties of PEKK material.
Antero 800NA exhibits high heat resistance, chemical resistance, low outgassing, and dimensional stability, particularly in large parts.
Appropriate applications include aircraft components exposed to jet fuel, oil, and hydraulic fluid, spacecraft parts that demand low outgassing, and chemical-resistant industrial parts. Using Antero 800NA with FDM technology avoids the waste associated with subtractive manufacturing of high-cost bulk PEKK material.
Antero 800NA is available on Fortus 450mc™ and F900™ 3D Printers and is compatible with breakaway support material SUP8000B™.
ASA (acrylonitrile styrene acrylate) FDM® filament is a broad-use commodity thermoplastic. It is similar to ABS (acrylonitrile butadiene styrene) but exhibits better UV resistance, mechanical properties, and aesthetics than ABS.
ASA suits most general-purpose 3D printing applications involving prototyping, jigs and fixtures, and low-volume production parts. ASA filament is available in the most colors of any FDM material.
Offering a variety of production-grade thermoplastics, FDM® technology creates parts that are highly accurate, tough, and suitable for both functional prototyping and end-use parts. ABS is the most common material used as it boasts good mechanical properties and high name recognition. Compared with ASA, ABS may be more familiar because of its popularity in mass production.
ASA is another popular all-purpose material for jigs and fixtures, manufacturing aids, prototyping and limited-run end-use parts. ASA matches or exceeds the mechanical properties of standard ABS and has greater heat resistance. Moreover, ASA demonstrates exceptional UV stability and, with its matte finish, offers the best aesthetics of any FDM thermoplastic. It’s especially suited for end-use parts in outdoor commercial and infrastructure applications, and its wide array of color options surpasses that of ABS.
FDM® TPU 92A is a thermoplastic polyurethane with a Shore A value of 92. The material exhibits high elongation, superior toughness, durability, and abrasion resistance.
FDM TPU 92A brings the benefits of elastomers to FDM 3D printing and can quickly produce large and complex elastomer parts. Typical applications include flexible hoses, tubes, air ducts, seals, protective covers, and vibration dampeners.
FDM TPU 92A is available on the F123™ Series 3D Printers and is compatible with QSR™ soluble support material.
Produce Large and Complex Elastomer Parts
Create accurate elastomer parts quickly and efficiently with the ease and reliability of professional FDM 3D printing. The durable elasticity of FDM TPU 92A material makes it a good choice for a variety of applications, including flexible hoses, tubes, air ducts and vibration dampeners.
FDM® HIPS (high-impact polystyrene) is a low-cost, general-use 3D printing thermoplastic. It offers similarities to ABS but has high impact resistance making it suitable for printing lower-requirement jigs, fixtures, and prototypes at a reduced cost.
Kimya PC-FR is a polycarbonate FDM® 3D printing filament with flame-retardant properties developed specifically for additive manufacturing. It retains the beneficial characteristics of standard polycarbonate, such as dimensional stability, high glass transition temperature, and high impact resistance.
Kimya PC-FR is a polycarbonate (PC) based material with flame-retardant properties developed specifically for additive manufacturing. It retains the beneficial characteristics of standard polycarbonate such as dimensional stability, high glass transition temperature, and high impact resistance.
Key Attributes
- Flame-resistant material
- Electrical insulator
- Good dimensional stability
- Meets or exceeds the mechanical performance of Stratasys PC material
- Compatible with soluble support
- Meets EN 45545-2 and NFPA 130 standards
- Slice heights: 10
Pages
-
Item Number:295-723 -
The primary goal of this course is to teach workers safe procedures for working in and around a trench environment on a construction site. Hard Hat VR's Trenching and Excavation Simulation is ideal for future employees or supervisors who will work in or around trenches on construction sites. -
Item Number:CO3221-7DTo prepare students for electrification of the powertrain in commercial vehicles, the renowned HV training system for passenger cars from Lucas-Nülle has been modified and adapted. The special learning concept of the training system, which combines theoretical and practical content in a target group-oriented manner, enables flexible on-site implementation that is taking regional, operational, and industry-specific features into account. -
Item Number:CO3221-7FThis training system from the TruckTrain series focuses on the topic of "Smart Farming 4.0" based on the ISO bus. Special attention is paid to the function of "Precision Farming with Section Control", which is implemented in the hardware in a practical and interactive way. -
Item Number:950-TEH1Train wind turbine technicians with Amatrol’s Turbine Electric Hub Troubleshooting Learning System (950-TEH1), featuring real-world component-level diagnostics, pitch control, and electronic fault insertion. -
A compact 2-axis CNC Lathe with totally enclosed high-visibility interlocking guard, suitable for all levels of education and training. Programmable spindle speeds and feedrates make the Turn 270 PRO ideal for cutting a range of resistant materials such as wax, plastic, acrylic, free cutting alloys, aluminum and steel. -
Learn about the Turn 370 Pro CNC Lathe, a high-capacity 2-axis machine perfect for educational and training programs requiring precision and durability. -
Item Number:285DAC Worldwide’s U-Tube Heat Exchanger Training Model (285) depicts a highly-detailed scale model of a common u-tube heat exchanger in a technically-accurate, professionally-crafted design. Based on a common make and model of a heat exchanger that reflects design standards established by the Tubular Exchanger Manufacturers Association (TEMA) and the ASME. -
Item Number:CPK-UAM2-001Explore the MINDS-i Commercial Drones Competition Kit for hands-on UAV building, programming, tuning, and competition-based STEM learning. Designed for 2–3 students. -
Item Number:MCK-DRGY-001The MINDS-i Drone Gimbal Rig gives you the ability to pilot the MINDS-i UAV in a safe and controlled environment. The preassembled rig allows you to introduce flight controls and best practices to anyone, regardless of skill level or age. With the Gimbal Rig’s 3-Axis system, you have the full-motion capabilities of the UAV at your fingertips. The MINDS-i Gimbal Rig is an excellent fit in a classroom, trade show, or convention.
