Train operators on vehicle handling and trailer operations with CM Labs' Internal Transfer Vehicle Simulator Training Pack. Enhance safety, reduce costs, and improve readiness for port environments.
Simlog Mobile Crane Personal Simulator's Corridor Following 4 Module has trainees move the concrete bucket along the three-section, z-shaped corridor on the ground from one end to the other, keeping the bucket at a constant height directly above the corridor while controlling sway.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Mobile Crane Personal Simulator's Pick, Lift, and Place Module has trainees configure the boom angle, extension mode, and length and then place the hook in the rigging target (blue sphere) above the load. Once triggered, lift the load and place it into the target. Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Signaling Module has trainees move a load to a target destination hidden from the view of the crane operator, and so a signal person is required.
The signal person must view the lift using the dedicated signal-person display and provide hand or voice signals to the crane operator to safely move the load into the target (the target changes color as the load gets closer).
Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the crane operator activates the horn. Telescope extend/retract control is disabled for this module.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Off-Highway Truck Personal Simulator's Corridor Driving 1 Module has trainees drive the truck through the corridor to the target. Each trial ends when the truck is over the target and parked (gear in Park, or gear in Neutral with parking brake engaged).
Simlog Off-Highway Truck Personal Simulator's Complete Haul Cycle 2 Module has trainees drive the truck from the dumping zone to the wheel loader. After the truck is fully loaded by the loader, return the dumping zone, dump the load and drive away.
Simlog's Reach Lift Truck Personal Simulator: Slalom 1 Forward Driving - pick up the load, drive forward through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Slalom 2 - Pick up the load, drive in reverse through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks 2, Standard Aisles - Working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks, Narrow Aisles - working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog Mining Truck Personal Simulator - Corridor Driving Module: Trainees drive the truck through the corridor to the target. The trial ends when the truck is over the target and parked (gear in Park or Neutral with parking brake engaged).
Pages
-
-
A progressive training program for safe lifting, efficient operating, and complete worksite awareness in dense urban environments with the Intellia Luffing Tower Crane Simulator Training Pack from CM Labs. -
Train mini excavator operators with CM Labs’ industry-first Intellia Mini Excavator Simulator—offering realistic, safe, and effective skill development focused on tipping risks and operational precision. -
Train operators with CM Labs’ Mobile Harbor Crane Simulator, featuring realistic terminal operations, load handling, and challenging scenarios like wind, waves, and rigging failures. Designed for safe, high-impact learning. -
Train motor grader operators with CM Labs’ advanced simulator—featuring real-time scoring, true-to-life earthmoving physics, and self-guided learning tools for mastering fine grading and control. -
Train overhead crane operators with CM Labs’ realistic Overhead Crane Simulator Training Pack, featuring true-to-life scenarios, interactive faults, and comprehensive performance metrics. -
Train operators to safely and efficiently handle intermodal containers with CM Labs’ Reach Stacker Simulator. Includes weather scenarios, trailer handling, and inching pedal functionality. -
Progressive learning for safe lifting operations, improved rough terrain crane productivity, and real crane operator skills development with the Intellia Rough Terrain Crane Simulator Training Pack from CM Labs. -
Train RTG crane operators safely and effectively with CM Labs’ advanced simulator, featuring special loads, container variations, and realistic control systems for high-impact learning in a virtual terminal environment. -
Gain realistic port-side crane experience with the CM Labs Ship Pedestal Crane Simulator. Train on multiple cargo types with adjustable environments and full customization options.
