The Applied Electrical Control Learning System (90-EC1-A) teaches learners how to interpret, design, and operate relay control circuits using ladder diagrams. Electrical control is vital in the operation of electric and fluid power actuators and also forms the fundamental building block of automation systems like programmable logic controllers (PLCs), which are programmed using the electrical control schematic method, the ladder diagram.
Amatrol’s 950-GEO2D Geothermal Troubleshooting Learning System with Desuperheater uses an exposed component layout so that learners can see each component’s role in a geothermal system. Learners can easily observe, monitor, and test each component mounted and labeled on a vertical panel. Sight glasses installed in the 950-GEO2 allow the learner to see the refrigerant’s changing state as it passes through the system. Amatrol also includes pressure and temperature gauges at key points to show the system’s performance at a glance. Additionally, the system includes a custom designed, temperature-controlled ground simulator so the system can run continuously.
The 950-GEO2D is equipped with FaultPro, Amatrol’s premier electronic fault insertion program for teaching troubleshooting skills. Using FaultPro, learners troubleshoot electrical, mechanical, and fluid-based faults to become effective real-world experts on residential and commercial geothermal systems. In addition to troubleshooting, the interactive multimedia curriculum and hands-on skills will teach startup, operation, shutdown, and maintenance of a geothermal system.
Amatrol’s Hydraulic Maintenance Learning System (950-HM1) teaches skills related to servicing and maintaining hydraulic systems and components. Hydraulic systems are used in innumerable industrial areas like automotive, packaging, pharmaceutical, and food processing. This learning system provides a valuable learning experience for industrial maintenance technicians, system installers, and many others by covering hydraulic filter and fluid maintenance, fittings, seals, hydraulic hose and clamping devices, hydraulic tubing, and hydraulic component installation.
This system includes a mobile workstation, hose set and tubing rack, flush cart module, fittings module, component panel, and fluid servicing kit. Amatrol uses industry-standard components on its systems to ensure that learners gain hands-on practice with mechanisms they’ll use on-the-job. This improves both confidence and competency when performing tasks like replacing a spin-on filter or strainer, adding fluid to a hydraulic system, installing an O-ring seal, bleeding a hydraulic cylinder, or mounting and aligning a hydraulic cylinder.
Amatrol’s Hydraulic Troubleshooting Learning System (950-HT1) teaches advanced hydraulic troubleshooting like no other product by providing a hands-on learning station that models a real world hydraulically-powered machine and includes over 40 faults that can be inserted into the system. The 950-HT1 is the first product to offer a realistic electrical component troubleshooting experience for students, because the faults are inserted throughout the system, including the hydraulic, mechanical and electrical components.
Amatrol’s Basic Hydraulic Troubleshooting Learning System (950-HTB1) teaches learners how to troubleshoot hydraulic systems and their components, such as hydraulic motors, directional control valves, and cylinders. The system combines comprehensive curriculum with real-world equipment to create a valuable learning experience for maintenance technicians across a wide variety of industries. It also provides a strong foundation for those seeking important industry-standard certifications.
The hydraulic troubleshooting system features over 35 manually-inserted faults to help learners understand and practice troubleshooting common problems found in hydraulic systems. Sample faults include: motor starter failure, defective pump, worn cylinder seals, blocked flow control valves, and blocked inlet ports.
Print Reading is a foundational skill use throughout many industries. Amatrol’s Print Reading eLearning Courseware (M12207) covers topics like print dimensioning, assembly drawings and fasteners, and geometric dimensioning & tolerancing (GD&T). Learners using Amatrol’s print reading training course will study sketching, multiview drawings, dimensioning rules, first-angle projection, holes and fasteners, assembly drawings, assembly tolerances, and feature control frames. From this building block, learners can practice industry-relevant skills like selecting the appropriate number of views for an object, interpreting information blocks on a print, and calculating the limits of a dimension given its tolerance.
Amatrol's Piping Learning System (950-PS1) teaches learners how to lay out and assemble a fluid piping system used in industrial, construction, agricultural, and transportation applications. Students will learn how to select, size, identify, and install a variety of types of industrial fluid piping, fittings and valves including: iron pipe, steel tubing, hydraulic hose, plastic pipe, copper tubing, globe valves, gate valves, check valves, and Sloan valves.
The fluid piping trainer includes a mobile workstation, pump testing network, valve package, fitting package, fitting identification kits, Sloan valve maintenance kit, pipe insulation and hanger components, fitting storage, student learning materials for both theory and lab, and teacher’s guide. The workstation has slotted, movable members to enable a variety of hydraulic hose fluid piping application scenarios to be set up.
Amatrol’s Pneumatic Troubleshooting Learning System (950-PT1) teaches pneumatic troubleshooting skills like no other product on the market today. A hands-on learning station models a real-world electro-pneumatic machine featuring FaultPro, Amatrol’s exclusive computer-based fault insertion system. FaultPro allows 30 faults to be inserted into the system, teaching learners essential troubleshooting skills valuable throughout industry.
The pneumatic troubleshooting training system is the first product to offer a realistic troubleshooting experience for learners, because faults can be inserted throughout the system, including the pneumatic, mechanical, and electrical components. The system acts like a real machine with realistic loads and pressures, as well as real-world pneumatic components. The system can also be used to teach advanced pneumatics, system tuning, installation, and maintenance.
The Rigging Concepts 1 Training System (950-RGB1) teaches how to safely move loads of different shapes and sizes using a variety of methods. Major topics covered by this learning system include hoists, slings, lifts, wire ropes, and chain slings. Rigging skills are required in many industries including manufacturing, construction, and transportation, so give your students a head start by teaching them these rigging concepts and applications.
The Rigging Concept training course includes a 1-ton rated gantry crane with casters and component storage, hoists, slings, loads and load fittings to enable learners to replicate various on-the-job load movement applications. Hands-on, applied skills include installing an eyebolt for lifting, calculating crush force, assembling and lifting a load using a two-leg wire rope bridle sling with shackles, and many more! This learning system also includes student learning materials for theory and lab, an instructor’s guide, a student reference guide, and an optional eBook format for online learning. The 950-RGB1 can be used as solid foundation toward industrial certifications and industry standard safety practices are followed throughout.
Solar energy is being used in a broad range of applications across industry and residences alike. From heating water for home use to creating utility scale electricity – solar energy application is growing, as is the need for solar concepts training. Understanding the basics of how we can harness solar energy is essential for technicians, engineers, installers, designers, builders, and others who want to apply solar technology either professionally or personally.
Amatrol’s Solar Concepts Learning System (950-SC1) introduces learners to a broad range of basic concepts in solar energy and technology. Photovoltaic and thermal solar systems are introduced to students. They learn how to translate location, sun, and technology into practical applications. The Solar Concepts training acts as a foundation for students in solar technology. Solar Concepts includes student curriculum in a highly-interactive, multimedia format.
Amatrol’s Steam System Training System (950-SH1) introduces learners to the operation, installation, maintenance, and repair of steam systems and their application in paper mills, commercial and residential settings, power companies, and even nuclear submarines. Amatrol’s exceptionally thorough curriculum covers a comprehensive range of steam system topics, including both practical applications such as how to operate a boiler and theoretical knowledge like the coefficient of volume and thermal expansion.
The 950-SH1 includes an electric boiler, blowdown separator, condensate feedwater system, heat exchanger, strainer, and steam trap. This learning system also comes with a welded steel mobile workstation (32-in W x 82-in H x 92- in L) with 4” square welded steel tubing and heavy duty casters. Amatrol supplies these industrial-grade, top-flight components in order to give the learner an opportunity to work with real-world mechanisms and gain experience they would normally only acquire on the job.
Pages
-
Item Number:90-EC1A -
Item Number:ERSThere are eight "Simulation Modules" of increasing difficulty, starting with Controls Familiarization. The final modules combine elements of dipper fill at the rock face, and cab-side or blind-side truck loading. A simulated Mining Truck is built right in, to help teach truck spotting interaction. Key "Performance Indicators" measure how quickly and how carefully the simulated work is performed. -
Item Number:743-01This trainer provides students and instructors with the opportunity to demonstrate, investigate and fault-find the circuitry and operation of off-car charging systems. -
Item Number:730-10 / 730-00Desktop training systems provide very specific instruction and practice in the basic skills that are required by students as they embark on their careers. -
Item Number:740-01LJ Create's Electric Vehicle Systems Panel Trainer provides students and instructors with the opportunity to demonstrate, investigate, and fault-find a simulation of the electrical system of a typical electric vehicle. -
Item Number:810-000Teach the critical safety skill of electrical lock-out/tag-out with DAC Worldwide's Electrical Lock-Out/Tag-Out Training System (Model: 810-000). This hands-on, portable trainer ensures your workforce is prepared to handle hazardous electrical energy safely and effectively. -
Item Number:85-MT7BAmatrol’s Electrical Power Distribution Learning System (85-MT7B) teaches a broad range of electrical advanced manufacturing skills, such as installing, maintaining, and troubleshooting modern power distribution systems that require skills ranging from setting up basic raceways to selecting appropriate over-current protection for sensitive equipment. -
Item Number:SMMT / MT / FGT / LOTOTeach Electro-Mechanical Maintenance skills with Bayport Technical products, such as training systems for Flanges and Gaskets, Lock Out/Tagout, Pumps, and Motors, as well as a Lubrication Working Demonstrator. -
Item Number:T5600Train learners on real-world process instrumentation with Amatrol’s T5600, featuring Endress+Hauser components for flow, level, pressure, temperature, HART, Bluetooth, and Ethernet communications. -
Item Number:255KEDAC Worldwide's Enhanced Control Valve Dissectible (255KE) is a realistic, hands-on valve sample that supports realistic classroom training.
