Hose and Tube Fitting

Amatrol’s Pneumatic Fitting Construction Learning System (94-PFC-1) covers how to select the proper fittings required for connecting components and installing fittings to hoses and flexible tubing. Major topics covered by the Pneumatic Fittings training system include air supply connections, control air connections, and power air connections. The topics and pneumatic skills included in this system are required knowledge for any technician or engineer involved in the construction of pneumatic systems.

The Pneumatic Fittings training system includes a tabletop workstation with pre-mounted pneumatic components like a pneumatic cylinder, flow control valve, manifold, and directional control valve. Learners will use these and other components to practice skills like installing a rubber hose onto a push-on type fitting, connecting tubing using a ferrule type fitting, and installing a bulkhead fitting. Working with these industrial-grade components will help learners gain confidence and build real-world applicable skills for rewarding careers like industrial maintenance technicians.

Amatrol’s Geothermal Flush Cart Learning System (95-GEO3) teaches how to purge debris and air from the geothermal loop and then charge it with a glycol/water solution. Dirt and plastic pipe shavings can become trapped in geothermal systems during construction and must be purged to avoid damaging the system during operation. Proper procedures for filling and pressurizing the system must be followed to avoid aerating the fluid being used to charge the system or this entrained air will lower system performance.

The Electric Torque Wrench Learning System (95-PAS3) teaches learners how to use a high-speed, precise torque tool. Precision assembly requires accurate fastener tension in bolted assemblies. Amatrol's Electric Torque Wrench training system teaches the operation and application of electric torque wrenches with threaded fasteners.

Amatrol's Instrumented DC-Electric Torque Wrench Learning System (95-PAS5) adds to the Production Assembly Training System (950-PAS1) to teach use of an instrumented impulse torque wrench in fastener assembly. This production assembly training system includes a right-angle nutrunner, control box and cable, 3/8-in. drive 19mm socket, and a 90-degree flange. This system covers instrumented impulse torque wrenches through skills like DC electric controlled tool operation and inspection and how to assemble a threaded fastener using a DC electric controlled tool.