Training aids for heat transfer skills include industrial components like a U-Tube Heat Exchanger, Vertical Thermosyphon Reboiler, Multi-Port Plate Exchanger, Multi-Pass Floating Head, Fixed Tube Sheet Single Pass, and more
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks 2, Standard Aisles - Working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks, Narrow Aisles - working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog Mining Truck Personal Simulator - Corridor Driving Module: Trainees drive the truck through the corridor to the target. The trial ends when the truck is over the target and parked (gear in Park or Neutral with parking brake engaged).
Simlog Mining Truck Personal Simulator - Complete Haul Cycle 1 Module: Trainees drive the truck from the dumping zone to the rope shovel and position the truck under the dipper (the shovel's horn will sound when the truck is appropriately positioned).
After the truck has been fully loaded (the shovel's horn will sound when the loading is complete), return to the dumping zone, dump the load and drive away.
Simlog Electric Rope Shovel - Following Grade Module: make the rightmost dipper tooth follow the line (the cursor changes color as the tooth moves away from the line). The trial ends when the tooth reaches the end of the line, and the operator activates the horn.
Simlog Electric Rope Shovel - Single-Pass Digging Module: Fill the dipper by digging at the rock face. The trial ends when there is material in the dipper, the dipper is no longer in contact with the rock face, and the operator activates the horn.
Simlog’s Bulldozer Personal Simulator puts students behind the controls of a medium-sized Bulldozer as they experience the reality of a typical construction site. The virtual work site features dynamic terrain with life-like dirt pushing and spreading.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.
Simlog's Mobile Crane Personal Simulator (Advanced Edition) puts trainees at the controls of a modern rough-terrain mobile crane equipped with a telescoping boom with deflection, a jib, and a realistic dashboard. The virtual worksite is set in a construction environment with various loads and hook blocks for training.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations. Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
The Simlog Mobile Crane Personal Simulator offers a powerful, immersive way to train crane operators safely and affordably. Designed to replicate real-world lifting scenarios, the simulator focuses on essential skills such as boom control, hook alignment, swing coordination, and load management—without putting people or equipment at risk.
This virtual training solution helps reduce costly on-site errors while reinforcing best practices for jobsite safety and crane operation. Whether for workforce development or vocational education, Simlog’s crane simulator provides scalable, repeatable training that prepares operators for the real thing.
Pages
-
-
Item Number:TFX-C-HCSTThe TacMed Simulation Hemorrhage Control Skills Trainer - Classroom (HCST-C) is a medical intervention simulator designed to teach fundamental skills for tourniquet application and hemostatic wound packing. -
Item Number:373-110DAC Worldwide’s Hermetic Compressor Cutaway (373-110) is an expertly-sectioned example of a common fractional-horsepower refrigeration compressor, which facilitates and supports practical training in compressor design, operating principles, and maintenance. -
Item Number:373-160DAC Worldwide’s Hermetic Rotary Compressor Cutaway is an expertly-sectioned example of a common fractional horsepower rotary-type refrigeration compressor. The industrial learning device facilitates and supports practical training in AC compressor design, operating principles, and maintenance. -
Item Number:373-130This Hermetic Scroll Refrigeration Compressor Cutaway provides a full cutaway view of the compressor body that exposes the complete internal components, and operating principles. Economically mounted on a formed-steel and powder-coated baseplate assembly, the product can be mounted on a variety of related optional display, storage, and workstation products. -
OnRobot 6-axis force torque sensors provide accurate force and torque measurements along all 6 axes. This gives you precise control when it comes to difficult assembly, polishing, sanding or deburring jobs. Additionally, the HEX software includes path recording, force control and special features for insertion tasks. -
Item Number:868-PACDAC Worldwide’s Hose and Coupling Sample Board (868-PAC) is a package of four (4) rack-mountable sample boards, and an associated rolling rack support assembly (910) that allows for convenient training in the safe identification, installation, and removal of multiple common hose and coupling assemblies. -
Item Number:T7300The HVAC Controls System, T7300, is a comprehensive training solution with features inspired by the 85-MT5 Electric Motor Control Training System. It offers a dual-sided layout with 12 panels (expandable) and incorporates built-in safety mechanisms and optional FaultPro computer-based fault insertion software. -
Item Number:756-01The Hybrid and Electric Vehicle Trainer provides students and instructors with the opportunity to demonstrate, investigate, and fault-find a simulation of a hybrid vehicle electrical system. -
Item Number:850-CD1Amatrol’s Basic Fluid Power Learning System – Double-Sided A-Frame Bench with Two Hydraulic Manifolds (850-CD1) is built to provide for both hydraulic and pneumatic systems training. Equipped with one set of basic hydraulics training (85-BH) panels and basic pneumatics training (85-BP) panels.
