Expand SimSpray 3.0 training with aircraft parts and scenarios designed for aerospace painting and abrasive blasting practice.
The Aerospace Content Pack adds 14 aircraft components, industry-specific paint and material systems, a virtual hangar environment, and specialized curriculum. Learners can practice approaching curves, control surfaces, panels, doors, and other geometry encountered in aerospace coating work.
Parts include a small plane, wing, front and rear fuselage sections, cowling, doors, fenders, nose cap and spinner, tail and wing control surfaces, engine cowling, plane pylon, strut panel, and wing panel.
This pack is available for SimSpray 3.0 models configured with Paint or Abrasive Blasting processes.
Content availability may vary by software version and system configuration.
Give learners repeatable virtual practice with vehicle parts used in automotive painting, refinishing, and surface-preparation training.
The SimSpray 3.0 Automotive Content Pack includes 15 vehicle parts, industry-specific paint and material systems, a virtual mechanic-garage environment, and specialized curriculum. The collection progresses from individual panels to larger vehicle sections with varied curves, edges, and orientations.
The collection includes a car bumper, door, fender, vertical and horizontal hood projects, horizontal wagon roof, motorcycle gas tank and fender, sedan front and rear bumpers, left-side doors and panel, roof, hood, and a complete sedan.
This pack is available for SimSpray 3.0 models configured with Paint or Abrasive Blasting processes.
Content availability may vary by software version and system configuration.
Bring architectural painting practice into a controlled virtual environment with 29 building components and training rooms.
The SimSpray 3.0 Building Trades Content Pack supports painting and decorating instruction with common interior and exterior surfaces. Learners can practice coverage, positioning, and movement around openings, trim, cabinetry, masonry, ceilings, siding, and other architectural features.
Projects include doors, walls, openings, windows, trim, shelves, cabinets, a fireplace mantel, ceilings, floors, cinderblock and brick walls, exterior shingles, exterior siding, and four complete training-room environments.
This pack is available for SimSpray 3.0 models configured with Paint processes.
Content availability may vary by software version and system configuration.
Develop foundational coating technique with geometric shapes and standardized testing panels included with compatible SimSpray 3.0 configurations.
The Default Parts Content Pack gives learners a structured progression from basic flat panels to curves, corners, cylinders, grooves, shapes, and cutouts. Eight ASTM and ACQPA testing panels extend practice to components used in industrial coating and inspection contexts.
Parts include horizontal and vertical panels, curved and complex panels, a box, interior and exterior corners, horizontal and vertical cylinders, combined cylinders, a large cylinder, a half sphere, and panels with grooves, shapes, and cutouts.
This content is available for SimSpray 3.0 models configured with Paint or Abrasive Blasting processes.
Exact materials and lessons may vary by configuration.
Practice furniture, cabinetry, and wood-finishing applications with varied shapes in a virtual woodshop environment.
The SimSpray 3.0 Furniture & Cabinetry Content Pack adds 15 parts, customizable wood stains and paints, material systems, and specialized curriculum. Learners encounter flat surfaces, frames, rails, shelves, lattice, furniture, and other shapes that require consistent gun control and coverage.
The collection includes a four-panel door, railing, bookshelf, cabinet door and drawer, small through large cabinet frames, dining chair and table, refrigerator end panel, headboard, lattice, party chair, and wood panel.
This pack is available for SimSpray 3.0 models configured with Paint processes.
Content availability may vary by software version and system configuration.
Introduce marine coating and surface-preparation challenges with ship structures and propellers designed for SimSpray 3.0.
The Marine Parts Content Pack provides six virtual parts for Paint and Abrasive Blasting practice. Customizable paints and material systems, specialized training environments, and guided curriculum help learners build experience with supports, openings, broad surfaces, and curved propeller geometry.
The collection includes a bulkhead with T-bar support, manway opening, T-bar support, ship side, small ship propeller, and large ship propeller.
This pack requires SimSpray software version 3.4.1 or later and a compatible Paint or Abrasive Blasting configuration.
Content availability may vary by system configuration.
Prepare learners for large railcar surfaces and confined interior geometry with repeatable virtual coating practice.
The SimSpray 3.0 Rail Content Pack adds 16 interior and exterior components from boxcars, hoppers, and tank cars. Industry-specific paint and material systems, a virtual rail-yard environment, and specialized curriculum support both coating and abrasive blasting instruction.
Parts include complete boxcar, hopper, and tank-car projects plus exterior and interior ends, sides, heads, and tops. This range lets learners practice broad surfaces, rounded tanks, recessed areas, and interior structures.
This pack is available for SimSpray 3.0 models configured with Paint or Abrasive Blasting processes.
Content availability may vary by software version and system configuration.
Develop industrial coating techniques with beams, panels, and bridge structures that present edges, channels, recesses, and broad surfaces.
The SimSpray 3.0 Structural Content Pack includes nine industrial parts, industry-specific paint and material systems, The Bridge virtual training environment, and specialized curriculum. It supports repeatable practice for structural painting, protective coatings, and abrasive blasting.
The collection includes large and small H-beams, large and small I-beams, a half barrel, large panel set, vertical piece, bridge section, and shelved panel structure.
This pack is available for SimSpray 3.0 models configured with Paint or Abrasive Blasting processes.
Content availability may vary by software version and system configuration.
Practice coating large commercial vehicles and individual body components with American and European truck projects.
The Truck Parts Content Pack adds 10 commercial vehicle parts for Paint and Abrasive Blasting training. Customizable paints and material systems, specialized environments, and guided curriculum help learners practice coverage across large surfaces, body panels, doors, fenders, and hoods.
The collection includes an American large semi-trailer and separate door, fender, and hood projects; an American medium truck and separate door, fender, and hood projects; plus a European large semi-trailer and door.
This pack requires SimSpray software version 3.4.1 or later and a compatible Paint or Abrasive Blasting configuration.
Content availability may vary by system configuration.
Build a safer, more effective welding program with equipment, curriculum, training and support from one industry-leading source.
The Lincoln Electric® Education Solutions Catalog provides an overview of the products and services available to welding educators, industrial trainers and workforce development programs.
Download the catalog to explore complete solutions for welding and cutting instruction—from professional welding equipment and consumables to virtual welding simulators, CNC plasma cutting systems, robotic welding cells, curriculum, certifications and instructor development.
Lincoln Electric provides more than individual welding machines. Its education solutions help schools create coordinated programs that connect classroom instruction, hands-on practice, safety, certification and advanced manufacturing technology.
Programs can combine traditional welding equipment with virtual simulation, CNC plasma cutting and robotic welding to build progressive learning experiences for students at different skill levels.
The catalog includes solutions for high schools, community and technical colleges, universities, apprenticeship programs, correctional training programs, workforce development organizations and industrial training facilities.
Whether you are updating several welding booths or designing a new training facility, Tech-Labs can help you evaluate equipment, curriculum, safety considerations, training requirements and implementation needs.
Explore welding booths, tables, extraction arms, Prism® Exhaust Booths, portable extraction units, downdraft tables, filter banks and other fume-control solutions. Lincoln Electric also offers consultation services to help programs evaluate space limitations, applications, maintenance requirements and environmental needs.
Tech-Labs works with educational institutions and workforce development organizations to plan, equip and support welding and fabrication programs. Our team can help you identify the right combination of equipment, safety systems, curriculum and training for your students, facility and budget.
