Train backhoe operators with CM Labs’ advanced simulator—featuring the only solution that replicates backlash and instability for realistic, skill-focused learning in safe virtual environments.
Simlog Mobile Crane Personal Simulator's Corridor Following 4 Module has trainees move the concrete bucket along the three-section, z-shaped corridor on the ground from one end to the other, keeping the bucket at a constant height directly above the corridor while controlling sway.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Mobile Crane Personal Simulator's Pick, Lift, and Place Module has trainees configure the boom angle, extension mode, and length and then place the hook in the rigging target (blue sphere) above the load. Once triggered, lift the load and place it into the target. Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Signaling Module has trainees move a load to a target destination hidden from the view of the crane operator, and so a signal person is required.
The signal person must view the lift using the dedicated signal-person display and provide hand or voice signals to the crane operator to safely move the load into the target (the target changes color as the load gets closer).
Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the crane operator activates the horn. Telescope extend/retract control is disabled for this module.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Off-Highway Truck Personal Simulator's Corridor Driving 1 Module has trainees drive the truck through the corridor to the target. Each trial ends when the truck is over the target and parked (gear in Park, or gear in Neutral with parking brake engaged).
Simlog Off-Highway Truck Personal Simulator's Complete Haul Cycle 2 Module has trainees drive the truck from the dumping zone to the wheel loader. After the truck is fully loaded by the loader, return the dumping zone, dump the load and drive away.
Simlog's Reach Lift Truck Personal Simulator: Slalom 1 Forward Driving - pick up the load, drive forward through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Slalom 2 - Pick up the load, drive in reverse through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks 2, Standard Aisles - Working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks, Narrow Aisles - working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog Mining Truck Personal Simulator - Corridor Driving Module: Trainees drive the truck through the corridor to the target. The trial ends when the truck is over the target and parked (gear in Park or Neutral with parking brake engaged).
Pages
-
-
Train safer, smarter, and more efficiently with CM Labs’ Intellia Boom Truck Simulator Training Pack. Prepare operators for real-world certification using industry-approved exercises and engineering-grade simulation. -
Master excavation and grading techniques with CM Labs’ Bulldozer Simulator—featuring realistic 6-way blade control, innovative soil simulation, and immersive scenarios that build precision and efficiency. -
Provide Compact Track Loader Operators with essential training that helps reduce the likelihood of accidents due to tipping with the Intellia Compact Track Loader Simulator Training Pack from CM Labs. -
Progressive learning for safe lifting operations, crawler crane productivity, and real crane operator skills development with the Intellia Crawler Crane Simulator Training Pack from CM Labs. -
Prepare students and operators for CCO crane certification with the Intellia Digger Derrick Simulator Training Pack, offering realistic machine simulation and performance metrics that develop safe, efficient skills. -
CM Labs’ Intellia Drone View transforms how instructors monitor and assess operator training. Instead of being limited to in-person views, instructors can observe trainees in real-time using three immersive perspectives—drone flyover, avatar walk-through, or subterranean view. This innovative tool enhances feedback, catches negative habits early, and accelerates skills development in virtual training environments. -
CM Labs’ Intellia Empty Container Handler Simulator Training Pack allows you to prepare trainees for the realities of operating equipment in a busy terminal, without placing equipment or personnel at risk or decreasing productivity. -
Progressive learning for safe lifting operations, crane productivity, and real crane operator skills with the Intellia Flat-Top Tower Crane Simulator from CM Labs. -
Build real-world forklift skills in a safe, virtual environment with CM Labs’ simulator. From basic handling to advanced load control, trainees gain confidence through realistic, progressive learning scenarios.
