DAC Worldwide’s Vertical Separator Trainer (295-101) is a reduced-scale, three-phase vertical separator that mimics its real-world counterpart by using alternate production stream components, refined oil, air, and water.
Hose and Tube Fitting
Amatrol’s Pneumatic Fitting Construction Learning System (94-PFC-1) covers how to select the proper fittings required for connecting components and installing fittings to hoses and flexible tubing. Major topics covered by the Pneumatic Fittings training system include air supply connections, control air connections, and power air connections. The topics and pneumatic skills included in this system are required knowledge for any technician or engineer involved in the construction of pneumatic systems.
The Pneumatic Fittings training system includes a tabletop workstation with pre-mounted pneumatic components like a pneumatic cylinder, flow control valve, manifold, and directional control valve. Learners will use these and other components to practice skills like installing a rubber hose onto a push-on type fitting, connecting tubing using a ferrule type fitting, and installing a bulkhead fitting. Working with these industrial-grade components will help learners gain confidence and build real-world applicable skills for rewarding careers like industrial maintenance technicians.
Amatrol’s Geothermal Flush Cart Learning System (95-GEO3) teaches how to purge debris and air from the geothermal loop and then charge it with a glycol/water solution. Dirt and plastic pipe shavings can become trapped in geothermal systems during construction and must be purged to avoid damaging the system during operation. Proper procedures for filling and pressurizing the system must be followed to avoid aerating the fluid being used to charge the system or this entrained air will lower system performance.
The 95-PAS2 Split Flange Coupling Learning System teaching learners how to identify, select, install and troubleshoot a split flange coupling. Incorrect assembly of a split flange coupling can lead to product failure, code compliance issues, and safety problems. Amatrol's Split Flange Coupling Learning system equips learners with the knowledge to select and use split flange coupling correctly, as well as teaching them the hands-on skills need to work well with these types of connections.
The Electric Torque Wrench Learning System (95-PAS3) teaches learners how to use a high-speed, precise torque tool. Precision assembly requires accurate fastener tension in bolted assemblies. Amatrol's Electric Torque Wrench training system teaches the operation and application of electric torque wrenches with threaded fasteners.
The Stall Bar Training System (95-PAS4) teaches learners how to use a stall bar torque tool to assemble threaded fasteners. These are often used in assembly operations requiring very accurate torque.
Amatrol's Instrumented DC-Electric Torque Wrench Learning System (95-PAS5) adds to the Production Assembly Training System (950-PAS1) to teach use of an instrumented impulse torque wrench in fastener assembly. This production assembly training system includes a right-angle nutrunner, control box and cable, 3/8-in. drive 19mm socket, and a 90-degree flange. This system covers instrumented impulse torque wrenches through skills like DC electric controlled tool operation and inspection and how to assemble a threaded fastener using a DC electric controlled tool.
Hands-On Skills with Parallel and Series Pumps
Amatrol’s Multiple Pump Learning System (95-PM1-A) adds onto Amatrol’s Pumps training system (950-PM1) by including an additional centrifugal pump and electric motor, allowing learners to study the functions and real world applications of series and parallel pumps. This industrial pump training system presents practical skills such as pump installation and pump operation for series and parallel pumps with theoretical knowledge like measuring and graphing flow/pressure characteristics and calculating pump efficiency.
Pump Maintenance and Troubleshooting
The Turbine Pump Learning System (95-PM1-B) explores an exceptionally versatile industrial pump that’s used in many environments, such as water treatment plants, paper mills, ski resorts, farms, and airports. When integrated with Amatrol’s centrifugal pumps training system (950-PM1), this system allows learners to get training on different types of turbine pumps, their functions and applications, and their flow/pressure characteristics. This system also explains pump installation, pump maintenance, pump troubleshooting, and how to disassemble a turbine pump.
Hands-On Skills with Parallel and Series Pumps
The Diaphragm Pump Learning System (95-PM1-C) explains the function, operation, application, and variety of diaphragm pumps. Diaphragm pumps are used to transfer fluid that’s too viscous, corrosive, abrasive, or hot for other types of industrial pumps, making it a perfect choice for moving food products such as peanut butter, ink for the print industry, and pulp, paper, and petroleum products. The diaphragm pump training system explores how to adjust a diaphragm pump flow rate, how to select the right diaphragm pump for an application. It also covers pump installation, pump maintenance, disassembly, and pump troubleshooting.
Pages
-
Item Number:295-101 -
Item Number:295-101-PACDAC Worldwide's Vertical Separator Training System Plus (295-101-PAC) is a realistic working demonstration separation system that duplicates the process at a reduced scale using alternate production stream components: refined oil, air, and water. -
Item Number:289DAC Worldwide's Vertical Thermosyphon Reboiler Heat Exchanger Training Model (289) is a highly-detailed scale model of a vertical thermosyphon reboiler, supporting training in the operation and maintenance of industrial heat exchangers. -
Item Number:VG10The compact OnRobot VG10 Universal Robot Vacuum Gripper doesn't require a compressor or air supply bringing flexibility to your production line and saving maintenance costs. It has flexible arms and an adjustable vacuum enabling the VG10 to handle a variety of objects in many different sizes. -
Item Number:VGC10The OnRobot VGC10 electrical compact universal robot vacuum gripper has unlimited customization possibilities. Smaller than the VG10, the VGC10 can fit into tight environments to extend your automation possibilities. -
Item Number:VGP20With payloads up to 20kg, the OnRobot VGP20 is a powerful electric powered universal robot vacuum gripper ideal for quickly and cost-effectively automating the palletizing of cardboard boxes, as well as handling bulky, porous, and irregularly shaped objects. -
Item Number:203-000DAC Worldwide’s Vibration Analysis Training System (203-000) is a heavy-duty learning package that allows for in-depth training in vibration analysis, using a vibration meter, gear/belt drives, and bearing faults. -
Item Number:203-PACDAC Worldwide’s Vibration Analysis Training System Plus (203-PAC) is a heavy-duty learning package that allows for in-depth training in vibration analysis, using a vibration meter, gear/belt drives, and bearing faults. -
With our Workplace Safety package, you get four modules that allow learners to put safety training into practice in a safe, virtual environment. -
Item Number:VLS 2.30DTThe VLS2.30DT Desktop is a compact and economical entry-level platform. It offers a material processing envelope of 16" x 12" x 4" or 768 in³ and can be equipped with one 10.6µm CO2 laser source ranging in power from 10 to 30 watts or one 9.3µm CO2 30 watt laser source.
