SACA's Micro-Credentials can be attained to prove efficiency in specific applications or combined to attain a full SACA Specialist Certification. The Smart Automation Certification Alliance (SACA) is a non-profit organization supported by industry partners and educators.
Amatrol’s 950-GEO2D Geothermal Troubleshooting Learning System with Desuperheater uses an exposed component layout so that learners can see each component’s role in a geothermal system. Learners can easily observe, monitor, and test each component mounted and labeled on a vertical panel. Sight glasses installed in the 950-GEO2 allow the learner to see the refrigerant’s changing state as it passes through the system. Amatrol also includes pressure and temperature gauges at key points to show the system’s performance at a glance. Additionally, the system includes a custom designed, temperature-controlled ground simulator so the system can run continuously.
The 950-GEO2D is equipped with FaultPro, Amatrol’s premier electronic fault insertion program for teaching troubleshooting skills. Using FaultPro, learners troubleshoot electrical, mechanical, and fluid-based faults to become effective real-world experts on residential and commercial geothermal systems. In addition to troubleshooting, the interactive multimedia curriculum and hands-on skills will teach startup, operation, shutdown, and maintenance of a geothermal system.
Amatrol’s Hydraulic Maintenance Learning System (950-HM1) teaches skills related to servicing and maintaining hydraulic systems and components. Hydraulic systems are used in innumerable industrial areas like automotive, packaging, pharmaceutical, and food processing. This learning system provides a valuable learning experience for industrial maintenance technicians, system installers, and many others by covering hydraulic filter and fluid maintenance, fittings, seals, hydraulic hose and clamping devices, hydraulic tubing, and hydraulic component installation.
This system includes a mobile workstation, hose set and tubing rack, flush cart module, fittings module, component panel, and fluid servicing kit. Amatrol uses industry-standard components on its systems to ensure that learners gain hands-on practice with mechanisms they’ll use on-the-job. This improves both confidence and competency when performing tasks like replacing a spin-on filter or strainer, adding fluid to a hydraulic system, installing an O-ring seal, bleeding a hydraulic cylinder, or mounting and aligning a hydraulic cylinder.
Amatrol’s Hydraulic Troubleshooting Learning System (950-HT1) teaches advanced hydraulic troubleshooting like no other product by providing a hands-on learning station that models a real world hydraulically-powered machine and includes over 40 faults that can be inserted into the system. The 950-HT1 is the first product to offer a realistic electrical component troubleshooting experience for students, because the faults are inserted throughout the system, including the hydraulic, mechanical and electrical components.
Amatrol’s Basic Hydraulic Troubleshooting Learning System (950-HTB1) teaches learners how to troubleshoot hydraulic systems and their components, such as hydraulic motors, directional control valves, and cylinders. The system combines comprehensive curriculum with real-world equipment to create a valuable learning experience for maintenance technicians across a wide variety of industries. It also provides a strong foundation for those seeking important industry-standard certifications.
The hydraulic troubleshooting system features over 35 manually-inserted faults to help learners understand and practice troubleshooting common problems found in hydraulic systems. Sample faults include: motor starter failure, defective pump, worn cylinder seals, blocked flow control valves, and blocked inlet ports.
Print Reading is a foundational skill use throughout many industries. Amatrol’s Print Reading eLearning Courseware (M12207) covers topics like print dimensioning, assembly drawings and fasteners, and geometric dimensioning & tolerancing (GD&T). Learners using Amatrol’s print reading training course will study sketching, multiview drawings, dimensioning rules, first-angle projection, holes and fasteners, assembly drawings, assembly tolerances, and feature control frames. From this building block, learners can practice industry-relevant skills like selecting the appropriate number of views for an object, interpreting information blocks on a print, and calculating the limits of a dimension given its tolerance.
Amatrol's Piping Learning System (950-PS1) teaches learners how to lay out and assemble a fluid piping system used in industrial, construction, agricultural, and transportation applications. Students will learn how to select, size, identify, and install a variety of types of industrial fluid piping, fittings and valves including: iron pipe, steel tubing, hydraulic hose, plastic pipe, copper tubing, globe valves, gate valves, check valves, and Sloan valves.
The fluid piping trainer includes a mobile workstation, pump testing network, valve package, fitting package, fitting identification kits, Sloan valve maintenance kit, pipe insulation and hanger components, fitting storage, student learning materials for both theory and lab, and teacher’s guide. The workstation has slotted, movable members to enable a variety of hydraulic hose fluid piping application scenarios to be set up.
Amatrol’s Pneumatic Troubleshooting Learning System (950-PT1) teaches pneumatic troubleshooting skills like no other product on the market today. A hands-on learning station models a real-world electro-pneumatic machine featuring FaultPro, Amatrol’s exclusive computer-based fault insertion system. FaultPro allows 30 faults to be inserted into the system, teaching learners essential troubleshooting skills valuable throughout industry.
The pneumatic troubleshooting training system is the first product to offer a realistic troubleshooting experience for learners, because faults can be inserted throughout the system, including the pneumatic, mechanical, and electrical components. The system acts like a real machine with realistic loads and pressures, as well as real-world pneumatic components. The system can also be used to teach advanced pneumatics, system tuning, installation, and maintenance.
The Rigging Concepts 1 Training System (950-RGB1) teaches how to safely move loads of different shapes and sizes using a variety of methods. Major topics covered by this learning system include hoists, slings, lifts, wire ropes, and chain slings. Rigging skills are required in many industries including manufacturing, construction, and transportation, so give your students a head start by teaching them these rigging concepts and applications.
The Rigging Concept training course includes a 1-ton rated gantry crane with casters and component storage, hoists, slings, loads and load fittings to enable learners to replicate various on-the-job load movement applications. Hands-on, applied skills include installing an eyebolt for lifting, calculating crush force, assembling and lifting a load using a two-leg wire rope bridle sling with shackles, and many more! This learning system also includes student learning materials for theory and lab, an instructor’s guide, a student reference guide, and an optional eBook format for online learning. The 950-RGB1 can be used as solid foundation toward industrial certifications and industry standard safety practices are followed throughout.
Solar energy is being used in a broad range of applications across industry and residences alike. From heating water for home use to creating utility scale electricity – solar energy application is growing, as is the need for solar concepts training. Understanding the basics of how we can harness solar energy is essential for technicians, engineers, installers, designers, builders, and others who want to apply solar technology either professionally or personally.
Amatrol’s Solar Concepts Learning System (950-SC1) introduces learners to a broad range of basic concepts in solar energy and technology. Photovoltaic and thermal solar systems are introduced to students. They learn how to translate location, sun, and technology into practical applications. The Solar Concepts training acts as a foundation for students in solar technology. Solar Concepts includes student curriculum in a highly-interactive, multimedia format.
Amatrol’s Steam System Training System (950-SH1) introduces learners to the operation, installation, maintenance, and repair of steam systems and their application in paper mills, commercial and residential settings, power companies, and even nuclear submarines. Amatrol’s exceptionally thorough curriculum covers a comprehensive range of steam system topics, including both practical applications such as how to operate a boiler and theoretical knowledge like the coefficient of volume and thermal expansion.
The 950-SH1 includes an electric boiler, blowdown separator, condensate feedwater system, heat exchanger, strainer, and steam trap. This learning system also comes with a welded steel mobile workstation (32-in W x 82-in H x 92- in L) with 4” square welded steel tubing and heavy duty casters. Amatrol supplies these industrial-grade, top-flight components in order to give the learner an opportunity to work with real-world mechanisms and gain experience they would normally only acquire on the job.
Pages
-
-
DAC Worldwide’s sample boards offer valuable maintenance training in the identification and selection of a variety of industrial components. Each sample board features a selection of industrial-quality components mounted on either a panel or a station that features nameplates for easy association with individual components.
-
Item Number:278-180SSDAC Worldwide’s Sanitary Air-Operated Diaphragm Pump Cutaway, Stainless (278-180SS) depicts a sectioned industrial air-operated, double-diaphragm pump (AODD) cutaway that supports realistic classroom training in the operation, construction, and maintenance of this common process pump used in many industries. -
Item Number:273-410SSDAC’s Sanitary Diaphragm Valve Cutaway, Stainless (273-410SS) is a specialized, sectioned valve and actuator assembly that unveils the complete working mechanism of a representative diaphragm-actuated, stainless steel control valve used in sanitary service. -
SanitationSim™ Series 8 waste disposal driving simulator delivers safe, scenario-based training for sanitation and recycling drivers—improving safety, efficiency, and fleet performance. -
Falls from scaffolds account for roughly 25% of fatal falls from all working surfaces. The primary goal of this course is to teach workers safe work procedures to follow when working on or around scaffolding. -
Item Number:373-529DAC Worldwide’s Schrader Service Valve Cutaway (373-529) is an economical, professionally-crafted specialty valve cutaway that supports training relating to Schrader valves, which are widely used for testing, servicing, and recharging within refrigeration and air-conditioning systems. -
Item Number:273-520DAC's Scotch-Yoke Actuator Cutaway (273-520) is a detailed valve actuator cutaway that depicts a common Scotch yoke-type valve actuator often used as a closure device on industrial 1/4-turn valves. -
Item Number:278-190DAC Worldwide’s Screw Pump Cutaway (278-190) depicts a sectioned industrial screw-type pump allows for convenient and realistic classroom training in the operation, construction, and maintenance of common process pumps used in various applications across the globe. -
Item Number:275-190DAC Worldwide’s Screw Pump Dissectible (Imo) (275-190) is one of a limited group of enhanced dissectible products. This re-manufactured, realistic dissectible industrial pump can be used for training relating to the repair and overhaul of specialized process pumps.
