DAC Worldwide’s Single-Phase PSC AC Motor Cutaway (273-950) is one of a series of related sectioned motors. This permanent split capacitor (PSC) motor cutaway supports industrial training activities related to electric motor types, as well as HVAC system repair and troubleshooting.
Pump Maintenance & Troubleshooting Skills
The Magnetic Pump Learning System (95-PM1-G) covers the magnetic pump, which uses a magnetic coupling to prevent direct contact between the motor drive shaft and the pump impeller. This feature eliminates any possibility of leakage or seepage and makes the magnetic pump an ideal selection for pumping hazardous chemicals that could harm the environment or for expensive liquids where it is important to reduce loss. This industrial pumps training system explains the function, operation, installation, disassembly, inspection, and maintenance of a magnetic pump.
Additional topics include: how to properly align the magnetic coupling; how to troubleshoot problems; how to select the correct magnetic pump for an application; how to determine a pump’s flow/pressure characteristics; and how each component of the pump factors into the overall operation.
Pump Maintenance Skills
The Centrifugal Pump with Stuffing Box Learning System (95-PM1H) covers a pump design that, in spite of the modern mechanical seal, remains widely used in industry due to its cost-effectiveness and ability to avoid catastrophic failure. This feature makes it an ideal design for fire departments in fire pump applications. This industrial pumps training system explains the installation, function, and maintenance of a centrifugal pump with a stuffing box.
Additional topics include: how to troubleshoot this pump design; what the flow/pressure characteristics of a centrifugal pump are; and how to startup and operate a centrifugal pump with a stuffing box.
The model 950-PM1 Centrifugal Pumps Training System teaches skills related to centrifugal pumps training, which are used in almost every industry to transfer non-hydraulic fluids of various types from one place to another. Students learn a comprehensive set of industry-relevant skills including how to operate, install, maintain, troubleshoot, analyze performance, and select centrifugal pumps as well as system design.
The model 950-PM1 includes a centrifugal pump, mobile test workstation, student learning materials for both theory and lab, and teacher’s guide. This centrifugal pumps operation and maintenance training system uses industrial quality components such as a cast iron centrifugal pump to help students become better prepared for what they will encounter on the job.
Amatrol’s Rigging 2 Learning System (95-RGB2) adds to the first Rigging training system (950-RGB1) to offer a comprehensive learning experience, to teach rigging safety training and industrial crane operation skills, and to help learners prepare for certifications. This hands-on Rigging training system expands on the initial offering of rigging knowledge to include synthetic slings, equipment movement, and industrial cranes. Proper rigging techniques are vital for efficient movement of loads and workers safety.
This Crane Operation training course includes two synthetic slings, four load protection pads, jack, lever dolly, and much more! These components will be used to explore topics such as synthetic sling operation, equipment movement using roller bars and dollies, and crane operation signals. In addition to equipment and printed curriculum, this industrial system offers a student reference guide, instructor’s manual, installation guide, and an optional online rigging training course.
Amatrol’s Rigging 3 Learning System (95-RGB3) adds to the initial hands-on rigging training systems (950-RGB1 and 95-RGB2) by including hands-on wire mesh sling skills, rigging knots training, and rigging safety skills. This advanced rigging training system provides learners with additional components and skills to further expand their understanding and competency of rigging. Proper rigging techniques are vital for efficient movement of loads and workers safety.
This advanced rigging training system includes a rope system, D-shackle, steel tubing, a metal mesh sling, and much more! These components will be used to explore topics such as making a long, short, and eye splice in a fiber rope, describing the function of a tag line, and learning how to assemble and lift a load using a wire mesh sling. In addition to equipment and printed curriculum, this system offers a student reference guide, instructor’s manual, installation guide, and an optional online eBook.
Amatrol’s Solar Site Analysis Training System (95-SA1) teaches learners both the theoretical knowledge and hands-on skills they will need to analyze and choose suitable locations for solar arrays and components. Learners begin by studying how to conduct a preliminary site assessment, including applicable codes, jurisdictional authorities, permits, and licenses required for solar energy system installations.
Learners will also use real-world equipment, like the Solar Pathfinder sun path calculator, to perform and interpret a shading analysis in order to determine suitable locations for electrical photovoltaic and solar thermal components. The included multimedia curriculum also teaches other relevant skills, such as developing site layout drawings.
The Solar Thermal Cold Water Supply Station training is designed to reduce the temperature of hot water from the open loop (950-STOL1), closed loop (950-STCL1), or installation solar thermal (950-STF1) learning systems and feed it back to the learning system at a temperature and pressure that is similar to a city water supply. This system will enable the three solar thermal learning systems to be self-contained.
The Solar Thermal Cold Water Supply Station training includes the frame, AC pump, AC chiller, water storage tank, ball valves for shutoffs and bypasses, relief valve to adjust temperature and pressure output, temperature gauges, a pressure gauge at outlet of chiller, control unit, ground fault circuit interrupter, and an AC circuit breaker with lockout / tagout.
Amatrol's AC/DC Electrical Learning Systems 1 and 2 (96-ADE1 and 96-ADE2) cover the fundamentals of electricity, such as electric measurement training and basic electrical cir-cult training, as well as Inductance, capacitance, and transformers. Electricity Is the most widely used utility and the demand will continue to increase as technology continues to grow. This means that more engineers and technicians will be needed to Install, develop, and maintain electrical devices. These learning systems include a large array of Industrial electrical power and control components, typical of what learners will find In real world applications. This hands-on experience Is Invaluable In today's workplace.
Amatrol's Computer Aided Design (CAD) 1 – SolidWorks learning system introduces solid modeling by describing the function of solid modeling software and the features of solid modeling. Solid model creation is taught by having the learner use sketch commands and tools to create a sketch and extruded boss/base features to create a solid model. Solid model features such as drawing planes; extruding cut features, fillets and chamfers; and revolved features are explored. Also included are topics such as multi-view drawings, dimensioning, and title blocks.
Amatrol’s Computer-Aided Manufacturing (CAM) 1 Learning System (96-CAM1) teaches learners the fundamentals of part design and development using Mastercam software. Mastercam allows learners to design and draw complex shapes and parts on a computer. These drawings can then be utilized to generate a program to produce learner-designed parts using the CNC Machines 1 Learning System (96-CNC1). Major topic areas covered by this course include the CAM mill process, tool and material selection, CAM parameters, contour toolpaths, and much more!
The 96-CAM1 training system includes Windows-based Mastercam software, a custom tensile specimen fixture kit featuring an adapter plate, 1/4-inch and 3/8-inch end mills, and a supplemental disc containing various CAM design files. This system’s interactive eLearning curriculum covers major CAM topics and theory, which learners can then use to practice various hands-on skills that can then be used in real-world applications. This curriculum is full of incredible graphics, 3D animations, and interactions.
Pages
-
Item Number:273-950 -
Item Number:273-912DAC Worldwide’s Single-Phase Transformer Cutaway (273-912) is a detailed and professionally-crafted single-phase transformer cutaway that depicts a common shell-type, single-phase transformer. -
Item Number:SSLSimlog’s new Skid Steer Loader Personal Simulator, the world’s first, puts you at the controls of a typical skid steer loader equipped with either a bucket (there are two kinds) or forks, at work in a typical construction site. Three configurations are offered for the simulator controls to reproduce the most common kinds of operator controls in the cabin of real skid steer loaders. -
Item Number:275-139DAC's 275-139 is a realistic industrial pump for use in classroom and laboratory training relating to process pumps. -
Item Number:895Amatrol’s Smart Controls Troubleshooting Workstation (895) teaches hands-on programmable logic controller (PLC) troubleshooting skills needed in various applications with Industry 4.0 technologies. Trainees will learn how to operate, program, and troubleshoot PLCs that interface with many applications, including electro-pneumatics; motor control; temperature control; variable frequency drives; smart sensors; process control; and I/O Link communications. -
Item Number:990-SD10Amatrol’s Portable Smart Machine Sensor Learning System (990-SD10) offers training for building skills with smart capacitive, inductive, photo, ultrasonic, and more, all within an easily portable case. The Smart Machine Sensor training system is instrumental for learners to understand Industry 4.0 concepts and practice with components commonly found in Industrial Internet of Things (IIoT) environments. -
Amatrol Smart Factory training system and in-depth curriculum teaches all aspects of smart factory maintenance and operation. -
Item Number:ESG 1Features 9 stations that can be individually configured. -
Item Number:603-SPDiscover the DAC Worldwide Smart Process Plant Training System (603-SP). Equip learners with hands-on training in process control systems, including level, pressure, temperature, flow, and pH, using industry-standard components and advanced software. -
Item Number:87-SWPF1VThe 87-SWPF1V Smart Robot Logistics Palletizing Workcell, which includes a mobile workstation with a FANUC 6-axis robotic arm, teaches students how to operate, program, maintain, and troubleshoot a robotic palletizing workcell.
