Master solar energy troubleshooting with Amatrol’s 950-SPT1. This hands-on training system teaches PV system operation, maintenance, and diagnostics using real industrial components and multimedia eLearning.
Nylon 12 is a semi-crystalline, FDM® thermoplastic. As with other semi-crystalline materials used in traditional manufacturing processes, special considerations should be implemented to ensure an optimal part is obtained. The information in this document illustrates the following considerations:
- Tip Selection
- Build Modes
- Porosity
- Sacrificial Tower Features
- Build Sheets
- Support Removal
- Annealing
FDM® Nylon 12 filament is the 3D printing equivalent of standard industrial PA12 (polyamide 12) material. A strong engineering thermoplastic that exhibits toughness and high impact strength without being brittle. Its excellent fatigue properties make it a good option for repetitive-flex applications such as snap-fit clips, closures, and press-fit inserts.
Other applications include jigs, fixtures, low-volume production parts, and accurate prototyping of nylon 12 high-volume injection molded parts. FDM Nylon 12 is available in black.
FDM® Nylon-CF10 is a composite material combining a blended nylon polymer with 10% chopped carbon fiber (by weight), enhancing the material’s strength and rigidity. The nylon base polymer also gives FDM Nylon-CF10 good chemical resistance.
FDM® Nylon 12CF™ is a PA12 (polyamide 12) thermoplastic filament reinforced with chopped carbon fiber, 35% by weight. It has the highest flexural strength of any FDM thermoplastic, resulting in the highest stiffness-to-weight ratio. The combination of high strength, stiffness, and light weight makes it an optimal replacement for heavier metal components in appropriate use cases.
Typical applications include strong, lightweight tooling, functional prototyping and select end-use parts.
FDM Nylon 6™ combines strength and toughness superior to other FDM thermoplastics, for applications that require strong, customized parts and tooling that lasts longer and withstands rigorous functional testing.
Engineered with nylon 6, a popular thermoplastic for manufacturing, this material works with the Fortus 900mc™ to produce durable parts with a clean finish and high break resistance. FDM Nylon 6 is ideal for product manufacturers and development engineers in automotive, aerospace, consumer goods, and industrial manufacturing.
PC-ABS is a blend of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) thermoplastics. The result is an FDM filament that exhibits optimal characteristics of each – excellent strength, high toughness and heat resistance, and good flexural strength. Choose PC-ABS when you need the strength of PC but the impact resistance of ABS.
PC-ABS is suitable for various applications that include prototyping, tooling, and low-volume production. Available colors are black, white, and red.PC-ISO (polycarbonate-ISO), an industrial thermoplastic, is biocompatible in its raw state (ISO 10993 USP Class VI)* and can be gamma or EtO sterilized. PC-ISO is commonly used in food and drug packaging and medical device manufacturing because of the material’s strength and medical compatibility. When combined with a Fortus® 3D Printer, PC-ISO gives you parts that can be used for conceptual modeling, functional prototyping, and production parts.
PC is a polycarbonate FDM® filament that brings the attributes of this industrial plastic to 3D printing applications. PC is characterized by its high strength, impact resistance, dimensional stability, and heat resistance. These attributes make it a good choice for 3D-printed prototypes, parts, and tools that demand higher material properties than ABS or ASA. FDM PC is available in white, black, and red.
Material properties are an important consideration when evaluating additive manufacturing for advanced applications such as production runs of end-use parts. Since these products will be in service for extended periods and in varying conditions, qualifying the properties beyond published specifications is imperative.
ULTEM™ 1010 resin is a flame-retardant, high-performance thermoplastic for direct digital manufacturing and rapid prototyping. ULTEM™ 1010 resin offers good chemical resistance, high heat resistance and tensile strength, and the lowest coefficient of thermal expansion (CTE) of any FDM® thermoplastic. Its high strength-to-weight ratio and FST (flame, smoke, and toxicity) ratings make it an excellent choice for the commercial transportation industry, especially aerospace, marine, and ground vehicles.
ULTEM™ 1010 resin is offered in a certified grade (ULTEM™ 1010 resin CG), with documentation for food contact and biocompatibility compliance.
Pages
-
Item Number:950-SPT1 -
Item Number:950-STF1Prepare for NABCEP certification with Amatrol’s Solar Thermal Installation Training System (950-STF1). Learn hands-on solar thermal system installation and commissioning for commercial and residential applications. -
Item Number:200-2045DAC Worldwide’s Spherical Roller Bearing Pillow Block Assembly Cutaway (200-2045) is a carefully-sectioned, industrial-quality spherical roller bearing pillow block assembly designed to be used in either classroom or laboratory mechanical drives training. Each unit is an actual piece of industrial equipment chosen from common models by well-known U.S. manufacturers for training relevance. -
Item Number:410-000AC electric motors are found in a wide variety of industrial, commercial, and residential applications. Industrial maintenance technicians must develop industry-relevant skills, such as how to operate, install, design, and troubleshoot AC electric motor control circuits for various applications.
-
Item Number:SLTTrain operators efficiently and safely with Simlog's Stand Up Counterbalanced Lift Truck Personal Simulator. Perfect for OSHA Class 2 training, it features photo-realistic graphics, configurable controls, and multi-display options. -
Item Number:274DAC Worldwide’s Steam Trap Cutaway Assortment - 4 Components (274) includes four industrial traps – float and thermostatic trap, inverted bucket trap, thermodynamic trap, and thermostatic trap – for hands-on skill-building using industrial steam traps. -
Item Number:249-PACDAC's 249-PAC is a complete steam turbine training aid used on industrial equipment, such as pumps, fans, blowers, and air compressors. -
Item Number:MCK-UALB-MR2Students design, build, and program drones for aerial search and rescues, GPS-guided crop dusting, autonomous deliveries to remote locations, and other compelling industry-related challenges. -
Item Number:MCK-FDLB-4x4Introduce students to robotics with easy to assemble and modify rovers that feature real-world applications. Working collaboratively, students build and program advanced robots. -
Item Number:MCK-FDLB-6X6The MINDS-i Foundations Curriculum as an introduction to STEM and Robotics designed as an interactive approach to applied science, technology, engineering, and math. In this course, students will become familiar with the basics of robotics and programming through teamwork
