Simlog Mining Truck Personal Simulator - Complete Haul Cycle 1 Module: Trainees drive the truck from the dumping zone to the rope shovel and position the truck under the dipper (the shovel's horn will sound when the truck is appropriately positioned).
After the truck has been fully loaded (the shovel's horn will sound when the loading is complete), return to the dumping zone, dump the load and drive away.
Simlog Electric Rope Shovel - Following Grade Module: make the rightmost dipper tooth follow the line (the cursor changes color as the tooth moves away from the line). The trial ends when the tooth reaches the end of the line, and the operator activates the horn.
Simlog Electric Rope Shovel - Single-Pass Digging Module: Fill the dipper by digging at the rock face. The trial ends when there is material in the dipper, the dipper is no longer in contact with the rock face, and the operator activates the horn.
Simlog’s Bulldozer Personal Simulator puts students behind the controls of a medium-sized Bulldozer as they experience the reality of a typical construction site. The virtual work site features dynamic terrain with life-like dirt pushing and spreading.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.
Simlog's Mobile Crane Personal Simulator (Advanced Edition) puts trainees at the controls of a modern rough-terrain mobile crane equipped with a telescoping boom with deflection, a jib, and a realistic dashboard. The virtual worksite is set in a construction environment with various loads and hook blocks for training.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations. Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
The Simlog Mobile Crane Personal Simulator offers a powerful, immersive way to train crane operators safely and affordably. Designed to replicate real-world lifting scenarios, the simulator focuses on essential skills such as boom control, hook alignment, swing coordination, and load management—without putting people or equipment at risk.
This virtual training solution helps reduce costly on-site errors while reinforcing best practices for jobsite safety and crane operation. Whether for workforce development or vocational education, Simlog’s crane simulator provides scalable, repeatable training that prepares operators for the real thing.
Simlog's Tower Crane Personal Simulator puts trainees at the controls of a modern freestanding top-slewing tower crane with a trolley jib. The virtual worksite is set in a typical construction environment and features terrain with various loads and hook blocks for training.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.
Simlog’s Off-Highway Truck Personal Simulator puts students at the controls of a modern, sophisticated off-highway truck with lifelike driving dynamics in interaction with a built-in Wheel Loader. The virtual mine site features challenging driving scenarios and interactive dumping and loading zones.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.
Simlog's Electric Rope Shovel Personal Simulator puts trainees at the controls of a realistic Electric Rope Shovel at work in a typical mine site, with a built-in interactive Mining Truck.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.
Pages
-
SACA's Micro-Credentials can be attained to prove efficiency in specific applications or combined to attain a full SACA Specialist Certification. The Smart Automation Certification Alliance (SACA) is a non-profit organization supported by industry partners and educators.
-
DAC Worldwide’s sample boards offer valuable maintenance training in the identification and selection of a variety of industrial components. Each sample board features a selection of industrial-quality components mounted on either a panel or a station that features nameplates for easy association with individual components.
-
Item Number:278-180SSDAC Worldwide’s Sanitary Air-Operated Diaphragm Pump Cutaway, Stainless (278-180SS) depicts a sectioned industrial air-operated, double-diaphragm pump (AODD) cutaway that supports realistic classroom training in the operation, construction, and maintenance of this common process pump used in many industries.
-
Item Number:273-410SSDAC’s Sanitary Diaphragm Valve Cutaway, Stainless (273-410SS) is a specialized, sectioned valve and actuator assembly that unveils the complete working mechanism of a representative diaphragm-actuated, stainless steel control valve used in sanitary service.
-
SanitationSim™ Series 8 waste disposal driving simulator delivers safe, scenario-based training for sanitation and recycling drivers—improving safety, efficiency, and fleet performance.
-
Falls from scaffolds account for roughly 25% of fatal falls from all working surfaces. The primary goal of this course is to teach workers safe work procedures to follow when working on or around scaffolding.
-
Item Number:373-529DAC Worldwide’s Schrader Service Valve Cutaway (373-529) is an economical, professionally-crafted specialty valve cutaway that supports training relating to Schrader valves, which are widely used for testing, servicing, and recharging within refrigeration and air-conditioning systems.
-
Item Number:273-520DAC's Scotch-Yoke Actuator Cutaway (273-520) is a detailed valve actuator cutaway that depicts a common Scotch yoke-type valve actuator often used as a closure device on industrial 1/4-turn valves.
-
Item Number:278-190DAC Worldwide’s Screw Pump Cutaway (278-190) depicts a sectioned industrial screw-type pump allows for convenient and realistic classroom training in the operation, construction, and maintenance of common process pumps used in various applications across the globe.
-
Item Number:275-190DAC Worldwide’s Screw Pump Dissectible (Imo) (275-190) is one of a limited group of enhanced dissectible products. This re-manufactured, realistic dissectible industrial pump can be used for training relating to the repair and overhaul of specialized process pumps.


















