DAC’s Sanitary Diaphragm Valve Cutaway, Stainless (273-410SS) is a specialized, sectioned valve and actuator assembly that unveils the complete working mechanism of a representative diaphragm-actuated, stainless steel control valve used in sanitary service.
The Backfilling 1 module of Simlog’s Bulldozer Personal Simulator introduces trainees to essential earthmoving tasks in a controlled, virtual setting. Operators learn how to manage blade position, material flow, and movement control to efficiently backfill trenches and depressions—skills critical on real-world construction sites.
This video demonstrates how the simulator reinforces key techniques like forward pushing, blade leveling, and maintaining smooth, consistent backfill layers. With a focus on safety, precision, and production efficiency, this module helps new operators gain confidence while reducing risk and training costs.
Simlog Mobile Crane Personal Simulator's Pole Topping Module has trainees lifting a rubber tire load onto the tops of a series of poles in order. The target pole is marked with blue rings that will turn green once the pole has been topped.
Simlog Mobile Crane Personal Simulator's Pole Placement Module has trainees carefully lift the pole off the ground and then place it into the target hole (the target changes color as the pole gets closer) while avoiding obstacles and unstable positions.
Simlog Mobile Crane Personal Simulator's Corridor Following 4 Module has trainees move the concrete bucket along the three-section, z-shaped corridor on the ground from one end to the other, keeping the bucket at a constant height directly above the corridor while controlling sway.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Mobile Crane Personal Simulator's Pick, Lift, and Place Module has trainees configure the boom angle, extension mode, and length and then place the hook in the rigging target (blue sphere) above the load. Once triggered, lift the load and place it into the target. Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Signaling Module has trainees move a load to a target destination hidden from the view of the crane operator, and so a signal person is required.
The signal person must view the lift using the dedicated signal-person display and provide hand or voice signals to the crane operator to safely move the load into the target (the target changes color as the load gets closer).
Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the crane operator activates the horn. Telescope extend/retract control is disabled for this module.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Off-Highway Truck Personal Simulator's Corridor Driving 1 Module has trainees drive the truck through the corridor to the target. Each trial ends when the truck is over the target and parked (gear in Park, or gear in Neutral with parking brake engaged).
Simlog Off-Highway Truck Personal Simulator's Complete Haul Cycle 2 Module has trainees drive the truck from the dumping zone to the wheel loader. After the truck is fully loaded by the loader, return the dumping zone, dump the load and drive away.
Simlog's Reach Lift Truck Personal Simulator: Slalom 1 Forward Driving - pick up the load, drive forward through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Slalom 2 - Pick up the load, drive in reverse through the slalom course, and place the load on the floor at the target position defined by a red outline.
Pages
-
Item Number:273-410SS -
SanitationSim™ Series 8 waste disposal driving simulator delivers safe, scenario-based training for sanitation and recycling drivers—improving safety, efficiency, and fleet performance. -
Falls from scaffolds account for roughly 25% of fatal falls from all working surfaces. The primary goal of this course is to teach workers safe work procedures to follow when working on or around scaffolding. -
Item Number:373-529DAC Worldwide’s Schrader Service Valve Cutaway (373-529) is an economical, professionally-crafted specialty valve cutaway that supports training relating to Schrader valves, which are widely used for testing, servicing, and recharging within refrigeration and air-conditioning systems. -
Item Number:273-520DAC's Scotch-Yoke Actuator Cutaway (273-520) is a detailed valve actuator cutaway that depicts a common Scotch yoke-type valve actuator often used as a closure device on industrial 1/4-turn valves. -
Item Number:278-190DAC Worldwide’s Screw Pump Cutaway (278-190) depicts a sectioned industrial screw-type pump allows for convenient and realistic classroom training in the operation, construction, and maintenance of common process pumps used in various applications across the globe. -
Item Number:275-190DAC Worldwide’s Screw Pump Dissectible (Imo) (275-190) is one of a limited group of enhanced dissectible products. This re-manufactured, realistic dissectible industrial pump can be used for training relating to the repair and overhaul of specialized process pumps. -
This course will educate learners on best practices for maintaining general security in the workplace and safeguarding against cyber threats. -
Item Number:373-120DAC Worldwide’s Semi-Hermetic Compressor Cutaway (373-120) is an expertly-sectioned example of a common intermediate (1”-1 ½”) horsepower semi-hermetic refrigeration compressor that facilitates and supports practical training in compressor design, operating principles, and maintenance. -
Item Number:205-150The dissectible features a carefully restored, industrial shaft mounted, hollow-shaft helical gear reducer to provide learners with a realistic training experience
