With Amatrol’s Residential Mini-Split Heat Pump Learning System (T7130) you can teach the critical hands-on technical skills HVAC/R technicians need when working with residential ductless (“mini-split”) HVAC systems. Students will work with real equipment, including a heat pump condenser, evaporator unit, thermostat, panel-mounted gauges, and condensate pump.
Amatrol’s 950-GEO2D Geothermal Troubleshooting Learning System with Desuperheater uses an exposed component layout so that learners can see each component’s role in a geothermal system. Learners can easily observe, monitor, and test each component mounted and labeled on a vertical panel. Sight glasses installed in the 950-GEO2 allow the learner to see the refrigerant’s changing state as it passes through the system. Amatrol also includes pressure and temperature gauges at key points to show the system’s performance at a glance. Additionally, the system includes a custom designed, temperature-controlled ground simulator so the system can run continuously.
The 950-GEO2D is equipped with FaultPro, Amatrol’s premier electronic fault insertion program for teaching troubleshooting skills. Using FaultPro, learners troubleshoot electrical, mechanical, and fluid-based faults to become effective real-world experts on residential and commercial geothermal systems. In addition to troubleshooting, the interactive multimedia curriculum and hands-on skills will teach startup, operation, shutdown, and maintenance of a geothermal system.
Amatrol’s Hydraulic Maintenance Learning System (950-HM1) teaches skills related to servicing and maintaining hydraulic systems and components. Hydraulic systems are used in innumerable industrial areas like automotive, packaging, pharmaceutical, and food processing. This learning system provides a valuable learning experience for industrial maintenance technicians, system installers, and many others by covering hydraulic filter and fluid maintenance, fittings, seals, hydraulic hose and clamping devices, hydraulic tubing, and hydraulic component installation.
This system includes a mobile workstation, hose set and tubing rack, flush cart module, fittings module, component panel, and fluid servicing kit. Amatrol uses industry-standard components on its systems to ensure that learners gain hands-on practice with mechanisms they’ll use on-the-job. This improves both confidence and competency when performing tasks like replacing a spin-on filter or strainer, adding fluid to a hydraulic system, installing an O-ring seal, bleeding a hydraulic cylinder, or mounting and aligning a hydraulic cylinder.
Amatrol’s Hydraulic Troubleshooting Learning System (950-HT1) teaches advanced hydraulic troubleshooting like no other product by providing a hands-on learning station that models a real world hydraulically-powered machine and includes over 40 faults that can be inserted into the system. The 950-HT1 is the first product to offer a realistic electrical component troubleshooting experience for students, because the faults are inserted throughout the system, including the hydraulic, mechanical and electrical components.
Amatrol’s Basic Hydraulic Troubleshooting Learning System (950-HTB1) teaches learners how to troubleshoot hydraulic systems and their components, such as hydraulic motors, directional control valves, and cylinders. The system combines comprehensive curriculum with real-world equipment to create a valuable learning experience for maintenance technicians across a wide variety of industries. It also provides a strong foundation for those seeking important industry-standard certifications.
The hydraulic troubleshooting system features over 35 manually-inserted faults to help learners understand and practice troubleshooting common problems found in hydraulic systems. Sample faults include: motor starter failure, defective pump, worn cylinder seals, blocked flow control valves, and blocked inlet ports.
Print Reading is a foundational skill use throughout many industries. Amatrol’s Print Reading eLearning Courseware (M12207) covers topics like print dimensioning, assembly drawings and fasteners, and geometric dimensioning & tolerancing (GD&T). Learners using Amatrol’s print reading training course will study sketching, multiview drawings, dimensioning rules, first-angle projection, holes and fasteners, assembly drawings, assembly tolerances, and feature control frames. From this building block, learners can practice industry-relevant skills like selecting the appropriate number of views for an object, interpreting information blocks on a print, and calculating the limits of a dimension given its tolerance.
Amatrol's Piping Learning System (950-PS1) teaches learners how to lay out and assemble a fluid piping system used in industrial, construction, agricultural, and transportation applications. Students will learn how to select, size, identify, and install a variety of types of industrial fluid piping, fittings and valves including: iron pipe, steel tubing, hydraulic hose, plastic pipe, copper tubing, globe valves, gate valves, check valves, and Sloan valves.
The fluid piping trainer includes a mobile workstation, pump testing network, valve package, fitting package, fitting identification kits, Sloan valve maintenance kit, pipe insulation and hanger components, fitting storage, student learning materials for both theory and lab, and teacher’s guide. The workstation has slotted, movable members to enable a variety of hydraulic hose fluid piping application scenarios to be set up.
Amatrol’s Pneumatic Troubleshooting Learning System (950-PT1) teaches pneumatic troubleshooting skills like no other product on the market today. A hands-on learning station models a real-world electro-pneumatic machine featuring FaultPro, Amatrol’s exclusive computer-based fault insertion system. FaultPro allows 30 faults to be inserted into the system, teaching learners essential troubleshooting skills valuable throughout industry.
The pneumatic troubleshooting training system is the first product to offer a realistic troubleshooting experience for learners, because faults can be inserted throughout the system, including the pneumatic, mechanical, and electrical components. The system acts like a real machine with realistic loads and pressures, as well as real-world pneumatic components. The system can also be used to teach advanced pneumatics, system tuning, installation, and maintenance.
The Rigging Concepts 1 Training System (950-RGB1) teaches how to safely move loads of different shapes and sizes using a variety of methods. Major topics covered by this learning system include hoists, slings, lifts, wire ropes, and chain slings. Rigging skills are required in many industries including manufacturing, construction, and transportation, so give your students a head start by teaching them these rigging concepts and applications.
The Rigging Concept training course includes a 1-ton rated gantry crane with casters and component storage, hoists, slings, loads and load fittings to enable learners to replicate various on-the-job load movement applications. Hands-on, applied skills include installing an eyebolt for lifting, calculating crush force, assembling and lifting a load using a two-leg wire rope bridle sling with shackles, and many more! This learning system also includes student learning materials for theory and lab, an instructor’s guide, a student reference guide, and an optional eBook format for online learning. The 950-RGB1 can be used as solid foundation toward industrial certifications and industry standard safety practices are followed throughout.
Solar energy is being used in a broad range of applications across industry and residences alike. From heating water for home use to creating utility scale electricity – solar energy application is growing, as is the need for solar concepts training. Understanding the basics of how we can harness solar energy is essential for technicians, engineers, installers, designers, builders, and others who want to apply solar technology either professionally or personally.
Amatrol’s Solar Concepts Learning System (950-SC1) introduces learners to a broad range of basic concepts in solar energy and technology. Photovoltaic and thermal solar systems are introduced to students. They learn how to translate location, sun, and technology into practical applications. The Solar Concepts training acts as a foundation for students in solar technology. Solar Concepts includes student curriculum in a highly-interactive, multimedia format.
Amatrol’s Steam System Training System (950-SH1) introduces learners to the operation, installation, maintenance, and repair of steam systems and their application in paper mills, commercial and residential settings, power companies, and even nuclear submarines. Amatrol’s exceptionally thorough curriculum covers a comprehensive range of steam system topics, including both practical applications such as how to operate a boiler and theoretical knowledge like the coefficient of volume and thermal expansion.
The 950-SH1 includes an electric boiler, blowdown separator, condensate feedwater system, heat exchanger, strainer, and steam trap. This learning system also comes with a welded steel mobile workstation (32-in W x 82-in H x 92- in L) with 4” square welded steel tubing and heavy duty casters. Amatrol supplies these industrial-grade, top-flight components in order to give the learner an opportunity to work with real-world mechanisms and gain experience they would normally only acquire on the job.
Pages
-
Item Number:T7130 -
Item Number:123-01Explore renewable energy, battery storage, EV charging, and smart home technologies with the Smart Home Energy Trainer (123-01). This hands-on training system helps students develop real-world skills in residential energy management, grid interaction, and energy diagnostics. -
Item Number:950-SH1Amatrol’s Steam System Training System (950-SH1) introduces learners to the operation, installation, maintenance, and repair of steam systems and their application in paper mills, commercial and residential settings, power companies, and even nuclear submarines. -
Item Number:F170 / F370The Stratasys F Series is the ultimate, all-in-one rapid prototyping system for your entire team. It combines the power of FDM with the ease of GrabCAD Print for the most versatile and intelligent solution available. -
Item Number:J55The Stratasys J55 Prime 3D printer introduces full color, high fidelity with tactile, functional, and sensory capabilities - making the efficiency and quality of PolyJet Technology more affordable and office-friendly than ever. -
Item Number:J850 DAPThe Stratasys J850™ Digital Anatomy™ 3D Printer combines materials and software to create 3D medical models of human anatomy that mimic bone and tissue with realism you can see and feel. -
Item Number:T7081Understanding HVAC/R, geothermal, refrigeration, and steam systems requires a good hold on the basics. With Amatrol's T7081 Applied Thermal Science Trainer, you can provide the hands-on training your students or employees need. -
BOFA’s Advantage 350 fume extraction and filtration system effectively removes potentially harmful fumes and particulates created during the laser marking process. By maintaining a dust-free operating area, the system helps to protect valuable equipment, maintain a higher quality mark, and reduce the number of rejects and contaminants.
The quiet and compact Advantage 350 is ideal for use in light-duty laser marking applications, including schools, sign making workshops and small-scale industrial environments.
-
Our largest high-volume fume extractor with unique Gullwing filter access design making filter exchange quick, safe and easy.
BOFA’s AD 4000 laser fume extraction unit combines large filter capacity with high airflows. This combination makes the AD 4000 ideal for large laser engravers, laser cutters as well as multiple laser coding installations.
Easily accessible filters are accommodated by the uniquely styled gas spring assisted ‘Gull Winged’ doors, which allow for maximum space and ease when changing filters.
-
BOFA’s AD 1000 iQ high end laser extraction system combines extremely large filter capacity with high airflow and pressure rates, making it the ideal choice for heavy-duty applications that generate large amounts of particulate and gaseous organic compounds.
Performance has now been further enhanced with the inclusion of several new features including BOFA’s new iQ Operating System, making the new AD 1000 iQ one of the most advanced system available.
