Each Basic Hydraulics training system features standard industrial grade components. This attention to quality gives students experience they would normally only get on-the-job by helping them recognize industrial components and how to troubleshoot them more effectively. Components included with Basic Hydraulics are pre-mounted on circuit panels with silk-screened labels next to each, which facilitates ease of use and identification.
VRNA’s immersive virtual reality experiences are a more effective and cost-efficient way to teach Emergency Medical Response skills.
VRNA EMS by VRSim, Inc. revolutionizes Emergency Medical Responder (EMR) training by offering a cost-effective and accessible solution for immersive, hands-on skill development. Unlike traditional, limited-use mannequins, VRNA EMS provides access to 10 scenario-based simulations covering essential testable skills required for state and national certification. This VR experience empowers students to learn and practice emergency care in a low-risk environment, fostering skill acquisition whether in class, at home, or as a supplementary tool alongside lab and field training.
With scenarios including Cardiac Arrest, Home Birth, Drug Overdose Response, Spinal Immobilization, Vehicle Extrication, Joint Immobilization, Bleeding Control, Shock Response, and more, VRNA EMS offers an innovative approach to enhance EMR education and certification.
Skills Coverage
- CPR / AED
- Assist with Non-Complicated Childbirth
- Apneic Response from Drug Overdose
- Bleeding Control
- Long-Bone Immobilization
- Joint Immobilization
- Patient Assessment
- Shock Management
- Spinal Immobilization of Seated Patient
- Spinal Immobilization of Supine Patient
- Vehicle Extrication
Increase the effectiveness and lower the cost of teaching CNA lab skills using a fully immersive VR experience.
VRNA redefines learning patient care by offering students a secure environment for practice, whether at school, home, or as an addition to lab training, reducing the need for extensive equipment and costly lab preparations. Specifically tailored for Certified Nurse Assistants (CNAs), VRNA's immersive VR training features eight scenarios aligned with testable competencies in CNA certification exams nationwide.
This compact, all-in-one VR headset delivers a simulated environment enabling students to hone real-world patient care skills effectively, significantly enhancing the efficiency and reducing the expenses associated with CNA lab skill instruction.
Skill Coverage
Ambulation Assist (Cane)
Ambulation Assist (Crutches)
Ambulation Assist (Walker)
Assist with Anti-Embolism Stockings
Bed Bath
Bedpan Assist
Blood Pressure
Catheter Care
Collect Urine Sample
Denture Care
Dressing
Hand Hygiene & Gloving
Ambulation Assist (Crutches)
Ambulation Assist (Walker)
Assist with Anti-Embolism Stockings
Bed Bath
Bedpan Assist
Blood Pressure
Catheter Care
Collect Urine Sample
Denture Care
Dressing
Hand Hygiene & Gloving
Height and Weight
Indirect Care
Making an Occupied Bed
Making an Unoccupied Bed
Massage Back
Meal Assist
Measure Intake and Output
Mouth Care Conscious
Mouth Care Unconscious
Nail Care
Obstructed Airway
Passive Range of Motion
Indirect Care
Making an Occupied Bed
Making an Unoccupied Bed
Massage Back
Meal Assist
Measure Intake and Output
Mouth Care Conscious
Mouth Care Unconscious
Nail Care
Obstructed Airway
Passive Range of Motion
Perineal Care
Positioning Side
Positioning Supine
Pulse and Respiration
Shaving
Shower Assist
Temperature (Axillary)
Temperature (Oral)
Temperature (Tympanic)
Transfer Assist
Urinal Assist
Positioning Side
Positioning Supine
Pulse and Respiration
Shaving
Shower Assist
Temperature (Axillary)
Temperature (Oral)
Temperature (Tympanic)
Transfer Assist
Urinal Assist
Tired of outdated training methods that don't meet your industry's demands? Meet Hard Hat VR, the revolutionary solution offering immersive and interactive training experiences. Say farewell to old-fashioned techniques and embrace the safety and efficiency of Virtual Reality!
Why Opt for Hard Hat VR?
- Realistic Scenarios: Practice in true-to-life environments minus the risks.
- Interactive Learning: Engage in hands-on training that truly sticks.
- Cost-Effectiveness: Cut down on training costs and downtime.
- Safety Comes First: Prepare for real-world dangers within a controlled setup.
Who Stands to Benefit?
This training solution is appropriate for industrial corporations, safety training professionals, and technical education institutes. This groundbreaking solution revolutionizes training approaches, enabling industrial giants to enhance their workforce's skills in a risk-free environment. Safety training professionals find a valuable ally in crafting immersive, hands-on experiences that instill safety protocols effectively. Meanwhile, technical education institutes harness the power of Hard Hat VR to equip students with practical, real-world insights, bridging the gap between theoretical learning and practical application.
Maximize Your ROI
Maximize your return on investment (ROI) with Hard Hat VR, experiencing a trifecta of advantages that transcend traditional training methods. Benefit from heightened training efficiency that ensures a more adept and skilled workforce. Elevate employee safety through immersive learning experiences, preparing them for real-world scenarios in a risk-free setting. Witness a boost in retention rates as knowledge retention is enhanced, paving the way for a more knowledgeable and competent team. Hard Hat VR not only revolutionizes training but also amplifies your overall organizational success through these invaluable advantages.
Discover how the latest CarTrain Diagnosis and Repair System is transforming high-voltage (HV) vehicle training for education and workforce development programs. Designed to deliver hands-on, real-world experience, CarTrain helps learners build the practical skills needed to safely and effectively diagnose, service, and repair modern electric and hybrid vehicle systems.
With real vehicle components, realistic fault simulations, and industry-relevant diagnostic procedures, CarTrain provides an immersive training experience that mirrors today’s automotive service environment.
Why CarTrain Stands Out
- Train with original automotive components for realistic, hands-on learning
- Integrated 400V HV system with built-in safety protection
- Learn proper shutdown procedures, troubleshooting methods, and repair processes used by leading manufacturers
- Develop practical skills through complete workflow-based training, from vehicle intake and diagnostics to repair and final inspection
Training Highlights
- Realistic fault simulation using defective components for advanced troubleshooting exercises
- Safe HV voltage measurement using multimeters and integrated measuring equipment
- Unique noise complaint troubleshooting for HV shielding diagnostics
- Visualize and analyze energy flows using real vehicle operating data
- Practice equipotential bonding measurements with authentic metal vehicle structures
- Flexible, manufacturer-independent training platform designed to prepare learners for a wide range of EV and hybrid vehicle systems
Whether you're preparing students for careers in automotive technology or upskilling current technicians, CarTrain delivers the hands-on experience needed to support the next generation of electric vehicle service professionals.
Delve into a realm of extensive training possibilities spanning advanced manufacturing, chemical manufacturing, marine, military, oil & gas, and power generation. The DAC 280 has been meticulously crafted to furnish a thorough comprehension of pump sealing systems, imparting invaluable insights and actionable advice.
See the newest addition to Stratasys' line-up - F3300. This introductory video will give you a glimpse of the new F3300 system, in addition to sharing some of its key features and benefits.
Ogle chose Stratasys’ Neo stereolithography 3D printers to maintain its position at the forefront of innovation, and it is now a central part of the company’s ability to meet and exceed customer expectations.
In this video, Amatrol visits East High School in Youngstown, Ohio, to see what’s happening in its Manufacturing Technology class, which uses the eLearning curriculum and hands-on trainers in Amatrol’s groundbreaking IGNITE: Mastering Manufacturing program.
Manufacturing Technology instructor James Alexi explains that Youngstown, a rust belt steel mill town in the past, is experiencing a manufacturing revival and his program helps to prepare students for the advanced manufacturing jobs of the present and future.
Check out the hands-on skills that students are learning in Advanced Manufacturing class at William Henry Harrison High School in southwestern Ohio! This exciting class uses the eLearning curriculum and hands-on trainers in Amatrol’s groundbreaking IGNITE: Mastering Manufacturing program.
At Brookfield High School in Ohio, students are forging their way to all kinds of career pathways through credentials, training ,and a fantastic lab space! Take a look at our visit to the high school, hear from students and teachers, and see how they're getting their hands on great opportunities.
Pages
-
Item Number:BH-85 -
Item Number:85-BPAmatrol’s Basic Pneumatics training system (85-BP) introduces pneumatic principles through a combination of Amatrol’s top-flight multimedia curriculum with hands-on industrial pneumatic skill-building. Topics covered in this learning system include single-acting cylinder circuits, pressure vs. cylinder force, and flow control valves, while the panels can be used to practice skills such as connecting and operating a needle valve to control actuator speed. -
Item Number:85-EHThe Electro-Hydraulics training system includes an electrical control panel with relay control components and an electrical valve module with solenoid-operated hydraulic directional control valves and electrical/electronic sensors. These components will be used to study a variety of topics including electrical control systems, basic control devices, power devices, control relays, sequencing control, timer control, pressure control applications, and circuit applications. -
Item Number:CR-35iAFANUC’s new CR-35iA is the world’s first collaborative robot with a payload capacity of up to 35 kg. Fenceless, it opens a whole new world of possibilities. Working safely side by side with human operators, it is space as well as cost saving. And because inside it’s like any other FANUC robot, it operates like all FANUC robots. Certified to meet the requirements of ISO 10218-1:2011 and RIA/ANSI R15.06-2012, FANUC’s CR-35iA collaborative robot can work in a variety of applications alongside human workers including: machine tending, handling heavy payloads that require lift assist devices or custom equipment, higher payload mechanical assembly, palletizing or packing, and tote or carton handling. -
Item Number:CR-4iACR-4iA is a small collaborative robot with 4 kg payload -
Item Number:CR-7iAThe FANUC CR-7iA is FANUC's newest collaborative robot resembles the LR Mate family. Painted green to show it's ability to work beside humans, you can expect the same reliability as FANUC's yellow robots. The CR-7iA is ideal for small part sorting and assembly, inspection, machine tending, and part delivery. It has a 7 kg payload, 717 mm reach, and is equipped with iRVision and Force Sensing. There are a variety of mounting options such as floor, wall, and ceiling. -
FANUC’s new SCARA robots are ideal for high-speed, precision applications such as assembly, pick and place, testing/inspection and packaging processes. -
In the rare event that a burning ember or spark is drawn into the fume extraction unit, there is the possibility that debris in the filters could ignite. Although any resultant fire would typically be retained within the fume extraction unit, this would cause significant damage and in extreme circumstances, the risk may extend beyond the extraction unit. For processes where such risks have been identified, additional protection in the form of an in-line firebox is an additional precaution.
-
The BOFA inline pre-filter 1000 has been designed specifically for applications that generate high amounts of dust or particulate.
This inline filter unit is positioned alongside the main BOFA fume filtration system to increase the overall filter capacity and extend the life of the main filters. The DeepPleat DUO pre-filter incorporates a massive drop-out chamber within the filter, having a volume area of 15ltrs. Above the drop-out chamber but still within the housing there is a sealed 200mm deep pleat layer of F8 media giving a surface area in excess of 30 sq meters.
-
The BOFA inline prefilters have been designed specifically for applications that generate high amounts of dust or particulate.
