950-WT1
It starts with high-strength composite materials, but the Stratasys composite-ready F Series offers much more. More materials, more reliability – more capability than other similar printers.
NOCTI is the leading provider of industry credentials and resources for career and technical education (CTE) programs nationwide. With over 50 years of experience, NOCTI is a pioneer in creating customized and standardized credentialing solutions and is a valuable partner in the CTE community’s efforts to improve America’s workforce.
NOCTI credentials are developed by teams of subject matter experts to meet industry standards and requirements and result in credentials measuring skills and competencies critical for student success outside the classroom.
Our goal is to help training facilities equip CTE students with the skills and knowledge for success. NOCTI credentials measure the skills needed by the future workforce. Students gain confidence in their skills, and educators can validate learning and enhance the credibility of their programs.
Supported Credentials
We offer content and equipment to cover tasks for the following certifications:
- Diesel Technology - Job Ready
- Engineering Technology Foundations
- Manufacturing Technology
- Pre-Engineering/Engineering Technology - Job Ready
- Computer Networking Fundamentals - Job Ready
- Computer Repair Technology - Job Ready
- Cybersecurity Fundamentals
Training Solutions
NIMS credentials set the baseline for your curriculum, provide a method of measuring instructor quality, and enable your students to work towards a national, industry-recognized achievement. Plus, credentials are a foundation for articulating experience into college credit and apprenticeships.
Students can begin earning credentials at any time. Instructor credentials are not required, nor are site inspections. Check out the process of earning a NIMS credential to get started.
NIMS ITM Certifications are available in each of the following duty areas:
Duty Area 1
Maintenance OperationsDuty Area 2
Basic Mechanical SystemsDuty Area 3
Basic Hydraulic SystemsDuty Area 4
Basic Pneumatic SystemsDuty Area 5
Electrical SystemsDuty Area 6
Electronic Control SystemsDuty Area 7
Process Control SystemsDuty Area 8
Maintenance WeldingDuty Area 9
Maintenance Piping
Maintenance OperationsDuty Area 2
Basic Mechanical SystemsDuty Area 3
Basic Hydraulic SystemsDuty Area 4
Basic Pneumatic SystemsDuty Area 5
Electrical SystemsDuty Area 6
Electronic Control SystemsDuty Area 7
Process Control SystemsDuty Area 8
Maintenance WeldingDuty Area 9
Maintenance Piping
These stackable credentials enable students to learn and earn at the same time!
Training Solutions
National Center for Construction Education & Research (NCCER) provides industry-recognized credentials for students and craft professionals.
Supported Certifications
We offer a supplemental curriculum that is 60-70% aligned with the certifications below.
- NCCER Commercial Electrician
- NCCER Core
- NCCER Electrical Level I
- NCCER Electrical Level II
- NCCER Electronic System Technician Level I
- NCCER Electronic System Technician Level II
Training Solutions
The Computing Technology Industry Association (CompTIA) is a leading voice and advocate for the $5 trillion global information technology ecosystem; and the estimated 75 million industry and tech professionals who design, implement, manage and safeguard the technology that powers the world’s economy.
Through education, training, certifications, philanthropy, and market research, CompTIA promotes industry growth, the development of a highly-skilled workforce, and a commitment to creating an environment where innovation happens and the opportunities and benefits made possible through technology are available to all.
Training Solutions
Cybersecurity Fundamentals affirms the learner's understanding and ability to perform in today’s cybersecurity-threatened business and IT environments. To earn the certification, the learner will be able to demonstrate practical competence in security tools, threats, and vulnerabilities, describe risk management processes and practices, and more.
Learners that earned this certificate have demonstrated knowledge of cyber security risk, data, language, and technologies.
Training Solutions
Using AWS Accredited Test Facilities to test and qualify welders allows companies to save money, improve productivity, and reduce liability by entrusting their welder certification to the experts.
Supported Automotive Certifications
- AWS Certified Welder
- AWS D1.1 Structural Steel
- AWS D9.1 Sheet Metal Welding
- AWS SENSE Level 1: Entry Welder
Training Solutions
A CNA, or certified nursing assistant, is an entry-level member of a patient’s healthcare team, performing important patient-centered tasks under the supervision of licensed nursing staff. CNAs work very closely with RNs, physicians, and other healthcare providers.
CNAs ensure their patients' well-being by performing various tasks that help with daily living activities. Because CNAs typically spend more time with patients than nurses or doctors, they understand their behaviors and health statuses. They get to know each patient and are often the first to notice physical or emotional changes. CNAs play important roles in the early detection of symptoms.
Supported Certifications
- Certified Nurse Aide (CNA)
Training Solutions
Pages
-
Item Number:F190CR and F370CR -
The Fall Protection awareness simulation is ideal for future employees and supervisors who will work in or around construction environments. The primary goal of this course is to teach workers safe procedures when working at heights on a construction site. -
Item Number:202-000DAC Worldwide’s Fan Balancing Trainer (202-000) is a precision assembly allowing for convenient demonstration and training in fan balancing and other vibration analysis-related topics. Based on the design of a typical squirrel cage fan, this heavy-duty aluminum device allows for assembly in a variety of configurations, creating a broad range of balancing scenarios. -
Item Number:202-PACDAC Worldwide’s Fan Balancing Training System Plus (202-PAC) is a hands-on industrial training system that allows learners to gain experience with fan balancing to achieve maximum fan efficiency and stability. -
A large working envelope with a reach of 717 mm, and a payload of 7 kg, combine to provide solutions for high productivity handling and assembly applications. -
With FANUC Robotics’ CERT Program, new courses and project based activities prepare students for a workplace that will be increasing in robotic automation. The Fanuc Robotics Education Training Cart incorporates the compact M-1+A robot housed in a self contained, mobile enclosure. The lightweight parallel-link M-1+A robot is designed for small part handling, high speed picking and assembly applications. -
FANUC America now offers Certified Education Robot Training (CERT) to qualifying High Schools, Community Colleges, and Universities. With FANUC America's educational robots, students can learn to utilize the latest automation technology while applying Science, Technology, Engineering, and Math. Industrial robotics training in the classroom can safely be achieved through the CERT program. FANUC America provides the necessary training to the instructor as well as a curriculum to introduce students to robot applications. -
The FANUC CNC Certified Education Training program is an industry certification available to qualified high schools, community colleges, and universities. The program certifies instructors at educational institutions to train their students to program, set-up and operate CNC machine tools using FANUC’s control platform. -
Item Number:D73F-0320-PB00Experience the cutting-edge in CNC machining simulation with FANUC's D73F-0320-PB00 simulator. Equipped with real kinematics, live machine movement, and advanced features like collision detection, immerse yourself in a true-to-life machining experience. Discover the power of virtual milling or lathe operations with our software-only version for seamless integration. Get ready to revolutionize your CNC training! -
Item Number:A02B-0158-B100#USThe FANUC CNC simulator is a perfect addition to the classroom and an essential component to gain maximum exposure to FANUC CNC controls when actual machine time is limited.
