Dissolve PVA supports up to 4x faster with the UltiMaker PVA Removal Station. Safe, chemical-free, and efficient—engineered to reduce operator time by up to 80%.
Having the right tools can make all the difference between life and death. TacMed, a leading medical simulator provider, offers two distinct models tailored to meet the diverse needs of emergency responder or veterinary training: the K9 Diesel and Hero. While both models are crafted with the same commitment to durability, functionality, and effectiveness, they serve unique purposes and cater to different training programs. This comprehensive feature comparison highlights each model's key features, capabilities, and target users.
K9 Diesel
TFX-K9-DSL-1
The Advanced Canine Medical Trainer (K9 DIESEL) is a full-body simulator for Operational Canine First Responders, Military Working Dog (MWD) handlers, Veterinarians, and Veterinary Technicians. Designed in partnership with the Department of Defense (DoD), K9 Diesel is a state-of-the-art skills trainer with active breathing, audio queues, and over 28 different features and medical intervention sites.
All training sites are designed to replicate actual medical procedures' look, feel, and function. Interchangeable limbs and injuries provide greater flexibility to vary wound patterns.
Key Features
- Realistic Airway & Breathing
- Intubation & Tracheostomy
- Simulated Tension Pneumothorax
- NCD, GDV w/ Air Release
- CPR
- Bleeding & Occlusion Feedback
- Bilateral Femoral Pulses
- Interchangeable Limb Options
- Packable Junctional Wounds
- Abdominal Evisceration
- IV Training (Bilateral) w/ Flash
- Bilateral Tibial and Humeral IO
- Real-Time Feedback on Remote
- Optional: Mouth Wound & Burn Sleeve
K9 HERO
TFX-K9-HERO-1
K9 Hero allows learners to perform critical life-saving tasks such as maintaining an airway, needle decompression/thoracocentesis, hemostasis, IV insertion, Intraosseous (I/O) infusion, Cardiopulmonary Resuscitation (CPR), tracheostomy, and bandaging.
Key Features
- Realistic Airway (NPA, OPA)
- Intubation & Tracheostomy
- Packable Wound
- Needle Decompression
- IV Training w/ Flash
- Bilateral Femoral Pulses
- Movable Jaw
- Remote Controlled
- Real-Time Feedback on Remote
- Realistic Skeletal Motion
- Optional: Mouth Wound & Burn Sleeve
The TacMed Simulation™ Advanced Canine Medical Trainer (K9 Diesel) is a full-body simulator for Operational Canine First Responders, Military Working Dog (MWD) handlers, Veterinarians, and Veterinary Technicians. Designed in partnership with the Department of Defense (DOD), K9 Diesel is a state-of-the-art skills trainer with active breathing, audio queues, and over 28 different features and medical intervention sites. All training sites are designed to replicate actual medical procedures' look, feel, and function. Interchangeable limbs and injuries provide greater flexibility to vary wound patterns. K9 Diesel is the most advanced K9 simulator available and allows learners to perform a wide range of critical life-saving tasks with an incredibly realistic experience.
The TraumaFX® Canine Medical Trainer (K9 HERO) is a full-body medical trainer for Operational Canine First Responders, Military Working Dog (WMD) handlers, Veterinarians, and veterinary technicians. All training sites are realistic to replicate actual medical procedures' look, feel, and function. The head of the simulator has been hand-sculpted to mimic a Belgian Malinois, and the exterior is covered in durable, non-staining synthetic fur. K9 HERO allows learners to perform critical life-saving tasks such as maintaining an airway, needle decompression/thoracocentesis, hemostasis, IV insertion, Intraosseous (I/O) infusion, Cardiopulmonary Resuscitation (CPR), tracheostomy, and bandaging.
Immerse yourself in the world of hybrid and electric vehicles with our training system "MobileTrain - Diagnosis and installation of charging stations"! Are you ready to shape the future of vehicle charging and become an expert in the installation and maintenance of charging stations? Then this training system is just right for you!
With the rise of electric vehicles, the demand for competent specialists who are familiar with the installation and maintenance of charging stations is also increasing. Our training system offers you the opportunity to delve deep into the subject matter and learn all about the structure, function and safety aspects of charging stations. From identifying different types of charging stations and connection cables to assessing energy and performance requirements - we cover all the important topics.
You will not only learn about the technical and legal requirements for installation, but also how to connect charging stations in a technically correct way and test communication signals. You will also gain an insight into the protective equipment for charging stations and learn how to carry out maintenance and safety tests in accordance with national regulations. And the best thing? You can start/stop charging with an RFID card or NFC-enabled smartwatch/phone and troubleshoot potential problems on your own.
Our training system is mobile, compact and practical, making it easy to transport and set up. It includes a real practical wallbox with a high-speed charging capability of 22KW (240V 50 Amp) and enables practical commissioning and customer instruction. Thanks to various interfaces such as Ethernet, RS485, Wi-Fi and Bluetooth, networking is possible and you can perform actual vehicle charging with a maximum power of 22KW.
This training system has been specially developed for training electricians and includes not only the wallbox as an individual device, but also the installation of the supply line and its safety devices. It is very practice-orientated and prepares you to professionally inspect, test and maintain the electrical infrastructure for charging stations.
Are you ready to become part of the EV revolution and take your skills to the next level? Then sign up now for our "MobileTrain - Diagnosis and Installation of Charging Stations" training system and become a sought-after expert in the world of electric vehicles!
This video demonstrates a vertical down weld on the MOD-WELD system with a FANUC CRX Cobot.
This video goes over how to start up the CRX MOD-WELD System.
This video demonstrates a simple weld on the MOD-WELD system with a FANUC CRX Cobot.
This video demonstrates how to tack weld on the MOD-WELD system with a FANUC CRX Cobot.
This video demonstrates multi-directional welding on the MOD-WELD system with a FANUC CRX Cobot.
This video demonstrates weaving on the MOD-WELD system with a FANUC CRX Cobot.
Pages
-
-
The UltiMaker S6 delivers high-speed, dual-material 3D printing with advanced motion control, composite-ready extrusion, and a flexible build plate. Built for productivity and precision. -
Discover the UltiMaker S7 — the next evolution in professional 3D printing. Featuring a PEI-coated flexible build plate, integrated Air Manager, and inductive bed leveling for consistent, high-quality results. -
Meet the UltiMaker S8: The fastest desktop dual-material 3D printer with 4x productivity, enhanced accuracy, and seamless workflow integration for professional and educational environments. -
Item Number:ULTRA R5000Tech-Labs technical training solutions. -
Item Number:ULTRA R9000The ULTRA R9000 platform offers laser material processing for a wide range of materials. It is designed and ideally suited for material processing in manufacturing, research and development, academic research, and prototyping environments. With its unique modular architecture, customizable solutions can be easily reconfigured with a wide array of options for enhancing performance, capability, and safety to complete the perfect solution to meet present and future business needs. -
Item Number:ULTRA X6000The ULTRA X6000 platform offers laser material processing for the widest possible range of materials. It is designed and ideally suited for precision material processing in manufacturing, research and development, academic research, and prototyping environments. With its unique modular architecture, customizable solutions can be easily reconfigured with a wide array of options for enhancing performance, capability, and safety. -
Item Number:130-DTU1 | 130-DTU2 | 132-DTT5 | 132-DTT6 | 132-FCCUUnit Operations give operators a peek inside the systems they work with every day. Includes: Distillation Trainers, a Distillation Tray model, and working demonstrators covering Distillation Towers and Fluid Catalytic Cracking. -
With its open multimedia courses, the UniTrain system has pursued this approach for many years, thus enabling it to be deployed in diverse learning scenarios. The multimedia courses are closely aligned with international standards to allow their integration into numerous learning management systems. -
Item Number:200-2083DAC Worldwide’s Urethane Tire Coupling Cutaway (200-2083) highlights a professionally-crafted, sectioned industrial shaft coupling. The full-size, fully-detailed example gives learners a first-hand view into a component that is found in various applications worldwide and supports both instructor-led training and student self-discovery.
