Each Basic Hydraulics training system features standard industrial grade components. This attention to quality gives students experience they would normally only get on-the-job by helping them recognize industrial components and how to troubleshoot them more effectively. Components included with Basic Hydraulics are pre-mounted on circuit panels with silk-screened labels next to each, which facilitates ease of use and identification.
Reduced emissions and decreased fuel usage serve as guiding principles for the forthcoming generation of contemporary vehicles. Hybrid automobiles and electric cars aren't just future concepts—they're already on the roads. However, to effectively diagnose these vehicles, a comprehensive understanding of the necessary systems remains the sole logical strategy.
Lucas-Nülle's CarTrain “Hybrid and Electric Vehicle Trainer (ASE L3)” is an advanced educational system meticulously designed to delve into the intricate workings of hybrid and electric vehicles. This trainer provides an immersive hands-on experience, allowing learners to explore the complexities of these modern automotive technologies. With a comprehensive array of modules covering hybrid drive systems, electric propulsion, battery management, and vehicle control, this innovative training solution offers a deep understanding of the principles and practicalities behind hybrid and electric vehicles.
Thsi training system caters to automotive professionals aiming to achieve ASE L3 certification and equips them with the expertise needed to diagnose, service, and maintain these cutting-edge vehicles effectively. The CarTrain not only prepares technicians for the challenges of today's automotive landscape but also fosters a thorough comprehension of sustainable and future-focused transportation technologies.
Delve into a realm of extensive training possibilities spanning advanced manufacturing, chemical manufacturing, marine, military, oil & gas, and power generation. The DAC 280 has been meticulously crafted to furnish a thorough comprehension of pump sealing systems, imparting invaluable insights and actionable advice.
See the newest addition to Stratasys' line-up - F3300. This introductory video will give you a glimpse of the new F3300 system, in addition to sharing some of its key features and benefits.
Ogle chose Stratasys’ Neo stereolithography 3D printers to maintain its position at the forefront of innovation, and it is now a central part of the company’s ability to meet and exceed customer expectations.
In this video, Amatrol visits East High School in Youngstown, Ohio, to see what’s happening in its Manufacturing Technology class, which uses the eLearning curriculum and hands-on trainers in Amatrol’s groundbreaking IGNITE: Mastering Manufacturing program.
Manufacturing Technology instructor James Alexi explains that Youngstown, a rust belt steel mill town in the past, is experiencing a manufacturing revival and his program helps to prepare students for the advanced manufacturing jobs of the present and future.
Check out the hands-on skills that students are learning in Advanced Manufacturing class at William Henry Harrison High School in southwestern Ohio! This exciting class uses the eLearning curriculum and hands-on trainers in Amatrol’s groundbreaking IGNITE: Mastering Manufacturing program.
At Brookfield High School in Ohio, students are forging their way to all kinds of career pathways through credentials, training ,and a fantastic lab space! Take a look at our visit to the high school, hear from students and teachers, and see how they're getting their hands on great opportunities.
Step into the world of career and technical education at Chardon High School in northeastern Ohio, where The CREW [Creating Reliable Educated Workers] program thrives. Our dedication to advancing education through practical experience is evident in our collaboration with Amatrol's Industry 4.0 Fundamentals program, employing eLearning modules and hands-on trainers.
In an enlightening video, Tracey Britt, a CTE Instructor at Chardon High School, sheds light on The CREW's inception and its pivotal role in equipping students with the knowledge and hands-on skills demanded by local manufacturers. Through personal accounts from students, witness the profound impact of our program in preparing them for the workforce.
Additionally, Britt highlights the program's emphasis on stackable certifications from the Smart Automation Certification Alliance (SACA). These certifications not only pave the way for lucrative employment opportunities but also offer students the chance to earn college credit. Celebrate the success stories, including four seniors who graduated with full-time jobs in manufacturing, a testament to our program's efficacy.
In this video, Mike Idle provides an overview of Amatrol’s Combined Refrigeration Installation Learning System (T7200). This mobile, double-sided trainer teaches users how to install electrical and mechanical refrigeration and air conditioning components for both residential and light commercial applications, making it a great introduction to the field of refrigeration.
Multiple real-world components are included with this system, enabling users to practice hands-on skills they will use on the job. Some of these components include a semi-hermetic compressor, evaporator coil, condenser coil, thermostat, electronic temperature control range, circuit breaker panel, and much more.
Using the included multimedia curriculum, users will learn how to operate a thermostat, prepare and install copper tubing, and cut, pull, splice, and install wiring for multiple different types of applications.
Wired and wireless sensors, OPC Unified Architecture, a PLC, and a lot more - Amatrol's 990-SM10 Portable Smart Manufacturing Training System helps you get hands-on Smart Manufacturing skills to your students in a portable trainer.
Industry 4.0 continues to grow, and your students' automation knowledge will grow with everything this trainer can do. Whether your learners need to know about edge gateways, on-premise and cloud-based infrastructure, or anything else, they'll get their hands on all of with the 990-SM10!
Pages
-
Item Number:BH-85 -
Item Number:85-BPAmatrol’s Basic Pneumatics training system (85-BP) introduces pneumatic principles through a combination of Amatrol’s top-flight multimedia curriculum with hands-on industrial pneumatic skill-building. Topics covered in this learning system include single-acting cylinder circuits, pressure vs. cylinder force, and flow control valves, while the panels can be used to practice skills such as connecting and operating a needle valve to control actuator speed. -
Item Number:85-EHThe Electro-Hydraulics training system includes an electrical control panel with relay control components and an electrical valve module with solenoid-operated hydraulic directional control valves and electrical/electronic sensors. These components will be used to study a variety of topics including electrical control systems, basic control devices, power devices, control relays, sequencing control, timer control, pressure control applications, and circuit applications. -
Item Number:CR-35iAFANUC’s new CR-35iA is the world’s first collaborative robot with a payload capacity of up to 35 kg. Fenceless, it opens a whole new world of possibilities. Working safely side by side with human operators, it is space as well as cost saving. And because inside it’s like any other FANUC robot, it operates like all FANUC robots. Certified to meet the requirements of ISO 10218-1:2011 and RIA/ANSI R15.06-2012, FANUC’s CR-35iA collaborative robot can work in a variety of applications alongside human workers including: machine tending, handling heavy payloads that require lift assist devices or custom equipment, higher payload mechanical assembly, palletizing or packing, and tote or carton handling. -
Item Number:CR-4iACR-4iA is a small collaborative robot with 4 kg payload -
Item Number:CR-7iAThe FANUC CR-7iA is FANUC's newest collaborative robot resembles the LR Mate family. Painted green to show it's ability to work beside humans, you can expect the same reliability as FANUC's yellow robots. The CR-7iA is ideal for small part sorting and assembly, inspection, machine tending, and part delivery. It has a 7 kg payload, 717 mm reach, and is equipped with iRVision and Force Sensing. There are a variety of mounting options such as floor, wall, and ceiling. -
FANUC’s new SCARA robots are ideal for high-speed, precision applications such as assembly, pick and place, testing/inspection and packaging processes. -
In the rare event that a burning ember or spark is drawn into the fume extraction unit, there is the possibility that debris in the filters could ignite. Although any resultant fire would typically be retained within the fume extraction unit, this would cause significant damage and in extreme circumstances, the risk may extend beyond the extraction unit. For processes where such risks have been identified, additional protection in the form of an in-line firebox is an additional precaution.
-
The BOFA inline pre-filter 1000 has been designed specifically for applications that generate high amounts of dust or particulate.
This inline filter unit is positioned alongside the main BOFA fume filtration system to increase the overall filter capacity and extend the life of the main filters. The DeepPleat DUO pre-filter incorporates a massive drop-out chamber within the filter, having a volume area of 15ltrs. Above the drop-out chamber but still within the housing there is a sealed 200mm deep pleat layer of F8 media giving a surface area in excess of 30 sq meters.
-
The BOFA inline prefilters have been designed specifically for applications that generate high amounts of dust or particulate.
