The FANUC Fenceless Collaborative Cert Cart was developed by combining FANUC DCS Position and Speed Check software with an Allen Bradley SafeZone Mini Safety Laser Scanner. The result is FANUC’s NEW FENCELESS CERT Cart, which still fits through a standard door and runs off 110V power. The FENCELESS cart allows a greater work envelope and introduces students to the latest integrated safety products from FANUC and Allen Bradley.
Amatrol’s PLC Learning System – Siemens S7-1500 (87-IOSS715) provides an input/output simulator that allows learners to test PLC programs by providing manual input and output indicators that connect to a Siemens S7-1500 PLC input/output. This Siemens PLC program simulation system adds to Amatrol’s Mechatronics Learning System – Siemens S7-1500 (870-S715) and covers vital PLC training topics like PLC operation, programming, motor control, event sequencing, timer instructions, and counter instructions. The knowledge and skills covered by this PLC training system are extremely valuable for advanced manufacturing career opportunities like industrial maintenance technicians.
In addition to the PLC simulator module, the PLC training system for the Siemens S7-1500 PLC includes interactive multimedia curriculum, an instructor’s guide, an installation guide, and a student reference guide. Amatrol’s world-class multimedia training courses provide real-world technical knowledge that covers theoretical concepts and reinforces hands-on skills. Within this PLC online eLearning curriculum, learners will study PLC communications and program execution, PLC program editing and documentation, seal-in program logic, safety interlocks, multiple actuator sequencing, on-delay and off -delay timers, and count up and count down instructions.
Computer-Based Fault Insertion Software
The Mechatronics Manual Fault Insertion Training Module (87-MF1) adds troubleshooting capabilities to Amatrol’s 870 series Mechatronics system. Mechatronics systems are used in almost every industry including manufacturing, material processing, and packaging. The ability to troubleshoot these systems quickly is essential in today’s competitive markets and the Mechatronics Manual Fault Insertion training can enable your learners to acquire these skills.
The 87-MF1 Module provides the ability to insert 12 faults to a mechatronics station. Add a module to one or all of your mechatronics stations to give learners a real-world troubleshooting experience. Sensors, switches, and PLC faults are just a few of the available faults. To insert a fault, the instructor simply replaces a Standard Circuit Plug in the module with a Fault Plug. Once inserted, the Fault Plug is unidentifiable from the Standard Circuit Plug. This ensures that the learner cannot look at the fault module and see which fault has been inserted, avoiding the common problem of using toggle switches to turn faults on and off.
If you want a more sophisticated fault insertion method that provides computer-based electronic fault insertion and performance tracking, ask about Amatrol’s electronic fault insertion system, FaultPro, the only electronic fault insertion system that automates tracking the learner’s troubleshooting experience.
Amatrol’s Basic Fluid Power Learning System – Single Surface Bench (850-C1) teaches the fundamentals of two bedrocks of industry: hydraulic and pneumatic power. This fluid power training system includes three panels on its work surface and can store up to four additional panels under the work surface for expanded hydraulic and pneumatic training.
The basic fluid power training system includes a controls technology bench with a hydraulic power supply and Amatrol’s basic pneumatics and hydraulics systems. These systems feature industrial-quality components to prepare learners for what they will encounter on the job. Major topics covered by the system’s multimedia curriculum include hydraulic and pneumatic power systems, basic hydraulic and pneumatic circuits, principles of pneumatic and hydraulic pressure and flow, and hydraulic and pneumatic speed control.
Amatrol’s 87-MS1, Mechatronics Pick and Place Feeding, is station 1 of the 870 Mechatronics Learning System. The 87-MS1 station is a small mechatronics system in itself with multiple, integrated technologies that can be used stand-alone or in combination with other stations. Industrial safety and operation are emphasized on all Amatrol mechatronic stations.
Interfacing, Programming, Sequencing & Operation
Amatrol’s 87-MS2, Gauging, is station 2 of the 870 Mechatronics Learning System. The 87-MS2 station is a small mechatronics system in itself with multiple, integrated technologies that can be used stand-alone or in combination with other stations. Industrial safety and operation are emphasized on all Amatrol mechatronic stations.
Index Tables, Stepper Motors, Homing Sensors
Amatrol’s 87-MS3, Mechatronics Orientation-Processing Station, is station 3 of the 870 Mechatronics Learning System. The Mechatronics orientation training station is a small Mechatronics system in itself with multiple, integrated technologies that can be used stand-alone or in combination with other stations. Industrial safety and operation are emphasized on all Amatrol Mechatronic stations.
Mechatronics Sorting and Buffering
Amatrol’s Mechatronics Sorting-Buffering Learning System (87-MS4) is training mobile workstation 4 of the 870 Mechatronics Learning System. The 87-MS4 station is a small Mechatronics system in itself with multiple, integrated technologies that can be used stand-alone or in combination with other stations. In efforts to protect workers and machines, industrial safety and operation are emphasized on all Amatrol Mechatronic stations.
The Sorting-Buffering training station teaches interfacing, problem solving, programming, sequencing and operation for sorting, queuing, flat belt conveyors, photoelectric sensors, and inductive sensors. This station performs the role of sorting parts by material type in the process of assembling a working industrial control valve.
The 87-MS4 is a mobile workstation with slotted work surface that contains an operator station, belt conveyor module, part sorting module, buffer module, proximity sensing module, parts set, a pneumatic distribution module as well as an electrical distribution module, an electro-pneumatic valve manifold, and a digital I/O interface module.
Mechatronics Robotic Assembly
Amatrol’s 87-MS5-P2, Servo Robotic Assembly – Pegasus II, is station 5 of the 870 Mechatronics Learning System. The 87-MS5-P2 station is a small Mechatronics system in itself with multiple, integrated technologies that can be used stand-alone or in combination with other stations. Industrial safety and operation are emphasized on all Amatrol Mechatronic stations. The Servo Robotic Assembly station trains students for pick and place assembly, and teaches interfacing, problem solving, programming, sequencing and operation for servo robotics, gravity feeders, pneumatic screw feeders, and part insertion. This station performs the role of assembling a working industrial directional control valve using a combination of servo robotic and pick and place technologies.
The 87-MS5-P2 has two mobile training workstations with slotted work surfaces that contain an operator station, Pegasus II servo robot with teach pendant, spool insertion module, screw feed module, spring/knob feed module, screw/knob engagement module, assembly shuttle module, parts presentation module, finished parts storage module, parts set, a pneumatic distribution module as well as an electrical distribution module, an electro-pneumatic valve manifold, and a digital I/O interface module.
Interfacing, Programming & Sequencing
Amatrol’s 87-MS6, Torque Assembly, is mobile training station 6 of the 870 Mechatronics Learning System. The 87-MS6 station is a small Mechatronics system in itself with multiple, integrated technologies that can be used stand-alone or in combination with other training work stations. Industrial safety and operation are emphasized on all Amatrol Mechatronic stations.
Mechatronics Technician Training
Amatrol’s Automated Inventory Storage System (87-MS7) is the seventh station of the 870 Mechatronics Learning System and allows learners to gain valuable skills used in inventory storage processes by studying operation, adjustment, and programming of an inventory storage system. This learning system will allow learners to practice and study operating a programmable parts storage station, adjusting a phototransistor optical interrupter switch, and designing a PLC program that provides manual/auto/reset functions for a programmable parts storage station.
This mechatronics learning system features real-world components like infrared sensors, pneumatic grippers and brakes, pick and place storage and more! Learners will use these and other components to practice mechatronics safety, torque clamp module sequencing, station operation, and non-servo electric slide sequencing. Amatrol uses components that learners will find on-the-job in order to give the best opportunity to build confidence and industrial competencies.
Pages
-
-
Students trained on ROBODRILL products will be more productive. Excellent repeatability makes the ROBODRILL suited for milling, drilling, tapping, and boring with flexibility, versatility, and reliability. Specific ROBO DRILL education packages have been configured for the needs of educational institutes teaching 3-axis and 5-axis machining, robotic machine tending, and Connected Smart Manufacturing (CSM). -
Item Number:α-D14MiBThe new-generation FANUC ROBODRILL promises unrivaled quality and precision at great hourly rates. At the heart of every ROBODRILL is a patented high-speed tool changer that can carry 21 tools and offers the best reliability in its class. -
The FANUC Robot Integration Package (25098) allows customers to use a FANUC industrial robot with Amatrol’s 870-series mechatronics stations. This package contains a module enclosure that includes PLC and FANUC interface cables along with a customized program to integrate a customer-supplied FANUC robot with the mechatronics system. Additional features include customized gripper tooling and a safety guard assembly to protect learners. -
The primary goal of this course is to teach workers safe work procedures to be aware of and mitigate warehouse fires in a warehouse environment. The Warehouse Fire Hazard Awareness simulation is ideal for employees or supervisors who work in or around warehouse operations. -
Item Number:356DAC Worldwide’s Fire Tube Boiler Model (356) is a highly-detailed scale model of a common fire tube, Scotch marine boiler, supporting training in the operation and maintenance of industrial boilers, as found within utility systems in industrial facilities and large commercial applications. -
Item Number:291DAC Worldwide’s Fired Heater Model (291) depicts a highly-detailed, to-scale model of a common industrial furnace found in refineries and process facilities in technically-accurate, professionally-crafted detail. -
Train fire and EMS drivers safely with the Acron Aviation FireSim™ Series 8 Simulator. Includes emergency response scenarios, vehicle configuration options, and Replay Studio™ for after-action reviews. -
The primary goal of this course is to teach workers the correct procedures to follow in a potential bloodborne pathogen event. The Bloodborne Pathogen VR simulation is ideal for future employees or supervisors who will work in hazardous environments where a potential bloodborne pathogen event may occur. -
VR Hard Hat's First Aid: CPR & AED course aims to equip participants with the knowledge and hands-on skills required to effectively administer CPR and operate an AED during cardiac emergencies.
