It starts with high-strength composite materials, but the Stratasys composite-ready F Series offers much more. More materials, more reliability – more capability than other similar printers.
Somos® TaurusTM brings the combination of thermal and mechanical performance that until now was not possible with stereolithography materials. Its robustness combined with a charcoal grey appearance makes it ideal for the most demanding functional prototyping and even end-use applications.
An optically clear stereolithography material tailored for colorless, functional parts with excellent temperature resistance.
Somos® WaterClear Ultra 10122 is an optically clear stereolithography material that is easy to use and fast to build. This material produces colorless, functional, and accurate parts that simulate an acrylic appearance. Parts produced with Somos® WaterClear Ultra 10122 exhibit excellent temperature resistance.
Somos® WaterClear Ultra 10122 is ideal for applications such as master patterns, concept, and functional models. This material also provides refractive values similar to engineered plastics for functional testing in optical light transmission work.
Somos® WaterClear® Ultra 10122 is an optically clear stereolithography material that is easy to use and fast to build. This stereolithography material produces colorless, functional, and accurate parts that simulate an acrylic appearance. Parts produced with Somos WaterClear Ultra 10122 exhibit excellent water and temperature resistance.
Somos® WaterShed AF is a multi-purpose stereolithography resin that meets the requirements for investment casting patterns. With processing and properties similar to Somos® WaterShed XC 11122, this resin can also be used for general-purpose prototyping and other applications.
Somos® WaterShed® AF is a multi-purpose stereolithography resin that meets the requirements for investment casting patterns, as it is antimony-free. Patterns created with Somos WaterShed AF leave much lower ash residue after burnout, reducing clean-up and speeding up mold production.
Multipurpose resin that prints 50% faster than alternatives eliminating the need for painting.
Somos®® WaterShed XC 11122, has up to a 50% faster processing speed, offering minimal finishing and more consistent processing over time. Compared to alternatives currently on the market, Somos® WaterShed Black prints a more true black color off the machine. The material offers a smooth surface finish and higher moisture and chemical resistance.
Somos® WaterShed® Black provides a solution to build rigid, tough parts, while eliminating the need for painting. With similar properties and processing as Somos® WaterShed® XC 11122, this multipurpose resin provides the same benefits in a black stereolithography material.
Somos® WaterShed® XC 11122 is the clear solution for designers looking for ABS and PBT-like properties for stereolithography technology. One of our most popular resins, Somos WaterShed XC 11122 produces highly detailed parts with superior clarity and water-resistance.
As one of the industry’s most popular materials, Somos® WaterShed® XC 11122 is the clear solution for numerous applications. Whether you’re a designer looking for highly detailed parts with superior clarity and water resistance or an engineer focusing on durability for functional testing, Somos® WaterShed XC 11122 mimics the look and feel of clear thermoplastics, such as ABS and PBT.
Somos® WaterShed® XC 11122 produces optically clear parts with a smooth finish, and it’s ease of use helps to shorten product development and testing. This versatility means Somos® WaterShed® XC 11122 is the ideal material in markets such as automotive, aerospace, and consumer electronics for applications including packaging, RTV patterns, durable concept models, wind tunnel testing, and investment casting patterns.
In motorsports – as in automotive, rail, and aerospace – speed is key. Getting ready for a race, from design to the track, you need to be the fastest. Printing your wind tunnel models with Somos® PerFORM Reflect saves more than 30% post-treatment. So, you can get your aerodynamic designs onto your vehicle faster – and be more competitive on the track, road, rail, or air.
In Formula One, a car body is typically printed at 60% of its normal size for simulation purposes and checked with particle imaging velocimetry (PIV) in critical areas. Somos® PerFORM Reflect is a new and unique stereolithography material developed specifically for 3D printing parts for wind tunnel testing with PIV. With this innovation, Stratasys again sets a standard in enabling faster aerodynamic design optimizations – in motorsports and beyond.
Somos® PerFORM Reflect produces strong, stiff, high-temperature resistant composite parts that are ideal for wind tunnel testing. Extensive tests show that the new Somos® PerFORM Reflect reduces post-processing by more than 30%, eliminating the need for additional PIV coatings. This translates into faster data collection, decreasing overall lead time per design iteration and allowing customers to conduct iterations faster.
Somos® PerFORM Reflect utilizes patented new technology that reduces and even eliminates much of the finishing work required with traditional materials. Based on Stratasys’ industry-standard Somos® PerFORM, Somos® PerFORM Reflect demonstrates all the performance attributes that customers rely on, such as low viscosity, low settling, fast processing, high stiffness, and heat resistance.
Pages
-
Item Number:F190CR and F370CR -
The Fall Protection awareness simulation is ideal for future employees and supervisors who will work in or around construction environments. The primary goal of this course is to teach workers safe procedures when working at heights on a construction site. -
Item Number:202-000DAC Worldwide’s Fan Balancing Trainer (202-000) is a precision assembly allowing for convenient demonstration and training in fan balancing and other vibration analysis-related topics. Based on the design of a typical squirrel cage fan, this heavy-duty aluminum device allows for assembly in a variety of configurations, creating a broad range of balancing scenarios. -
Item Number:202-PACDAC Worldwide’s Fan Balancing Training System Plus (202-PAC) is a hands-on industrial training system that allows learners to gain experience with fan balancing to achieve maximum fan efficiency and stability. -
A large working envelope with a reach of 717 mm, and a payload of 7 kg, combine to provide solutions for high productivity handling and assembly applications. -
With FANUC Robotics’ CERT Program, new courses and project based activities prepare students for a workplace that will be increasing in robotic automation. The Fanuc Robotics Education Training Cart incorporates the compact M-1+A robot housed in a self contained, mobile enclosure. The lightweight parallel-link M-1+A robot is designed for small part handling, high speed picking and assembly applications. -
FANUC America now offers Certified Education Robot Training (CERT) to qualifying High Schools, Community Colleges, and Universities. With FANUC America's educational robots, students can learn to utilize the latest automation technology while applying Science, Technology, Engineering, and Math. Industrial robotics training in the classroom can safely be achieved through the CERT program. FANUC America provides the necessary training to the instructor as well as a curriculum to introduce students to robot applications. -
The FANUC CNC Certified Education Training program is an industry certification available to qualified high schools, community colleges, and universities. The program certifies instructors at educational institutions to train their students to program, set-up and operate CNC machine tools using FANUC’s control platform. -
Item Number:D73F-0320-PB00Experience the cutting-edge in CNC machining simulation with FANUC's D73F-0320-PB00 simulator. Equipped with real kinematics, live machine movement, and advanced features like collision detection, immerse yourself in a true-to-life machining experience. Discover the power of virtual milling or lathe operations with our software-only version for seamless integration. Get ready to revolutionize your CNC training! -
Item Number:A02B-0158-B100#USThe FANUC CNC simulator is a perfect addition to the classroom and an essential component to gain maximum exposure to FANUC CNC controls when actual machine time is limited.
