Amatrol's 990-DRV1F features industry-standard components like a Rockwell PowerFlex 4 variable frequency AC drive and a 3-phase AC motor used to teach the fundamentals of configuring and operating an AC drive. The 990-DRV1F uses FaultPro, Amatrol’s electronic fault insertion, to teach motor drive troubleshooting skills, such as drive input, motor input, and drive relay troubleshooting.
Preliminary information, subject to change
Processed with SAF™ technology on the Stratasys H350 3D printer, Stratasys High Yield PA11 delivers production-grade plastic parts for high-volume demands — driving new areas of business growth. Stratasys High Yield PA11 enables a high nesting density while maintaining high part consistency to deliver production-level yields.
In additive manufacturing, PA12 is the go-to material for prototyping. But in traditional high-volume production of end-use parts, PA11 is much more widely used due to its higher ductility and higher impact resistance, as well as its suitability for a wider range of industry applications. PA11 is also eco-friendly and 100 percent bio-based from sustainable castor oil.
The mechanical data below provides a good characterization of the entire build volume across multiple printers. It was generated after measuring more than 2000 tensile specimens (972 in X/Y and 1,080 in Z direction), 540 flexural specimens (360 in X/Y and 180 in Z) and 540 impact specimens (360 in X/Y and 180 in Z), all printed in 36 builds from 5 different printers. These specimens were widely and regularly distributed throughout the build volume, in a 12% nesting density build and produced with default printer settings.
SAF™ PA12 is available for use with the H350, a material offering numerous benefits, most notably in delivering a high level of accuracy. Tight thermal control on the H350 leads to consistent parts and high nesting densities, and thus more parts per build. The following data highlight the capability of SAF™ PA12.
Stay competitive with best-in-class consistency
Grow your part production business for various industries and applications with a workflow you can fully control. Built for high-volume, short-run production, the Stratasys H350 3D printer gives you control of your materials, workflow, production, and costs while delivering consistency and accuracy print after print. The Stratasys H350 is the first release of the H Series™ production platform, which has Selective Absorption Fusion™ SAF™ technology at its heart to deliver functional, production-grade parts with best-in-class* consistency.
As with other manufacturing techniques, the 3D printing process can be challenging and demands a level of expertise and familiarization.
This guide aims to help designers produce quality, cost-effective parts on the Stratasys® H350™ 3D printer. The guide provides information for both new and experienced users.
The topics covered in this guide describe tools and methods for optimizing design features, strength, and durability of printed parts and ensuring that the parts meet your expectations. It provides best practices and tips on designing for additive manufacturing and examples of how to take advantage of Stratasys' unique features to get the most out of your H350 printer while minimizing printing costs and post-processing issues.
The Stratasys H350™ 3D printer, leveraging Selective Absorption Fusion™ SAF™ technology, as part of the H Series™ production platform, is designed to deliver functional, production-grade parts with best-in-class* consistency. Grow your part production business and stay competitive with a workflow you can control and cost per part you can accurately predict.
The H350 lets you tailor your production to suit your application. Re-use unfused powder to reduce material costs. Fine-tune print settings to your specification – all whilst using SAF technology to achieve accurate, functional parts consistently. Select finishing processes and equipment to maximize production efficiency in your business.
The need for movable parts is a constant when it comes to prototyping. Being able to ensure the proper fit for parts within a component can save both time and money. Whether you’re in the electronic, automotive or consumer goods industries, the Somos® 9120™ Series provides the ultimate solution for form, fit and function with parts that are semi-flexible.
A translucent stereolithography material for when you need to see the inner workings of the part you’re creating.
Somos® 9120 is a transparent stereolithography resin that is easy to use and fast to build. This stereolithography resin produces translucent, accurate parts that are semiflexible. Parts produced with Somos® 9120 exhibit excellent water and temperature resistance and mimic polypropylene.
Somos® 9120 is ideal for applications such as fluid flow analysis, electrical casings and automotive parts. As this material is semi-flexible, it can also be used for snap-fit functional testing.
Every material comes with a safety data sheet (SDS) to provide you with information to properly handle that specific liquid stereolithography resin. While there are risks of skin sensitization, these can be easily prevented with good housekeeping, good hygiene and use of personal protective equipment (PPE).
Formulated differently than conventional materials, UV-curable products require particular instruction for their safe handling. The information provided in this guide is designed to acquaint you with UV-cure technology, identify its potential hazards, and provide general direction and guidelines for the safe application and efficient use of solvent-free, UV-curable products.
This booklet is a guide for safe handling only. The precautions outlined here should be followed in close combination with instructions provided on our product labels and Material Safety Data Sheets (MSDS), as well as in consultation with your representative regarding your specific product.
Somos® BioClear has passed cytotoxicity, irritation, sensitization, and USP VI. A toxicological profiling of the components has been performed. A Device Master File to support this material is accessible through the FDA. Ask a sales representative for more information.
Steps in the production process of 3D printed parts can influence the final part safety. This document gives guidance on areas to pay attention to when using Somos® BioClear.
Pages
-
Item Number:990-DRV1F -
Item Number:990-ACDC1With the 990-ACDC1 learning system, you can teach the basics of AC and DC electrical systems in industrial, commercial, agricultural, and residential applications. The system offers industry-relevant skills including how to operate, install, design, and troubleshoot fundamental AC and DC electrical circuits for various purposes. -
Item Number:616-000DAC’s Portable Calibration Training System (616-000) is a portable tabletop instrument calibration workstation that allows for convenient testing and calibration of instruments, process controllers, and other instrumentation and process control-related components. -
Item Number:990-MC1FSLAmatrol’s Portable Electric Motor Control Troubleshooting Training System (990-MC1FSL) features typical industry components like a 3-phase AC squirrel cage motor. It uses 3-phase AC for power and 24 VDC for control, all packed within a space-saving, portable product. The real-world motor control components will prepare learners for work in industries where electric relay control applications are used, like conveyor control and driving large utility pumps. Teach students how to read and interpret ladder diagrams.
-
Item Number:990-EC1FAmatrol’s Portable Electric Relay Control Troubleshooting Training System (990-EC1F) covers concepts widely used in industrial, commercial, and residential applications to regulate electric motors and fluid power actuators, as well methods used for troubleshooting problems in relay control components and systems. -
Item Number:990-SN1Amatrol's 990-SN1 includes various electronic sensors, such as capacitive proximity, inductive proximity, magnetic reed, hall-effect, and photoelectric. These sensors can be used with a provided test materials to teach how each sensor completes industrial tasks. Combined with Amatrol’s curriculum, this innovated tool provides a thorough understanding of electronic sensor applications. -
Item Number:990-BH1Amatrol’s Portable Basic Hydraulics Learning System allows learners to gain skills by studying basic hydraulic circuits, pressure control circuits, hydraulic schematics, and sequence valves. The system includes a robust, portable case, eLearning curriculum, and student reference guides. -
Item Number:990-PC1Amatrol’s Portable Process Control Troubleshooting Learning System – Level & Flow (990-PC1F) provides a skill-rich, portable troubleshooting training system for two of the most common types of process control systems, flow and liquid level. -
Item Number:990-PAB53AFAmatrol’s Portable PLC Troubleshooting Learning System - AB CompactLogix L16 (990-PAB53AF) teaches programmable logic controller (PLC) programming, operation, and applications used throughout industry. -
Item Number:990-PABCL1FAmatrol’s PLC Troubleshooting Learning System for the AB CompactLogix provides comprehensive PLC operation and troubleshooting knowledge in a portable format for when training space is constrained, but skill-building cannot be sacrificed! Learners will study topics like Programmable Controller Operation, PLC Ethernet Communication, Basic PLC Project Elements, PLC Motor Control, Event Sequencing, and more!
