DAC Worldwide’s Flange Bolt Torquing (226-000) is a training package that includes a complete assortment of fixtures, tools, accessories, and technical data for training in proper bolt torquing using an eight-bolt pattern.
The Backfilling 1 module of Simlog’s Bulldozer Personal Simulator introduces trainees to essential earthmoving tasks in a controlled, virtual setting. Operators learn how to manage blade position, material flow, and movement control to efficiently backfill trenches and depressions—skills critical on real-world construction sites.
This video demonstrates how the simulator reinforces key techniques like forward pushing, blade leveling, and maintaining smooth, consistent backfill layers. With a focus on safety, precision, and production efficiency, this module helps new operators gain confidence while reducing risk and training costs.
Simlog Mobile Crane Personal Simulator's Pole Topping Module has trainees lifting a rubber tire load onto the tops of a series of poles in order. The target pole is marked with blue rings that will turn green once the pole has been topped.
Simlog Mobile Crane Personal Simulator's Pole Placement Module has trainees carefully lift the pole off the ground and then place it into the target hole (the target changes color as the pole gets closer) while avoiding obstacles and unstable positions.
Simlog Mobile Crane Personal Simulator's Corridor Following 4 Module has trainees move the concrete bucket along the three-section, z-shaped corridor on the ground from one end to the other, keeping the bucket at a constant height directly above the corridor while controlling sway.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Mobile Crane Personal Simulator's Pick, Lift, and Place Module has trainees configure the boom angle, extension mode, and length and then place the hook in the rigging target (blue sphere) above the load. Once triggered, lift the load and place it into the target. Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Signaling Module has trainees move a load to a target destination hidden from the view of the crane operator, and so a signal person is required.
The signal person must view the lift using the dedicated signal-person display and provide hand or voice signals to the crane operator to safely move the load into the target (the target changes color as the load gets closer).
Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the crane operator activates the horn. Telescope extend/retract control is disabled for this module.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Off-Highway Truck Personal Simulator's Corridor Driving 1 Module has trainees drive the truck through the corridor to the target. Each trial ends when the truck is over the target and parked (gear in Park, or gear in Neutral with parking brake engaged).
Simlog Off-Highway Truck Personal Simulator's Complete Haul Cycle 2 Module has trainees drive the truck from the dumping zone to the wheel loader. After the truck is fully loaded by the loader, return the dumping zone, dump the load and drive away.
Simlog's Reach Lift Truck Personal Simulator: Slalom 1 Forward Driving - pick up the load, drive forward through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Slalom 2 - Pick up the load, drive in reverse through the slalom course, and place the load on the floor at the target position defined by a red outline.
Pages
-
Item Number:226-000 -
Item Number:225-000DAC Worldwide’s Flange Bolt Torquing Trainer (225-000) is a heavy-duty learning aide that allows for in-depth training in bolted joint torquing, gasket selection/usage, and torque wrench usage. -
Item Number:225-PACDAC Worldwide’s Flange Bolt Torquing Training System Plus (225-PAC) is a heavy-duty learning aide that allows for in-depth training in bolted joint torquing, gasket selection/usage, and torque wrench usage. -
Item Number:864-PACDAC Worldwide’s Flange Sample Board (864-PAC) provides a hands-on teaching aid for piping system training, pipe fitting training, and process operations training. This industrial process system training supplement includes 15 different types of flanges on two rack-mounted panels with magnetic identification tags. -
Item Number:294Hands-On Technical Trainers -
Item Number:295-753DAC Worldwide's Floating Ball Valve Cutaway (295-753) is a sectioned valve sample for training in the operating characteristics, construction, and maintenance of industrial floating-type ball valves. -
Item Number:295-202DAC Worldwide's Floating Head Bulk Storage Tank Model (295-202) is a highly-detailed scale model of a common floating head storage tank. -
Item Number:RAP/4000This self-contained system facilitates the study of pressure drop due to flow restrictions through valves, strainers, fittings, and pipe of varying diameters, different surface roughnesses, and lengths. The system also facilitates the study of flow rate measurement methods such as orifice assembly, venturi meter, variable-area flow meter, and by calibrated tank vs. time. -
Item Number:200-2082DAC Worldwide’s Fluid Coupling Cutaway (200-2082) is an actual industrial fluid coupling that has been cut away to unveil its primary internal components and to show how it operates. -
Item Number:208-110The replica duplicates all primary structural details on an actual, full-size coupling. Importantly, learners can completely disassemble and reassemble the replica, allowing them to develop skills they will use in the workplace.
