With Amatrol’s Residential Mini-Split Heat Pump Learning System (T7130) you can teach the critical hands-on technical skills HVAC/R technicians need when working with residential ductless (“mini-split”) HVAC systems. Students will work with real equipment, including a heat pump condenser, evaporator unit, thermostat, panel-mounted gauges, and condensate pump.
Discover how the NeuroMaker Hand 2.0 empowers students to build, code, and innovate with real-world biomedical technology. This printable brochure introduces key features of the NeuroMaker Hand, including its plug-and-play BioSensor integration and immersive, project-based curriculum.
What You'll Find:
- Highlights of hands-on STEM and CTE learning with prosthetic and biosensor technology
- Overview of coding tools: block-based programming and browser-based Arduino C SDK
- Details on classroom-friendly packaging, reusability, and modular design
- How students address real-world challenges faced by amputees and design inclusive solutions
- Access to student competitions focused on empathy, impact, and innovation
This is a great one-pager to share with educators, grant committees, and educational decision-makers looking for STEM programs with social purpose and advanced skill development.
Ready for a demo or classroom consultation? Contact us today to bring NeuroMaker into your school or program.
Align NeuroMaker STEM Lessons to CTE Pathways
Bridge classroom learning with real-world career pathways using the NeuroMaker Hand CTE Curriculum Crosswork. This resource maps each hands-on module in the NeuroMaker Hand 2.0 program to high-demand CTE pathways such as Engineering & Technology, Biotechnology Research & Development, Programming & Software Development, and more.
Each module outlines the 21st-century skills students will develop—such as critical thinking, collaboration, digital literacy, and innovation—while highlighting corresponding career tracks, salary data, and job outlooks from O*NET. Whether you’re writing a grant, aligning to CTE frameworks, or enhancing STEM/CTE integration, this document is an essential tool for educators, administrators, and program planners.
Train for Precision in Tight Indoor Environments
This simulator focuses on electric, stand-up counterbalanced lift trucks, widely used in manufacturing and shipping facilities. With Simlog’s simulation technology, operators can practice turning, loading, and stacking in confined spaces—all while building the muscle memory and judgment needed for safe forklift operation. It's a cost-saving solution that helps new hires ramp up faster and more confidently.
The Slalom 2 – Reverse module is designed to enhance backward driving control and forklift maneuverability. This advanced exercise pushes operators to refine their steering accuracy, mirror usage, and spatial awareness under pressure.
In this video, viewers see how trainees navigate a series of reverse turns, simulating the kind of tight path navigation required in real-world loading zones. The simulator builds the confidence and control needed to reverse safely in active warehouse environments.
Simlog’s Shipping Container Unloading module teaches safe material handling in one of the most challenging forklift tasks: working within the tight confines of a container. Operators are tested on their ability to maneuver, lift, and place loads with minimal clearance on all sides.
The demo illustrates how this scenario builds core competencies such as steering precision, load stability, and forward planning—equipping users with skills needed for ports, warehouses, and freight centers.
The Dry Van Trailer Loading module challenges trainees to operate in confined trailer spaces, simulating real-world shipping environments. Users must maintain forklift control while navigating tight clearances and stacking pallets safely inside the trailer.
This demo captures how the simulator replicates critical aspects of trailer loading—including smooth entry/exit, pallet alignment, and managing limited visibility—ensuring learners are job-ready from day one.
In the Selective Pallet Racks 1 module, operators learn how to accurately handle pallets in a high-density storage system. This simulation enhances spatial awareness, vertical lifting accuracy, and horizontal control—key skills for maintaining warehouse productivity and avoiding costly errors.
The video demonstrates how the simulator helps users build consistency and confidence when placing and retrieving pallets from various rack levels, including proper fork alignment and depth control.
Simlog’s Stand Up Counterbalanced Lift Truck Personal Simulator is a powerful training tool designed to build core competencies in forklift operation. The simulator replicates key tasks and environments found in modern distribution centers, giving trainees the chance to develop safety-conscious, real-world skills through virtual practice.
From navigating tight spaces to managing pallet placement at height, the simulator covers a wide range of operational challenges. This overview video introduces the simulator interface, learning objectives, and hardware setup—offering a preview of how this solution brings hands-on training to life in classrooms, labs, and industrial facilities.
The Drive-In / Drive-Through Racks module trains users on the complexities of maneuvering in tight warehouse aisles with limited visibility. This simulation emphasizes alignment, precision, and safe entry/exit from racking systems, skills essential for real-world efficiency and safety.
This demo shows operators navigating into the racking system with care, placing and retrieving loads while avoiding collisions—perfect for reinforcing best practices in space-restricted warehouse environments.
Electronics PLC Programming & Troubleshooting Training
Amatrol’s Electronics PLC Programming and Troubleshooting systems deliver industry-relevant, hands-on training with real-world components from leading manufacturers like Allen-Bradley, Siemens, and Mitsubishi. These systems teach critical automation skills including PLC operation, ladder logic programming, motor control, analog and digital I/O, event sequencing, and systematic troubleshooting—all essential for success in modern manufacturing and industrial environments.
From fully integrated workstations to portable learning systems, Amatrol offers flexible solutions that support in-depth learning in both classroom and on-site settings. Each system features interactive multimedia curriculum and FaultPro software for realistic fault insertion and diagnostics practice, ensuring learners build confidence in diagnosing and resolving real-world automation issues. Prepare students or trainees for tomorrow’s workforce with advanced PLC training that meets the needs of today’s technology.
Pages
-
Item Number:T7130 -
Item Number:950-SH1Amatrol’s Steam System Training System (950-SH1) introduces learners to the operation, installation, maintenance, and repair of steam systems and their application in paper mills, commercial and residential settings, power companies, and even nuclear submarines. -
Item Number:F170 / F370The Stratasys F Series is the ultimate, all-in-one rapid prototyping system for your entire team. It combines the power of FDM with the ease of GrabCAD Print for the most versatile and intelligent solution available. -
Item Number:J55The Stratasys J55 Prime 3D printer introduces full color, high fidelity with tactile, functional, and sensory capabilities - making the efficiency and quality of PolyJet Technology more affordable and office-friendly than ever. -
Item Number:J850 DAPThe Stratasys J850™ Digital Anatomy™ 3D Printer combines materials and software to create 3D medical models of human anatomy that mimic bone and tissue with realism you can see and feel. -
Item Number:T7081Understanding HVAC/R, geothermal, refrigeration, and steam systems requires a good hold on the basics. With Amatrol's T7081 Applied Thermal Science Trainer, you can provide the hands-on training your students or employees need. -
BOFA’s Advantage 350 fume extraction and filtration system effectively removes potentially harmful fumes and particulates created during the laser marking process. By maintaining a dust-free operating area, the system helps to protect valuable equipment, maintain a higher quality mark, and reduce the number of rejects and contaminants.
The quiet and compact Advantage 350 is ideal for use in light-duty laser marking applications, including schools, sign making workshops and small-scale industrial environments.
-
Our largest high-volume fume extractor with unique Gullwing filter access design making filter exchange quick, safe and easy.
BOFA’s AD 4000 laser fume extraction unit combines large filter capacity with high airflows. This combination makes the AD 4000 ideal for large laser engravers, laser cutters as well as multiple laser coding installations.
Easily accessible filters are accommodated by the uniquely styled gas spring assisted ‘Gull Winged’ doors, which allow for maximum space and ease when changing filters.
-
BOFA’s AD 1000 iQ high end laser extraction system combines extremely large filter capacity with high airflow and pressure rates, making it the ideal choice for heavy-duty applications that generate large amounts of particulate and gaseous organic compounds.
Performance has now been further enhanced with the inclusion of several new features including BOFA’s new iQ Operating System, making the new AD 1000 iQ one of the most advanced system available.
-
The AD Access combines economic ownership with performance to match the small laser user. A three-stage filter condition indicator is included as a standard feature, together with three stage filtration: DeepPleat pre-filter, HEPA and chemical section.
